Laurel Electronics, Inc.
Costa Mesa, CA 92626
Programmable DC Panel Meter takes up to 60 readings/second.
Providing 0.01% FS accuracy, Laureate DC Digital Voltmeter/Ammeter is suited for peak capture, alarm, control, and real-time computer interface. Used as direct-reading voltmeter, unit provides 5 full-scale voltage ranges from 200 mV with 10 Ã-µV resolution to 600 V with 100 mV resolution. Used as ammeter, it provides 4 full-scale, direct-acting current ranges from 2 mA with 0.1 mA resolution...
Read More »Linear Displacement Meter works in ratiometric mode.
Laureate Model SG is designed for transducers whose output is of changing resistance, as provided by sliding contact voltage divider. Changing resistance signal is converted to engineering units such as position, level, or percentage, and display is user-scalable to 5 digits. Along with 3 scaling methods, unit offers built-in, isolated excitation supply with selectable 5, 10, and 24 Vdc outputs....
Read More »
Transmitter tracks up/down pulse totals.
Housed in 35 mm DIN rail case, Laureate Model TA-FRT is powered by 95-240 Vac Ã-
Read More »
Scale Meter takes up to 60 weight readings/sec.
Laureate Model LW UL-listed meter features weighing firmware that includes manual tare or auto-tare, selectable count by function of 1, 2, 5, 10, 20, or 50 to round off display, and selectable setpoint offset. Device operates in 4- or 6-wire hookup, and includes built-in isolated 10 Vdc, 120 mA excitation supply and can power up to 4 x 350W load cells in parallel. Dummy right-hand zero is...
Read More »
Wall-Mount Enclosure accommodates 1/8 DIN instruments.
Offering environmental protection to NEMA-4X, Model BOX wall- or bulkhead-mount enclosure comes with 1/8 DIN panel cutout for use with 1/8 DIN instruments with 5.30 in. max depth. Compartment that houses instrument is hermetically sealed, and mounting holes are located on rear surface, outside of sealed compartment. Wire feedthroughs are via 3 sealed cable glands, which accept up to 0.24 in. dia...
Read More »
Linearizing Option offered for panel meters and counters.
Custom Curve Linearization option for Laureate digital panel meters and counters is implemented in form of 20 nonlinear spline-fit segments. Typical error will be 0.1-0.01% of full scale, depending on number of data points used for setup, error in data points, and severity of nonlinearities or discontinuities. Setup is accomplished using external PC, RS232 cable, and linearizing software, with...
Read More »
Strain Gauge Meter captures peaks at 60 readings/sec.
Laureate Model SG enables peak value of reading to be automatically captured for display on meter or transmittal to computer as serial data. Suited for testing applications that look for breaking point of materials or structures, UL-listed digital panel meter for strain gauges offers 3 selectable scaling methods and accuracy of 0.01% FS, Ã-
Read More »Data Logging Software displays/collects info from meters.
Data Logging Software turns PC connected to up to 32 digital panel meters, counters, timers, or DIN rail transmitters into data logging system with distributed displays. Up to 64 Virtual meters on computer screen show readings and alarm indications of actual meters/transmitters or mathematical combinations of readings. Data can be saved in ASCII file and imported into MS Excel for graphing and...
Read More »Modbus Protocol can be implemented in multiple instruments.
Implemented by microcomputer on main board, Modbus Serial Line protocol is available for company's line of 1/8 DIN LaureateÃ-® digital panel meters, counters, timers, 6-digit remote displays, and DIN rail transmitters. It is selectable as menu option during device setup and allows multiple Laureate and non-Laureate devices to be addressed on same RS485 line. This master-slave protocol...
Read More »
Transmitter converts serial data to analog output.
Laureate Model TS DIN rail transmitter accepts RS-232 or RS-485 serial data, at rates from 300-19,200 bps, and converts it to isolated, scalable, 4-20 mA, 0-20 mA, or 0-10 V analog output signal. Modbus protocol allows multiple devices to be addressed on same RS485 data line, and Custom ASCII protocol enables retrieval of selected data from long character strings. Two isolated solid state relays,...
Read More »Programmable DC Panel Meter takes up to 60 readings/second.
Providing 0.01% FS accuracy, Laureate DC Digital Voltmeter/Ammeter is suited for peak capture, alarm, control, and real-time computer interface. Used as direct-reading voltmeter, unit provides 5 full-scale voltage ranges from 200 mV with 10 Ã-µV resolution to 600 V with 100 mV resolution. Used as ammeter, it provides 4 full-scale, direct-acting current ranges from 2 mA with 0.1 mA resolution...
Read More »Linear Displacement Meter works in ratiometric mode.
Laureate Model SG is designed for transducers whose output is of changing resistance, as provided by sliding contact voltage divider. Changing resistance signal is converted to engineering units such as position, level, or percentage, and display is user-scalable to 5 digits. Along with 3 scaling methods, unit offers built-in, isolated excitation supply with selectable 5, 10, and 24 Vdc outputs....
Read More »
Transmitter tracks up/down pulse totals.
Housed in 35 mm DIN rail case, Laureate Model TA-FRT is powered by 95-240 Vac Ã-
Read More »
Scale Meter takes up to 60 weight readings/sec.
Laureate Model LW UL-listed meter features weighing firmware that includes manual tare or auto-tare, selectable count by function of 1, 2, 5, 10, 20, or 50 to round off display, and selectable setpoint offset. Device operates in 4- or 6-wire hookup, and includes built-in isolated 10 Vdc, 120 mA excitation supply and can power up to 4 x 350W load cells in parallel. Dummy right-hand zero is...
Read More »
Wall-Mount Enclosure accommodates 1/8 DIN instruments.
Offering environmental protection to NEMA-4X, Model BOX wall- or bulkhead-mount enclosure comes with 1/8 DIN panel cutout for use with 1/8 DIN instruments with 5.30 in. max depth. Compartment that houses instrument is hermetically sealed, and mounting holes are located on rear surface, outside of sealed compartment. Wire feedthroughs are via 3 sealed cable glands, which accept up to 0.24 in. dia...
Read More »
Linearizing Option offered for panel meters and counters.
Custom Curve Linearization option for Laureate digital panel meters and counters is implemented in form of 20 nonlinear spline-fit segments. Typical error will be 0.1-0.01% of full scale, depending on number of data points used for setup, error in data points, and severity of nonlinearities or discontinuities. Setup is accomplished using external PC, RS232 cable, and linearizing software, with...
Read More »
Strain Gauge Meter captures peaks at 60 readings/sec.
Laureate Model SG enables peak value of reading to be automatically captured for display on meter or transmittal to computer as serial data. Suited for testing applications that look for breaking point of materials or structures, UL-listed digital panel meter for strain gauges offers 3 selectable scaling methods and accuracy of 0.01% FS, Ã-
Read More »Data Logging Software displays/collects info from meters.
Data Logging Software turns PC connected to up to 32 digital panel meters, counters, timers, or DIN rail transmitters into data logging system with distributed displays. Up to 64 Virtual meters on computer screen show readings and alarm indications of actual meters/transmitters or mathematical combinations of readings. Data can be saved in ASCII file and imported into MS Excel for graphing and...
Read More »Modbus Protocol can be implemented in multiple instruments.
Implemented by microcomputer on main board, Modbus Serial Line protocol is available for company's line of 1/8 DIN LaureateÃ-® digital panel meters, counters, timers, 6-digit remote displays, and DIN rail transmitters. It is selectable as menu option during device setup and allows multiple Laureate and non-Laureate devices to be addressed on same RS485 line. This master-slave protocol...
Read More »
Transmitter converts serial data to analog output.
Laureate Model TS DIN rail transmitter accepts RS-232 or RS-485 serial data, at rates from 300-19,200 bps, and converts it to isolated, scalable, 4-20 mA, 0-20 mA, or 0-10 V analog output signal. Modbus protocol allows multiple devices to be addressed on same RS485 data line, and Custom ASCII protocol enables retrieval of selected data from long character strings. Two isolated solid state relays,...
Read More »