JVL USA/Motion Control Sales Ltd.
Morrow, OH 45152-9444
Share:
New MAC1500 AC Servo Motor Comes with Built-In Controller
Offers Nano-PLC, direct AC mains supply and can withstand the rigorous demands required. Available with length of 182 mm. with torque of 4.78/14.3 Nm at 3000rpm. Requires connection of the main voltage of 3x400VAC through the M23 connectors.
Read More »
New MAC Motor from JVL Eliminates the Need for Separate Servo Driver or Controller
The MAC® Motor with 3000 W rating is combined with high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC. The motor come in 311.8 mm length and deliver torque of 9.55/28.6 Nm at 3000 rpm. The motor is supplied with power via 3x400 VAC M23 connectors and is offered with Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen and Profinet...
Read More »
NEMA23 Stepper Motors suits automation/motion control systems.
Along with- NEMA 23 flange dimensions of 57 x 57 mm, MIS23 series has rated torques of 1.1, 1.6, and- 2.5 Nm (1,000- rpm @ 48 Vdc). Protecting against electrical noise, control and communication functions are integrated with motor in- IP42, IP55, or IP65 housing. Different PCBs can be mounted within housing, and standard features include pulse/direction driver, serial RS485 position...
Read More »
Integrated Servo Motor features stainless steel construction.
Constructed with stainless steel shaft, flange, tube, and rear end cover, MAC 141 has Teflon-® sealing for watertight operation. IP67-rated unit integrates electronics, encoder, driver, and controller. Available with built-in planetary gear box in ratios from 3:1 to 216:1, brushless servo motor delivers 0.48/1.59 Nm RMS/peak, 134 W, and up to 2,700 rpm. Option for built-in PLC, RS232/485,...
Read More »
Integrated Servo Motors use Profinet module.
Available for complete JVL range of integrated servo motors, JVL Profinet Module is equipped with 2 Ethernet connectors and built-in switch, enabling line topology without extra hardware. Several LEDs enable technicians and operators to get quick status overview, while opto-isolated digital I/Os embedded in module allow control of extra sensors without external I/O modules. All connectors are...
Read More »
EtherCAT Module supports 400-3,000 W integrated servo motors.
Equipped with M12 connectors and internal switch technology with Ethernet IN/OUT, EtherCAT Industrial Ethernet Module enables high-speed real-time Ethernet communication directly to drives. Unit features 100 Mbps communication speed and minimum cycle time of 260 -µS. Update time for 1,000 distributed I/O's is 30 -µs, and up to 1,486 bytes of process data can be exchanged with single Ethernet...
Read More »
NEMA34 Stepper Motors come in 95-156 mm long packages.
Featuring RS485 and CANopen serial interface as well as programmable motion controller, MIS340/1/2 motors contains everything needed to solve control task as stand-alone unit or controlled via PLC/PC. Resolution of 819,200 step/revolution promotes smooth and silent running, and 8 I/O points can be configured to be digital input/output or analog input. Velocity and acceleration ratings are 0.01...
Read More »
OCX Driver facilitates programming of motors and controllers.
Designed for JVL MAC050-141, MAC800, and QuickStep motors and SMC75 Controller, OCX-Driver supports programming in LabView, Excel, Visual Basic, Visual C++, Visual.Net, Delphi, and Borland C++ Builder. Program enables users to read and write register values to and from motors and controller, and addresses special MAC protocol with checksum, inverse byte, register length, and register format.
Read More »JVL Offers Geared Motors for Any Application
Easy connection of JVL integrated motors to a wide range of gear boxes - worm, low cost planetary, high performance planetary and backlash free robot gear reducers JVL is a world leader in integrated servo- and stepper motors. Their integrated motors are the most compact and versatile on the market today, offering connection to a wide range of bus systems such as CANopen, Devicenet and Profibus...
Read More »
Wireless Interface Module is designed for motor control.
Providing option to run mesh networks with ZigBee protocol on top of IEEE 802.15.4 radio technology, MAC00-FZ4 interface module offers capability to address large number of motors from one master computer. Module can be used with all JVL integrated servo motors MAC050-140, MAC400, and MAC800 from 50-750 W.
Read More »
New MAC1500 AC Servo Motor Comes with Built-In Controller
Offers Nano-PLC, direct AC mains supply and can withstand the rigorous demands required. Available with length of 182 mm. with torque of 4.78/14.3 Nm at 3000rpm. Requires connection of the main voltage of 3x400VAC through the M23 connectors.
Read More »Fast and Easy Setup for Rockwell Automation/Allen-Bradley PLC
Birkerød, Denmark – After the successful introduction of the complete range of ServoStep integrated motors JVL is now releasing Add-On-Instructions for fast and easy setup and programming in Rockwell Automation’s Studio 5000 software. All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and Ethernet Switch as well as TÜV-approved STO option. The integrated design...
Read More »
New MAC Motor from JVL Eliminates the Need for Separate Servo Driver or Controller
The MAC® Motor with 3000 W rating is combined with high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC. The motor come in 311.8 mm length and deliver torque of 9.55/28.6 Nm at 3000 rpm. The motor is supplied with power via 3x400 VAC M23 connectors and is offered with Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen and Profinet...
Read More »
NEMA23 Stepper Motors suits automation/motion control systems.
Along with- NEMA 23 flange dimensions of 57 x 57 mm, MIS23 series has rated torques of 1.1, 1.6, and- 2.5 Nm (1,000- rpm @ 48 Vdc). Protecting against electrical noise, control and communication functions are integrated with motor in- IP42, IP55, or IP65 housing. Different PCBs can be mounted within housing, and standard features include pulse/direction driver, serial RS485 position...
Read More »
Integrated Servo Motor features stainless steel construction.
Constructed with stainless steel shaft, flange, tube, and rear end cover, MAC 141 has Teflon-® sealing for watertight operation. IP67-rated unit integrates electronics, encoder, driver, and controller. Available with built-in planetary gear box in ratios from 3:1 to 216:1, brushless servo motor delivers 0.48/1.59 Nm RMS/peak, 134 W, and up to 2,700 rpm. Option for built-in PLC, RS232/485,...
Read More »
Integrated Servo Motors use Profinet module.
Available for complete JVL range of integrated servo motors, JVL Profinet Module is equipped with 2 Ethernet connectors and built-in switch, enabling line topology without extra hardware. Several LEDs enable technicians and operators to get quick status overview, while opto-isolated digital I/Os embedded in module allow control of extra sensors without external I/O modules. All connectors are...
Read More »
EtherCAT Module supports 400-3,000 W integrated servo motors.
Equipped with M12 connectors and internal switch technology with Ethernet IN/OUT, EtherCAT Industrial Ethernet Module enables high-speed real-time Ethernet communication directly to drives. Unit features 100 Mbps communication speed and minimum cycle time of 260 -µS. Update time for 1,000 distributed I/O's is 30 -µs, and up to 1,486 bytes of process data can be exchanged with single Ethernet...
Read More »
NEMA34 Stepper Motors come in 95-156 mm long packages.
Featuring RS485 and CANopen serial interface as well as programmable motion controller, MIS340/1/2 motors contains everything needed to solve control task as stand-alone unit or controlled via PLC/PC. Resolution of 819,200 step/revolution promotes smooth and silent running, and 8 I/O points can be configured to be digital input/output or analog input. Velocity and acceleration ratings are 0.01...
Read More »
OCX Driver facilitates programming of motors and controllers.
Designed for JVL MAC050-141, MAC800, and QuickStep motors and SMC75 Controller, OCX-Driver supports programming in LabView, Excel, Visual Basic, Visual C++, Visual.Net, Delphi, and Borland C++ Builder. Program enables users to read and write register values to and from motors and controller, and addresses special MAC protocol with checksum, inverse byte, register length, and register format.
Read More »JVL Offers Geared Motors for Any Application
Easy connection of JVL integrated motors to a wide range of gear boxes - worm, low cost planetary, high performance planetary and backlash free robot gear reducers JVL is a world leader in integrated servo- and stepper motors. Their integrated motors are the most compact and versatile on the market today, offering connection to a wide range of bus systems such as CANopen, Devicenet and Profibus...
Read More »