NLB Corp.
Wixom, MI 48393
Water Jet Lance works at pressures from 10,000-24,000 psi.
Able to handle flows up to 35 gpm, NCG24-286 features quick-change cartridge valve that can be replaced in field. Trigger, operated with 8-12 lb of pressure, lets operator dump pressure immediately by pushing forward. It also incorporates one-finger latch that prevents accidental actuation. Product weighs 13.5 lb, and operator can adjust shoulder stock and hand grip for optimal comfort.
Read More »
Water Jet Head operates at 5,000-24,000 psi.
Stainless steel, SPIN-NOZZLEÃ-® Viper 24(TM) features cylindrical design that helps avoid bumps as it rotates on end of water jetting lance. Head is threaded to accept 2 nozzles, which are flush-mounted to minimize impact. Viper 24 rotates by reaction energy of high-pressure water it delivers, without any external driver, turning any standard lance into water jetting tool. Lances rated at...
Read More »
Water Jet Pump offers choice of 6 pressures at 425 hp.
Offering corrosion-resistant stainless steel construction, Series NLB 350D convertible water jet pump provides 350 or 425 hp with flow ranges from 27-74 gpm. Users can convert to any of 6 pressures to suit job: 8,000, 10,000, 13,000, 15,000, 17,000, or 20,000 psi. Diesel-driven unit is trailer-mounted for portability, and slow-running triplex plunger pump and hard-coated valves and plungers...
Read More »
Water Jet Pump converts to various operating pressures.
Series NLB 331 consists of plunger pump with hard-coated valves and plungers. Quick-change fluid end lets user choose any of 5 pressures from 8,000-20,000 psi. Flows range from 24-58 gpm. Utilizing 330 hp diesel engine, mobile pump unit is suited for range of product removal and surface preparation jobs.
Read More »
Water-Jet Pumps feature engines up to 425 hp.
Series NLB 350 are convertible units with quick-change fluid end that lets users operate at any of 5 pressures to meet various job requirements. Pressures range from 8,000-20,000 psi and flows range from 27-74 gpm. Series includes diesel and electric units in 350 and 425 hp. Pumps have hard-coated valves and plungers, and corrosion-resistant stainless steel parts to extend operating life.
Read More »
Water Jet Pump requires 20 min to convert fluid end.
Series 225 pump operates at pressures of 10,000, 12,000, 20,000, or 24,000 psi. Swing-out fluid end allows for access to change plungers and related components without requiring manifold or gauge change. Series can be ordered with 200, 230, or 275 hp diesel engine and produces flows from 10 to 38 gpm. Slow-running triplex design minimizes wear with hard-coated valves and plungers....
Read More »
Floor Cleaning Machine removes coatings and pavement stripes.
StripeJet(TM) removes thick or thin films at rates of 300 to 2,000 ftÃ-²/hr. Rotating water jets, rated up to 40,000 psi, are mounted to compact vehicle. Vacuum recovery keeps water and debris contained, and leaves floors dry. Water jetting process is also dust-free. Unit has 5 cleaning head options from 8 to 24 in. to suit various surfaces, coatings, and markings. Just 10 ft long, it...
Read More »
Foot Control Valve suits flows up to 80 gpm.
FC10-800 high-pressure water jet foot control valve is rated for pressures up to 10,000 psi. Pedal design includes latch to prevent accidental actuation, and allows operator to dump pressure almost instantly by rocking pedal forward. Dump ports on both sides help valve maintain stability when pressure is dumped. Disposable cartridge seal can be removed and replaced in less than 60 seconds.
Read More »
Water Jet Lance can dump pressure in 2 ways.
NCG10-286DT dual-trigger water jet lance has quick-change cartridge seal to allow users to rebuild lance in under 1 minute. Rated for pressures to 10,000 psi and flows to 25 gpm, lance requires pressure on both triggers to actuate flow of water. Operator can immediately dump pressure by releasing either trigger or by pushing the trigger forward. It requires 8 to 12 pounds of trigger pressure, and...
Read More »
Water Jet Lance has foot control.
NCG10-286 lance and FC10-286 foot control are rated for pressures up to 10,000 psi and flows up to 25 gpm. Unit is suitable for water jet surface preparation, paint removal, tank cleaning, concrete hydrodemolition, and concrete and pipe cutting. Both have quick-change cartridge seal. Lance has trigger that allows operator to immediately dump pressure by pushing the trigger forward. Foot control...
Read More »