Cat Pumps
Minneapolis, MN 55449
10,000 PSI Pressure Regulator
This high pressure industrial pressure regulator features a flow through design for easy, compact installation. This Stainless Steel pressure regulating valve sets system pressure and protects the pump from over pressure in high pressure pump systems up to 10,000 PSI. The 7710-7720 pressure regulators proportionally by-pass unused flow while maintaining full system pressure. The Model 7710 has MP...
Read More »
Pulse Pump suits high pressure chemical applications.
Permitting chemical application at system pressures up to 3,000 psi, Model 6350 Pulse Pump directly mounts onto pump head in center inlet valve port of user's high-pressure pump. Inlet line to the unit contains prime bulb to start chemical draw into it. Chemical exits through high-pressure line and is delivered into high-pressure discharge line of primary pump after pressure unloader valve. Pump...
Read More »
Pumps handle high-temperature and low-lubricity liquids.
Available with 316 SS cast head, 35 Frame Flushed Pumps feature porting in inlet manifold that permits external flush between low pressure and high pressure seals, which provides cooling and added lubrication. Pumps include concentric, high-density, solid ceramic plungers, as well as chrome-moly forged crankshaft and high-strength connecting rods. Model 3521C pumps 23 gpm at 2,000 psi, 3531C...
Read More »DI Water Flushed Pumps are for gas turbine inlet cooling.
Gas Turbine Inlet Cooling deionized water pumps have ported inlet manifold that permits external flushing between low and high pressure seals. Block-style K models feature forged 316 SSL head that provides close grain structure and fatigue resistance against aggressive DI water, while C models are available with 316 SS cast head. All models include chrome-moly forged crankshaft, high-strength...
Read More »Direct Drive Pumps deliver 4,000 psi.
Featuring modular unloader with built-in by-pass system and fixed chemical injector, Series 66DX is designed for direct-drive gas pressure washers and can also serve as jetting pump. Units include 8-bolt forged brass manifold head, oversized connecting rods, concentric solid ceramic plungers, and forged hardened crankshaft. Snap-together, interchangeable 304 SS inlet and discharge valve...
Read More »Plunger Pumps offer corrosion resistance.
Available in 4 models with flows to 320 gpm and pressures to 2,700 psi, reciprocating triplex R-Series Pumps are designed for reverse osmosis desalination and process applications. They feature duplex stainless steel heads, V-packing design, and concentric solid ceramic plungers. Self-lubricating chevron packings require no packing adjustment. Made of SG cast-iron, crankcase offers vibration...
Read More »High Pressure Pump suits sewer and pipe cleaning.
Delivering 20 gpm at 4,000 psi or 25 gpm at 3,000 psi, portable Model 3560 features concentric solid ceramic plunger and heavy-duty block-style discharge head. Heat-treated, roller burnished stepped seat valve assures positive seating, while 4-bolt valve plugs with O-ring and backup-ring offer added strength under pressure. Pump is suited for wet blasting, surface prep, hydrostatic pressure...
Read More »
Plunger Pump suits continuous-duty applications.
With 18 gpm, 1,200 psi rating, 15 Frame Model 1540 is suited for stationary installations as well as cart, truck, and trailer mounts. It incorporates TNM connecting rods; stainless steel plunger rods; heavy-duty, 10-bolt, split manifold; and Hi-Pressure Seals. Unit is also available as custom-designed Power Unit with heavy-duty, 3/8 in. steel base, Ã-¼ in. channel steel bracing, power supply...
Read More »
Plunger Pumps handle flow rates from 3.5-4.0 GPM.
Direct-drive 66DX models offer eight-bolt forged brass manifold heads; oversized, high-strength connecting rods; concentric, solid ceramic plungers; and forged, hardened crankshafts. Products deliver 4,000 psi and include Hi-Pressure Seals, V-Packings reinforced with male adapters, modular pressure regulating unloader with built-in bypass and fixed chemical injector, and snap-together,...
Read More »
Pumps have stainless steel construction.
Series K includes submersible pumps that handle semi-dirty liquids and liquids with suspended solids, and end-suction centrifugal pumps for high-flow, low-pressure booster, spraying, and transfer applications. Bulge-formed, stainless steel components offer uniform thickness with no sharp angles or weak stress points. Applications include booster pumps, soft spray and washing, beverage processing,...
Read More »
10,000 PSI Pressure Regulator
This high pressure industrial pressure regulator features a flow through design for easy, compact installation. This Stainless Steel pressure regulating valve sets system pressure and protects the pump from over pressure in high pressure pump systems up to 10,000 PSI. The 7710-7720 pressure regulators proportionally by-pass unused flow while maintaining full system pressure. The Model 7710 has MP...
Read More »
Pulse Pump suits high pressure chemical applications.
Permitting chemical application at system pressures up to 3,000 psi, Model 6350 Pulse Pump directly mounts onto pump head in center inlet valve port of user's high-pressure pump. Inlet line to the unit contains prime bulb to start chemical draw into it. Chemical exits through high-pressure line and is delivered into high-pressure discharge line of primary pump after pressure unloader valve. Pump...
Read More »
Pumps handle high-temperature and low-lubricity liquids.
Available with 316 SS cast head, 35 Frame Flushed Pumps feature porting in inlet manifold that permits external flush between low pressure and high pressure seals, which provides cooling and added lubrication. Pumps include concentric, high-density, solid ceramic plungers, as well as chrome-moly forged crankshaft and high-strength connecting rods. Model 3521C pumps 23 gpm at 2,000 psi, 3531C...
Read More »DI Water Flushed Pumps are for gas turbine inlet cooling.
Gas Turbine Inlet Cooling deionized water pumps have ported inlet manifold that permits external flushing between low and high pressure seals. Block-style K models feature forged 316 SSL head that provides close grain structure and fatigue resistance against aggressive DI water, while C models are available with 316 SS cast head. All models include chrome-moly forged crankshaft, high-strength...
Read More »CAT PUMPS Catalogs for Pumps and Accessories
Guides to Reciprocating Positive Displacement Triplex Piston and Plunger Pumps and coordinating System Protection and Monitoring Accessories Finding the right high-pressure pump is easy with the new Pump Catalog from CAT PUMPS. This new Pump Catalog has a user friendly and informative format that guides you through the process of selecting the right triplex high-pressure piston or plunger pump...
Read More »CAT PUMPS New Pump Catalog
Guide to Reciprocating Positive Displacement Triplex Piston and Plunger Pumps ____________________________________________________________________________ Finding the right high-pressure pump is easy with the new Pump Catalog from CAT PUMPS. This new Pump Catalogs' user friendly and informative format guides you through the process of selecting the right triplex high-pressure piston or plunger...
Read More »Direct Drive Pumps deliver 4,000 psi.
Featuring modular unloader with built-in by-pass system and fixed chemical injector, Series 66DX is designed for direct-drive gas pressure washers and can also serve as jetting pump. Units include 8-bolt forged brass manifold head, oversized connecting rods, concentric solid ceramic plungers, and forged hardened crankshaft. Snap-together, interchangeable 304 SS inlet and discharge valve...
Read More »Plunger Pumps offer corrosion resistance.
Available in 4 models with flows to 320 gpm and pressures to 2,700 psi, reciprocating triplex R-Series Pumps are designed for reverse osmosis desalination and process applications. They feature duplex stainless steel heads, V-packing design, and concentric solid ceramic plungers. Self-lubricating chevron packings require no packing adjustment. Made of SG cast-iron, crankcase offers vibration...
Read More »High Pressure Pump suits sewer and pipe cleaning.
Delivering 20 gpm at 4,000 psi or 25 gpm at 3,000 psi, portable Model 3560 features concentric solid ceramic plunger and heavy-duty block-style discharge head. Heat-treated, roller burnished stepped seat valve assures positive seating, while 4-bolt valve plugs with O-ring and backup-ring offer added strength under pressure. Pump is suited for wet blasting, surface prep, hydrostatic pressure...
Read More »
Plunger Pump suits continuous-duty applications.
With 18 gpm, 1,200 psi rating, 15 Frame Model 1540 is suited for stationary installations as well as cart, truck, and trailer mounts. It incorporates TNM connecting rods; stainless steel plunger rods; heavy-duty, 10-bolt, split manifold; and Hi-Pressure Seals. Unit is also available as custom-designed Power Unit with heavy-duty, 3/8 in. steel base, Ã-¼ in. channel steel bracing, power supply...
Read More »