Kidde-Fenwal Inc.
Ashland, MA 01721
Share:
Ignition Control handles 2 burners as integrated system.
Developed for gas-fired applications utilizing 2 separate burners, Series 35-62 controls single gas valve and simultaneously lights and monitors both gas burners. Features include 24 Vac, microprocessor-based DSI control; system diagnostic LED; selectable number of tries for ignition; and pre-purge and inter-purge timings of 0, 15, or 30 sec. Direct spark gas ignition system also provides remote...
Read More »Gas Ignition Controls run on 24 or 120 Vac.
Intermittent Pilot models 35-73 and 36-63 are microprocessor-based and polarity insensitive. With repeatable timing sequences, they provide TFI times up to 120 sec, local and remote flame sense options, as well as thermostat/power off and automatic reset options. Fenwal 35-73, available in PCB only, case and cover, and potted configurations, is suited for controlling pilot and main gas valves,...
Read More »
Temperature Controller suits OEM applications.
Microprocessor-based, Series 59 uses large LEDs to display temperature and other parameters, which are programmed using 2 pushbuttons on face of device. Temperature is sensed by thermistor, RTD, thermocouple, or solid-state relay. Differential and set point offset values are fully adjustable, permitting application-specific programming. Controller accepts 24 Vac/Vdc or 120/208/240 Vac power...
Read More »
Gas Ignition Control runs on 120 Vac, 50/60 Hz.
Model 35-73 Intermittent Pilot Gas Ignition Control is microprocessor-based and polarity insensitive. Featuring repeatable timing sequences, it provides TFI times up to 120 sec, single spark and sense and remote flame sense options, thermostat/power off and automatic reset options, and on-board diagnostics with LED output. CSA certified unit is suitable for controlling pilot and main gas valves,...
Read More »
Gas Ignition Controls simplify HVAC applications.
Fully integrated controls feature PC board platforms that can be designed to perform discrete (heat only) or multiple (heating and cooling) functions. Offered as direct spark and hot surface ignition systems, controls use plug-in style connectors and can include outputs that drive other accessories. Hardware- and software-configurable controls are UL/CSA/CE approved.
Read More »
Gas/Temperature Controls are integrated into one device.
Custom Gas Ignition and Temperature Controls operate with RTD, thermocouple, and thermistor sensors and combine direct spark or hot surface ignition with precise temperature control. They can provide single- and multi-speed fan control, custom temperature and ignition algorithms, GUIs and displays, LED diagnostics, and communications interface. Packaging options include standoff mounting, potting...
Read More »
Surface Mount Thermostats have temperature range to 525-
Precision Surface Mount Snap Disc Thermostats utilize snap-acting bimetallic disc as actuating element. Devices have silver contacts and can be equipped with solder lugs, wiring eyelets, and quick-connect style terminations. Available with NC or NO switching, thermostats are UL/CSA and CE approved, and are offered in automatic and manual reset versions with contact ratings up to 25 A. Units meet...
Read More »
Gas Ignition Controls can continuously monitor functions.
Custom Gas Ignition Controls integrate previously discrete functions such as gas control and temperature sensing, with field-adjustable fan off delay into one unit with one central wiring point. Available with over 1,000 variations of spark electrodes and flame sense rods, controls are microprocessor-controlled and can provide ignition timing from a few seconds to several hours, with 0.2 sec...
Read More »
Ceramic Electrode Assemblies spark to ignite gas.
Custom configured for direct spark and hot-surface gas ignition, Electrode Assemblies incorporate flame-sensor rods and spark-ignition systems in variety of sizes. Custom fabricated to position spark gap precisely, they can use Steatite or alumina ceramics for applications up to 1,800Ã-
Read More »
Gas/Temperature Control Unit has +/- 1 deg F accuracy.
Series 35-85 microprocessor-based integrated gas and temperature control unit accurately monitors temperature and begins gas ignition sequence. It provides hot surface ignition, and offers combustion blower control relay. It allows multiple ignition tries with custom timings and temperature algorithms. Packaged on 1 PC board, 35-85 Series offers 24 or 120/240 Vac dual voltages with 120 Vac...
Read More »Ignition Control handles 2 burners as integrated system.
Developed for gas-fired applications utilizing 2 separate burners, Series 35-62 controls single gas valve and simultaneously lights and monitors both gas burners. Features include 24 Vac, microprocessor-based DSI control; system diagnostic LED; selectable number of tries for ignition; and pre-purge and inter-purge timings of 0, 15, or 30 sec. Direct spark gas ignition system also provides remote...
Read More »Gas Ignition Controls run on 24 or 120 Vac.
Intermittent Pilot models 35-73 and 36-63 are microprocessor-based and polarity insensitive. With repeatable timing sequences, they provide TFI times up to 120 sec, local and remote flame sense options, as well as thermostat/power off and automatic reset options. Fenwal 35-73, available in PCB only, case and cover, and potted configurations, is suited for controlling pilot and main gas valves,...
Read More »
Temperature Controller suits OEM applications.
Microprocessor-based, Series 59 uses large LEDs to display temperature and other parameters, which are programmed using 2 pushbuttons on face of device. Temperature is sensed by thermistor, RTD, thermocouple, or solid-state relay. Differential and set point offset values are fully adjustable, permitting application-specific programming. Controller accepts 24 Vac/Vdc or 120/208/240 Vac power...
Read More »
Gas Ignition Control runs on 120 Vac, 50/60 Hz.
Model 35-73 Intermittent Pilot Gas Ignition Control is microprocessor-based and polarity insensitive. Featuring repeatable timing sequences, it provides TFI times up to 120 sec, single spark and sense and remote flame sense options, thermostat/power off and automatic reset options, and on-board diagnostics with LED output. CSA certified unit is suitable for controlling pilot and main gas valves,...
Read More »
Gas Ignition Controls simplify HVAC applications.
Fully integrated controls feature PC board platforms that can be designed to perform discrete (heat only) or multiple (heating and cooling) functions. Offered as direct spark and hot surface ignition systems, controls use plug-in style connectors and can include outputs that drive other accessories. Hardware- and software-configurable controls are UL/CSA/CE approved.
Read More »
Gas/Temperature Controls are integrated into one device.
Custom Gas Ignition and Temperature Controls operate with RTD, thermocouple, and thermistor sensors and combine direct spark or hot surface ignition with precise temperature control. They can provide single- and multi-speed fan control, custom temperature and ignition algorithms, GUIs and displays, LED diagnostics, and communications interface. Packaging options include standoff mounting, potting...
Read More »
Surface Mount Thermostats have temperature range to 525-
Precision Surface Mount Snap Disc Thermostats utilize snap-acting bimetallic disc as actuating element. Devices have silver contacts and can be equipped with solder lugs, wiring eyelets, and quick-connect style terminations. Available with NC or NO switching, thermostats are UL/CSA and CE approved, and are offered in automatic and manual reset versions with contact ratings up to 25 A. Units meet...
Read More »
Gas Ignition Controls can continuously monitor functions.
Custom Gas Ignition Controls integrate previously discrete functions such as gas control and temperature sensing, with field-adjustable fan off delay into one unit with one central wiring point. Available with over 1,000 variations of spark electrodes and flame sense rods, controls are microprocessor-controlled and can provide ignition timing from a few seconds to several hours, with 0.2 sec...
Read More »
Ceramic Electrode Assemblies spark to ignite gas.
Custom configured for direct spark and hot-surface gas ignition, Electrode Assemblies incorporate flame-sensor rods and spark-ignition systems in variety of sizes. Custom fabricated to position spark gap precisely, they can use Steatite or alumina ceramics for applications up to 1,800Ã-
Read More »
Gas/Temperature Control Unit has +/- 1 deg F accuracy.
Series 35-85 microprocessor-based integrated gas and temperature control unit accurately monitors temperature and begins gas ignition sequence. It provides hot surface ignition, and offers combustion blower control relay. It allows multiple ignition tries with custom timings and temperature algorithms. Packaged on 1 PC board, 35-85 Series offers 24 or 120/240 Vac dual voltages with 120 Vac...
Read More »