Micro Plastics, Inc.

Spring Washers dampen vibration and provide accurate spacing.
Fasteners & Hardware

Spring Washers dampen vibration and provide accurate spacing.

Suited for use in rotating assemblies, as well as underwater applications, Spring Washers are molded in light-weight acetal material that has spring properties and also offers electrical and thermal insulation and corrosion resistance. They can be used singly in parallel, in series, or in series parallel for wide range of deflection and load capacity. Washers are available in 7 different sizes to...

Read More »
Specialized Nylon Washers lock and seal metal fasteners .
Fasteners & Hardware

Specialized Nylon Washers lock and seal metal fasteners .

Molded in corrosion-resistant Nylon 6/6, sealing and retaining ring washers are used to lock and seal metal fasteners using cold flow principle. Torque nut causes washer ID to flow into screw or bolt threads, and washer OD will flow outward to completely surround nut base and engage hex points. With design that facilitates assembly, specialized sealing washers fit standard screw sizes No. 4, 6,...

Read More »
DIN Rail Clip helps route wire and cables.
Fasteners & Hardware

DIN Rail Clip helps route wire and cables.

Accommodating up to 4 wire handling accessory fasteners which mount into 3/16 in. dia holes on clip, Din Rail Clip snaps onto DIN rail and is easily removable to allow reconfiguration of wiring. It can be used in conjunction with wide variety of wire/ cable clips that can mount in 3/16 dia hole and 1/16 in. panel. Clip is molded of nylon 6/6 which offers electrical insulation and is UL rated...

Read More »
PVC Threaded Rod is available in 13 thread sizes.
Architectural & Civil Engineering Products

PVC Threaded Rod is available in 13 thread sizes.

Offered in standard lengths of 2, 4, 6, and 8 ft, PVC Threaded Rod is amorphous thermoplastic with chemical resistance and dielectric properties. It offers tensile, flexural, and mechanical strength, low moisture absorption, dimensional stability, and flammability characteristics. Special lengths can be cut to meet custom application requirements, while 13 standard thread sizes are available from...

Read More »
Corrugated Tubing is offered in various material choices.
Fluid & Gas Flow Equipment

Corrugated Tubing is offered in various material choices.

Available in flame-retardant polypropylene, nylon 6, and polyethylene materials, Split Loom is offered in 1/4, 3/8, 1/2, 5/8, 3/4, and 1 in. dia sizes and supplied in variety of packaging options, including rolls, payout boxes, and mini and full size gaylord boxes. Flexible corrugated tube has opening seam down side for simplified wire insertion and removal. Extruded from durable black materials,...

Read More »
Hex Head Shoulder Screws
Fasteners & Hardware

Hex Head Shoulder Screws

Tuesday, February 10, 2009 Micro Plastics, Inc., Flippin, Arkansas, to meet the demands of industry, is introducing a complete new line of over 40 sizes of molded Nylon 6/6 Shoulder Screws. These socket head shoulder screws are offered in 10-24, Â-¼-20, 5/18-18 and 3/8-16 threads, in lengths of .345 to .625 . Shoulder lengths range from Â-¼ to 2 . The nylon properties of the shoulder...

Read More »
Architectural & Civil Engineering Products

Split Loom

Micro Plastics' recent plant expansion coupled with new state of the art manufacturing equipment have reduced production costs, resulting in new, lower, more competitive pricing on our Split Loom. A split wire loom is a flexible corrugated tube with an easy opening seam down the side for quick wire insertion and removal. The wire loom is extruded from durable black UL94V22 polypropylene,...

Read More »
Plastic Fasteners feature snap-in clip design.
Fasteners & Hardware

Plastic Fasteners feature snap-in clip design.

Available in 50 standard and 20 metric sizes with 8 item clips, X-MAS Tree Type Fasteners are molded in corrosion, abrasion, and vibration resistant black nylon with ribbed shank to facilitate installation. Clips hold secure in wide range of materials and work in blind hole applications. Standard line fits hole sizes of 1/8-3/8 in. and accommodates panel thicknesses from .062-2.00 in., while...

Read More »
Company News

New Product Catalog

Today we unveil our latest product catalog, containing thousands of fastening solutions for engineers and product designers. In addition to hundreds of new problem-solving products, our catalog features several new complete product lines with improved product and material explanations. Following stringent quality standards, we manufacture 10 million fasteners daily, offer over 30,000 items and...

Read More »
Company News

Micro Plastics, Inc. Introduces a New Product Catalog #39, Which Details Their Extensive Inventory of Plastic Fasteners. with 290 Pages, This Catalog Contains Thousands of Fastener Items.

This years' publication features 12 new product lines with over 500 NEW items added. Contents include: standard and metric machine screws, cap screws, nuts, washers, spacers, insulators, grommets, bushings, rivets, hole plugs, clamps, printed circuit board accessories, suspended ceiling hooks, wire routing kits and many other hardware items. Micro Plastics' manufactures millions upon millions of...

Read More »
Spring Washers dampen vibration and provide accurate spacing.
Fasteners & Hardware

Spring Washers dampen vibration and provide accurate spacing.

Suited for use in rotating assemblies, as well as underwater applications, Spring Washers are molded in light-weight acetal material that has spring properties and also offers electrical and thermal insulation and corrosion resistance. They can be used singly in parallel, in series, or in series parallel for wide range of deflection and load capacity. Washers are available in 7 different sizes to...

Read More »
Specialized Nylon Washers lock and seal metal fasteners .
Fasteners & Hardware

Specialized Nylon Washers lock and seal metal fasteners .

Molded in corrosion-resistant Nylon 6/6, sealing and retaining ring washers are used to lock and seal metal fasteners using cold flow principle. Torque nut causes washer ID to flow into screw or bolt threads, and washer OD will flow outward to completely surround nut base and engage hex points. With design that facilitates assembly, specialized sealing washers fit standard screw sizes No. 4, 6,...

Read More »
DIN Rail Clip helps route wire and cables.
Fasteners & Hardware

DIN Rail Clip helps route wire and cables.

Accommodating up to 4 wire handling accessory fasteners which mount into 3/16 in. dia holes on clip, Din Rail Clip snaps onto DIN rail and is easily removable to allow reconfiguration of wiring. It can be used in conjunction with wide variety of wire/ cable clips that can mount in 3/16 dia hole and 1/16 in. panel. Clip is molded of nylon 6/6 which offers electrical insulation and is UL rated...

Read More »
PVC Threaded Rod is available in 13 thread sizes.
Architectural & Civil Engineering Products

PVC Threaded Rod is available in 13 thread sizes.

Offered in standard lengths of 2, 4, 6, and 8 ft, PVC Threaded Rod is amorphous thermoplastic with chemical resistance and dielectric properties. It offers tensile, flexural, and mechanical strength, low moisture absorption, dimensional stability, and flammability characteristics. Special lengths can be cut to meet custom application requirements, while 13 standard thread sizes are available from...

Read More »
Corrugated Tubing is offered in various material choices.
Fluid & Gas Flow Equipment

Corrugated Tubing is offered in various material choices.

Available in flame-retardant polypropylene, nylon 6, and polyethylene materials, Split Loom is offered in 1/4, 3/8, 1/2, 5/8, 3/4, and 1 in. dia sizes and supplied in variety of packaging options, including rolls, payout boxes, and mini and full size gaylord boxes. Flexible corrugated tube has opening seam down side for simplified wire insertion and removal. Extruded from durable black materials,...

Read More »
Hex Head Shoulder Screws
Fasteners & Hardware

Hex Head Shoulder Screws

Tuesday, February 10, 2009 Micro Plastics, Inc., Flippin, Arkansas, to meet the demands of industry, is introducing a complete new line of over 40 sizes of molded Nylon 6/6 Shoulder Screws. These socket head shoulder screws are offered in 10-24, Â-¼-20, 5/18-18 and 3/8-16 threads, in lengths of .345 to .625 . Shoulder lengths range from Â-¼ to 2 . The nylon properties of the shoulder...

Read More »
Architectural & Civil Engineering Products

Split Loom

Micro Plastics' recent plant expansion coupled with new state of the art manufacturing equipment have reduced production costs, resulting in new, lower, more competitive pricing on our Split Loom. A split wire loom is a flexible corrugated tube with an easy opening seam down the side for quick wire insertion and removal. The wire loom is extruded from durable black UL94V22 polypropylene,...

Read More »

All Topics