Sherwin-Williams Co. c/o Ultimate Lead Systems
Berea, OH 44017
Share:
Software aids in maintenance painting analyses.
Site Survey(TM) provides long-term budgetary analyses of on-site plant survey data to improve maintenance painting planning. Run on Microsoft Office platform, standalone program lets users enter data to catalog and evaluate plant assets, estimate current and future maintenance painting expenses, and generate cost comparisons for various budget scenarios. Created reports identify maintenance...
Read More »
Enamel Coating dries to touch in 15 minutes.
Suited for interior or exterior use, KEM 4000 High Solids Acrylic Alkyd Enamel provides high gloss and is VOC-compliant. For light service environments, product may be applied directly to steel without primer. Coating is ready to use with no mixing of additional components, and can be tinted to broad range of colors. KEM 4000 is suited for general metal applications including steel decking,...
Read More »
Water-Based Urethane Coating resists yellowing.
HYDROGLOSS(TM) Single-Component Urethane Coating is formulated to provide high-gloss finish with interior and exterior color and gloss retention. It is ready to brush, roll, or spray without adding and mixing additional components. With VOC content of 250 g/l, low odor formulation is recommended for water tanks, power plants, amusement parks, bridge and highway construction, and for corporate...
Read More »
Zinc-Epoxy Coating System meets Class B requirements.
Coating system consists of Steel Spec(TM) epoxy primer and Zinc Clad-® II Plus inorganic zinc rich coating and meets slip coefficient performance standards for bolted connections per ASTM and AISC specifications. Zinc Clad II Plus is solvent-based, 3-component, inorganic ethyl silicate coating that dries to handle in 20 minutes at 77-°F. Corrosion-resistant Steel-Spec topcoat can be applied at...
Read More »
Epoxy Coating is moisture tolerant.
Dura-PlateÃ-® MT Epoxy, low-VOC, 2-component, bisphenol A, epoxy-amine coating, adheres directly to damp or dry metal surfaces. Low-odor coating can be applied without regard to dew point. It provides performance comparable to MIL-P-23236C, Type VII, Class 15b and 17. Epoxy is suitable for ships, including bilge areas, and other offshore and marine structures as well as oil and fuel storage...
Read More »
Epoxy Siloxane applies in one coat.
Dual-component Polysiloxane XLE combines properties of epoxy and polyurethane in one coat. Glossy, self-priming coating is VOC-compliant and isocyanate-free and dries in 1 hr to corrosion-resistant finish. Suited for application by brush, roller, and conventional or airless spray equipment, product may be applied directly to properly prepared steel or over inorganic, zinc-rich primers. It is...
Read More »
Marking Paint provides fade resistance.
KrylonÃ-® Industrial Quik-Mark(TM) Solvent-Based, Fluorescent Orange, Inverted Marking Paint provides high-solids formulation for bright, visible markings on concrete, pavement, gravel, grass, brick, and asphalt. Fast drying, formula penetrates and adheres to hot surfaces, and Spray-Thru(TM) cap and non-clogging spray tip provides smooth, constant application. Formulations are VOC and MIR...
Read More »
Epoxy Coating protects rebar from rust and corrosion.
Krylon-® Industrial Tough Coat-® Rebar Green Epoxy creates protective coating that resists chipping and peeling, and guards against rust stain bleed-through when rebar is encased in cement or concrete. Available in 16-oz cans, high-solids formula adheres to most substrates. It is applied using EZ TOUCH-® FANSPRAY-® nozzle, which sprays in horizontal or vertical pattern.
Read More »
Caulk Guns provide drip-free operation.
White Lightening DRIPLESSÃ-® Caulk Guns immediately stop caulk flow upon trigger release. Self-locking plunger nut and extra welds prevent end cap failure, while ladder hook keeps gun within convenient reach. Line includes 10 oz dripless skeleton gun with rotating barrel, and 10 and 29 oz dripless, heavy-duty cradle gun with ratchet drive.
Read More »
Epoxy Coating is suited for petrochemical facilities.
Fast CladÃ-® Edge Retentive Epoxy enables immersion service in 24 hr. Low odor, low-VOC, Bisphenol A amine coating offers greater than 70% edge build retention for corrosion resistance. When applied at 20.0 mils wet at 50% RH, the 98% solids tank lining is dry to touch in 1 hr and can be walked on within 4 hr. Designed for plural-component application equipment, product is suited for use over...
Read More »Bob Murphy is the Focus Market Manager for Water and Wastewater for Sherwin-Williams Industrial and Marine Coatings
Bob Murphy is the Focus Market Manager for Water and Wastewater for Sherwin-Williams Industrial and Marine Coatings. A corrosion and water/wastewater industry veteran for more than 20 years, Murphy holds a bachelor's degree in Geology and Environmental Science from Thiel College in Greenville, Penn. He is an active member of Society of Protective Coatings (SSPC), and is a member of the American...
Read More »W. Doni Riddle Vice President, Industrial and Marine Marketing
Doni Riddle's expertise in the industrial and maintenance segment of the painting market might well be greater than the great state of Texas, from which he hails. This Vice President of Industrial and Marine Marketing for The Sherwin-Williams Company has more than two decades of sales, marketing and management experience, including a 15-year tenure with North America's largest manufacturer and...
Read More »Software aids in maintenance painting analyses.
Site Survey(TM) provides long-term budgetary analyses of on-site plant survey data to improve maintenance painting planning. Run on Microsoft Office platform, standalone program lets users enter data to catalog and evaluate plant assets, estimate current and future maintenance painting expenses, and generate cost comparisons for various budget scenarios. Created reports identify maintenance...
Read More »
Enamel Coating dries to touch in 15 minutes.
Suited for interior or exterior use, KEM 4000 High Solids Acrylic Alkyd Enamel provides high gloss and is VOC-compliant. For light service environments, product may be applied directly to steel without primer. Coating is ready to use with no mixing of additional components, and can be tinted to broad range of colors. KEM 4000 is suited for general metal applications including steel decking,...
Read More »
Water-Based Urethane Coating resists yellowing.
HYDROGLOSS(TM) Single-Component Urethane Coating is formulated to provide high-gloss finish with interior and exterior color and gloss retention. It is ready to brush, roll, or spray without adding and mixing additional components. With VOC content of 250 g/l, low odor formulation is recommended for water tanks, power plants, amusement parks, bridge and highway construction, and for corporate...
Read More »
Zinc-Epoxy Coating System meets Class B requirements.
Coating system consists of Steel Spec(TM) epoxy primer and Zinc Clad-® II Plus inorganic zinc rich coating and meets slip coefficient performance standards for bolted connections per ASTM and AISC specifications. Zinc Clad II Plus is solvent-based, 3-component, inorganic ethyl silicate coating that dries to handle in 20 minutes at 77-°F. Corrosion-resistant Steel-Spec topcoat can be applied at...
Read More »
Epoxy Coating is moisture tolerant.
Dura-PlateÃ-® MT Epoxy, low-VOC, 2-component, bisphenol A, epoxy-amine coating, adheres directly to damp or dry metal surfaces. Low-odor coating can be applied without regard to dew point. It provides performance comparable to MIL-P-23236C, Type VII, Class 15b and 17. Epoxy is suitable for ships, including bilge areas, and other offshore and marine structures as well as oil and fuel storage...
Read More »
Epoxy Siloxane applies in one coat.
Dual-component Polysiloxane XLE combines properties of epoxy and polyurethane in one coat. Glossy, self-priming coating is VOC-compliant and isocyanate-free and dries in 1 hr to corrosion-resistant finish. Suited for application by brush, roller, and conventional or airless spray equipment, product may be applied directly to properly prepared steel or over inorganic, zinc-rich primers. It is...
Read More »
Marking Paint provides fade resistance.
KrylonÃ-® Industrial Quik-Mark(TM) Solvent-Based, Fluorescent Orange, Inverted Marking Paint provides high-solids formulation for bright, visible markings on concrete, pavement, gravel, grass, brick, and asphalt. Fast drying, formula penetrates and adheres to hot surfaces, and Spray-Thru(TM) cap and non-clogging spray tip provides smooth, constant application. Formulations are VOC and MIR...
Read More »
Caulk Guns provide drip-free operation.
White Lightening DRIPLESSÃ-® Caulk Guns immediately stop caulk flow upon trigger release. Self-locking plunger nut and extra welds prevent end cap failure, while ladder hook keeps gun within convenient reach. Line includes 10 oz dripless skeleton gun with rotating barrel, and 10 and 29 oz dripless, heavy-duty cradle gun with ratchet drive.
Read More »