The MTL Instruments Group PLC
Hampton, NH 03842
Share:
Surge Protector eliminates threat of power crossover.
Self-healing SSP series, suited for general Process I/O applications and higher voltage signal applications for SCADA run over private wire networks,- eliminates surge protection device failures due to continuous overvoltage/over current conditions while adding current limiting protection to circuit. If communication lines are subjected to induced AC power or AC power-cross, SSP responds and...
Read More »HART Multiplexer features SIL3 rating.
Featuring channel to channel isolation, MTL4850 is suitable- for connection to instrument loops performing safety functions up to and including SIL3. Multiplexer ensures there is no effect on analog loops to which it is connected; multiple concurrent faults in components that couple unit to loops would have to be present before isolation would be compromised. Supporting HART Rev. 5-7 devices,...
Read More »
MTL Offers Gecma HMI System with 22 Widescreen Display
GeCma components GmbH, the HMI division of MTL Instruments, is pleased to announce the availability of a 22 wide screen option for its market leading Challenger range of remote HMI data terminals. GeCma is the recognized market leader for visualisation systems in hazardous areas as can be seen from its installed base of over 15000 units worldwide. Being based upon the range of HMI's of the same...
Read More »
Fieldbus Power Supply offers redundancy, online diagnostics.
Suited for general-purpose and hazardous area High Energy Trunk architectures, 9180 Series provides redundant power for 8 FOUNDATION(TM) fieldbus H1 segments via 2 groups of up to three 919x-FP 4-segment power modules operating in N+1 redundant configuration. Modularity accommodates redundant applications requiring 250-500 mA or up to 250 mA current per segment. Along with failure alarms and...
Read More »
HMI System handles latest process control systems.
Suited for use in hazardous areas, MTL GeCma Challenger 221 offers 22 in. color display with 1,680 x 1,050 pixel resolution and 16:10 aspect ratio for process control systems that require high resolution and wide screen to display all their information. Resistive touch screen option is available for operation where protective clothing and gloves are necessary. Up to 4 Challenger terminals can be...
Read More »
Fieldbus Wiring Hubs allow live connection in hazardous areas.
Featuring screw-secured, pluggable connectors, F300 Series Megablock serves Zone 2 and Division 2 hazardous area applications where high-energy trunk can be powered by range of fieldbus power supplies. Live connection and disconnection of fieldbus spurs without gas clearance certificate is allowed with Ex ic and non-incendive field devices. Pluggable Trunk In/Out connector allows replacement of...
Read More »
Type 1 Surge Protection for Electrical AC Mains and Branches: Zonemaster PRO and Zonesentinel
HOUSTON- MTL's new ZoneMaster PRO Type 1 and ZoneSentinel Type 1 models allows users to install UL1449 3rd Edition listed premium surge protection before or after the main building disconnect. These models, listed at 20kA in level, can be installed in a UL96A certified lighting protection system. The versatility and flexibility of the ZoneMaster PRO Type 1 makes it well-suited for all types of...
Read More »
Surge Protectors safeguard LED lighting.
Rated for use in harsh environments, including outdoor mounting, serial Model LS10 and parallel Model LS12 protect LED lighting from transients and surges generated by lightning and switching transients. Units feature Metal Oxide Varistor technology as well as high energy discharge tube technology with failure disconnect network. Offering fully automatic operation, devices provide protection for...
Read More »Network Analyzer enables secure asset management.
Tofino(TM) Industrial Security Solution is offered with loadable security module, which discovers and identifies what devices are on network and creates firewall rules to control traffic flowing to them. Functionality is derived from analyzing network traffic and does not impose any risk to industrial process. Solution makes up-to-the-minute network map always available to control engineer and...
Read More »
Surge Protector eliminates threat of power crossover.
Self-healing SSP series, suited for general Process I/O applications and higher voltage signal applications for SCADA run over private wire networks,- eliminates surge protection device failures due to continuous overvoltage/over current conditions while adding current limiting protection to circuit. If communication lines are subjected to induced AC power or AC power-cross, SSP responds and...
Read More »HART Multiplexer features SIL3 rating.
Featuring channel to channel isolation, MTL4850 is suitable- for connection to instrument loops performing safety functions up to and including SIL3. Multiplexer ensures there is no effect on analog loops to which it is connected; multiple concurrent faults in components that couple unit to loops would have to be present before isolation would be compromised. Supporting HART Rev. 5-7 devices,...
Read More »
MTL Offers Gecma HMI System with 22 Widescreen Display
GeCma components GmbH, the HMI division of MTL Instruments, is pleased to announce the availability of a 22 wide screen option for its market leading Challenger range of remote HMI data terminals. GeCma is the recognized market leader for visualisation systems in hazardous areas as can be seen from its installed base of over 15000 units worldwide. Being based upon the range of HMI's of the same...
Read More »
Fieldbus Power Supply offers redundancy, online diagnostics.
Suited for general-purpose and hazardous area High Energy Trunk architectures, 9180 Series provides redundant power for 8 FOUNDATION(TM) fieldbus H1 segments via 2 groups of up to three 919x-FP 4-segment power modules operating in N+1 redundant configuration. Modularity accommodates redundant applications requiring 250-500 mA or up to 250 mA current per segment. Along with failure alarms and...
Read More »
HMI System handles latest process control systems.
Suited for use in hazardous areas, MTL GeCma Challenger 221 offers 22 in. color display with 1,680 x 1,050 pixel resolution and 16:10 aspect ratio for process control systems that require high resolution and wide screen to display all their information. Resistive touch screen option is available for operation where protective clothing and gloves are necessary. Up to 4 Challenger terminals can be...
Read More »
Fieldbus Wiring Hubs allow live connection in hazardous areas.
Featuring screw-secured, pluggable connectors, F300 Series Megablock serves Zone 2 and Division 2 hazardous area applications where high-energy trunk can be powered by range of fieldbus power supplies. Live connection and disconnection of fieldbus spurs without gas clearance certificate is allowed with Ex ic and non-incendive field devices. Pluggable Trunk In/Out connector allows replacement of...
Read More »
Type 1 Surge Protection for Electrical AC Mains and Branches: Zonemaster PRO and Zonesentinel
HOUSTON- MTL's new ZoneMaster PRO Type 1 and ZoneSentinel Type 1 models allows users to install UL1449 3rd Edition listed premium surge protection before or after the main building disconnect. These models, listed at 20kA in level, can be installed in a UL96A certified lighting protection system. The versatility and flexibility of the ZoneMaster PRO Type 1 makes it well-suited for all types of...
Read More »
Surge Protectors safeguard LED lighting.
Rated for use in harsh environments, including outdoor mounting, serial Model LS10 and parallel Model LS12 protect LED lighting from transients and surges generated by lightning and switching transients. Units feature Metal Oxide Varistor technology as well as high energy discharge tube technology with failure disconnect network. Offering fully automatic operation, devices provide protection for...
Read More »Network Analyzer enables secure asset management.
Tofino(TM) Industrial Security Solution is offered with loadable security module, which discovers and identifies what devices are on network and creates firewall rules to control traffic flowing to them. Functionality is derived from analyzing network traffic and does not impose any risk to industrial process. Solution makes up-to-the-minute network map always available to control engineer and...
Read More »