Paul N. Gardner Co., Inc.

Thickness Gauge measures non-magnetic and insulating coatings.
Test & Measurement

Thickness Gauge measures non-magnetic and insulating coatings.

Featuring backlit display and 1 m sensor cable, MiniTest 650 is available with magnetic-induction sensor for measurements on steel substrates, eddy current sensor for measurements on non-ferrous metals, or dual sensor for measuring on both steel and non-ferrous metals. One-pole sensor is made of wear-resistant carbide material to ensure virtually unlimited life cycle under normal conditions. Via...

Read More »
Test & Measurement

Portable Resistivity Meter helps determine corrosion rate.

Consisting of fully integrated 4-point Wenner probe, Resipod measures electrical resistivity of concrete in non-destructive test. During operation, current is applied to 2 outer probes and potential difference is measured between 2 inner probes. Current is carried by ions in pore liquid, and calculated resistivity depends on spacing of probes. Packaged in waterproof housing, Resipod operates in...

Read More »
Coating Thickness Gage also measures surface roughness.
Test & Measurement

Coating Thickness Gage also measures surface roughness.

Supplied with glass calibration plate and leather pouch, Model SP1560 TQC Surface Profile and Coating Thickness Gage uses 2 different tips, one for surface roughness and another for coating thickness. Unit has 0.3 in. stem diameter and M2.5 x 0.45 thread. Precision-machined gauge provides measurement range of 0-0.13 in. with 0.04 mil resolution and 0.2 mil accuracy.

Read More »
RX-i series Digital Refractometers
Optics & Photonics

RX-i series Digital Refractometers

NEW - TOUCH-SCREEN TECHNOLOGY Complies with: HACCP; GMP; GLP Standards 4 MEASUREMENT MODE OPTIONS MODE-1 For maximum accuracy Displays the measurement value once the sample reaches the target temperature MODE-2 For fast results Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-S For emulsion samples Displays...

Read More »
Coating Thickness Gauges measure all metal substrates.
Test & Measurement

Coating Thickness Gauges measure all metal substrates.

Ready to measure with no calibration adjustment required for most applications, POSITECTOR 6000 III Series includes versions for ferrous metals, non-ferrous metals, or for all metal substrates. Standard models feature monochrome display and can store 250 readings, while advanced models, with reversible color LCD, store 100,000 readings and enable data transfer via USB to PC or via Bluetooth to PC...

Read More »
Oil Content Anlayzer features 0-200 mg/l dynamic range.
Laboratory and Research Supplies and Equipment

Oil Content Anlayzer features 0-200 mg/l dynamic range.

With warm-up time of less than 30 min, self-diagnostic OCMA-310 assesses amount of trace hydrocarbons in soil or water and also checks for residual hydrocarbons on pre-cleaned products. Extraction of oil can be done by Freon 113 or S-316, and used volumes of latter may be recycled by HORIBA's optional solvent reclaimer. Pyro-electric sensor gives full dynamic range from 0-200 mg/L, and manual...

Read More »
Abraser Attachment accommodates angle changes.
Machinery & Machining Tools

Abraser Attachment accommodates angle changes.

Attached directly to spline shaft of Taber Linear or Reciprocating Abrasers, Precision Knuckle Attachment suits instances where Universal Attachment is not sufficient, change in angle is required, or creative approach is required. Threaded post and nut are included to affix end-user's choice of abrading material, and ball allows for 180° swing which is locked in at desired angle by set...

Read More »
XVL Series Paint Mixing Equipment
Electronic Components & Devices

XVL Series Paint Mixing Equipment

XVL-10 (Round) One Gallon Vortex Mixer o Ideal for mixing all types of architectural paints and primers o Mixes round one gallon, quart & pint containers (quart & pint adapter included) o Smallest footprint of any one gallon mixer - allows unit to fit under or on top of a countertop surface o Quiet operation allows the XVL to be placed in the retail area without interrupting customer interaction...

Read More »
Food Processor includes batch and continuous feed bowl.
Computer Hardware & Peripherals

Food Processor includes batch and continuous feed bowl.

Designed with clear Lexan® polycarbonate bowl, MX-FP2200 accommodates up to 4 quarts of wet ingredients or 6 quarts of dry ingredients. Unit processes up to 1,400 lb per hour with continuous feed attachment. Two-handled batch bowl provides safe grip and balance when lifting, pouring, or carrying, while safety interlock prevents machine from operating unless correctly assembled. Processor...

Read More »
Torsional Stiffness Tester measures rigidity of leather samples.
Test & Measurement

Torsional Stiffness Tester measures rigidity of leather samples.

Torsional stiffness apparatus 108 measures flexibility and stiffness of leather or other bendable specimen. Mounted to rigid stand, instrument includes torsion head with dial protractor that is turned in plane normal to device's fixed torsion wire, until specimen is twisted 90°. Torsion values are obtained by measuring applied angular twist required to reorient sample 90° or other...

Read More »

All Topics