C & D Technologies, Inc.
Milwaukee, WI 53212
ADC targets dual-channel applications.
Available with commercial and military temperature range options, dual-channel 14-bit DATEL ADSD-1402S delivers 2 MS/sec sampling rate. SMT 40-pin TDIP package incorporates out-of-range indicator and all timing and control logic necessary to operate from single edge-triggered start convert pulse. Characteristics include low noise of 250 Ã-µV rms, 79 dB SNR, -80 dB THD, and 12 MHz input...
Read More »
Vehicle Battery is suited for motive power applications.
EM-LINE(TM) battery employs reduced-maintenance design engineered to maximize time between watering intervals. Able to deliver power for 3 months or longer without watering, unit helps reduce labor as well as possibility of watering errors. Battery works with Ferroresonant or SCR chargers and meets same footprint and application requirements as 85 and 125 AH batteries. Product is offered in 12-48...
Read More »Float Chargers feature built-in intelligence.
Micro ARE Series ferroresonant float rectifiers are monitored and controlled by integrated microprocessor. Large LCD display and indicator lights provide clear and concise information of unit's operation. Keypad setup of operating parameters eliminates complex configuration, reducing commissioning time. Alarms identify problem conditions and facilitate rapid troubleshooting. Chargers come in 3...
Read More »
Battery offers space-saving design.
DJ-Series has epoxy post seal design for leak-free operation. Narrow jar design and compact footprint uses up to 40 percent less rack space than comparable 100-200 A-hr products. Built-in grab feature on jars provide ease of handling. Jar and cover are constructed of flame-retardant PVC. Product is available in 100, 150, and 200 A-hr and is suited for new and replacement installations in...
Read More »Battery provides front access.
Liberty Series 1000Ã-® FAM 12-100 valve regulated lead-acid battery has front terminal to simplify installation and reduce maintenance. Battery, with 100 A-hr rating, uses low-calcium lead alloy, which extends battery life through low grid corrosion and low gassing. Features include flame retardant polypropylene jar and cover that meet UL94 VO and flame arresting one-way low-pressure release...
Read More »Valve Regulated Lead-Acid Battery suits cellular applications.
Liberty Series 2000 SuperMAXÃ-® Battery System offers 295-2,000 A-hr capacity. Positive grids improve plate performance an average of 4.6% at 8 hr rate to 1.75 vpc cutoff. Able to maintain cell compression without mechanical devices, plates are oriented horizontally. Maximizer(TM) internal catalyst reduces float current and limits oxygen and hydrogen loss. Rack base incorporates solid steel...
Read More »Battery has 2000 A-hr capacity.
LibertyÃ-® Series 2000 SuperMAX(TM) HD-2000 valve regulated lead-acid battery features horizontal plate orientation and movable positive post seal. System has rack frames, removable shelves, and solid base plate. Two Maximizer(TM) catalysts aid in recombination process, reduce float current, and maintain cell capacity. Low gravity model SuperMAX HDL-1700 is for low float applications at 2.2O...
Read More »
Valve-Regulated Batteries provide renewable energy storage.
VR Solar(R) 12 V modular units are suitable for standby systems requiring extended float. They allow for easy connection in series or parallel to match user requirements (12 to 120+ V). Batteries have long discharge capability allowing for consecutive days of usage and are capable of retaining maximum stored energy while in standby mode. They require no special ventilation and no watering.
Read More »
Battery Monitor checks float current.
Float Charging Current Probe (FCCP) monitors float charging current on up to 2 strings of VRLA batteries. Non-intrusive sensor is easy to install in new and existing applications. It monitors internal current changes in batteries over time and allows sufficient duration to react prior to possible catastrophic event.
Read More »
Flooded Battery provides backup power.
LCT II-1700 standby battery has floating epoxy post seal and solid copper posts to improve short duration rates of less than 5 hr. Applications include central office, Internet backup, data centers, outside plant, and wireless.
Read More »C&D Technologies Names Neil E. Daniels Vice President, Corporate Controller and Treasurer
BLUE BELL, Pa., Oct. 16 -- C&D Technologies, Inc. (NYSE: CHP), a leading global producer and marketer of electrical power storage and conversion products used in telecommunications, industrial and motive applications, announced that Neil E. Daniels has been named Vice President, Corporate Controller and Treasurer. Prior to joining C&D, Mr. Daniels held various positions with IKON Office...
Read More »C&D Technologies and IdaTech Announce Agreement for Fuel Cell Solutions
BLUE BELL, Pa., Dec. 19 -- C&D Technologies, Inc. (NYSE: CHP), a leading North American producer and marketer of electrical power storage and conversion systems used in telecommunications, industrial and motive applications, announced today that it has reached an agreement with IdaTech, LLC, a global fuel cell solutions developer and manufacturer, to resell IdaTech's fuel cell solutions. We are...
Read More »
ADC targets dual-channel applications.
Available with commercial and military temperature range options, dual-channel 14-bit DATEL ADSD-1402S delivers 2 MS/sec sampling rate. SMT 40-pin TDIP package incorporates out-of-range indicator and all timing and control logic necessary to operate from single edge-triggered start convert pulse. Characteristics include low noise of 250 Ã-µV rms, 79 dB SNR, -80 dB THD, and 12 MHz input...
Read More »
Vehicle Battery is suited for motive power applications.
EM-LINE(TM) battery employs reduced-maintenance design engineered to maximize time between watering intervals. Able to deliver power for 3 months or longer without watering, unit helps reduce labor as well as possibility of watering errors. Battery works with Ferroresonant or SCR chargers and meets same footprint and application requirements as 85 and 125 AH batteries. Product is offered in 12-48...
Read More »Float Chargers feature built-in intelligence.
Micro ARE Series ferroresonant float rectifiers are monitored and controlled by integrated microprocessor. Large LCD display and indicator lights provide clear and concise information of unit's operation. Keypad setup of operating parameters eliminates complex configuration, reducing commissioning time. Alarms identify problem conditions and facilitate rapid troubleshooting. Chargers come in 3...
Read More »
Battery offers space-saving design.
DJ-Series has epoxy post seal design for leak-free operation. Narrow jar design and compact footprint uses up to 40 percent less rack space than comparable 100-200 A-hr products. Built-in grab feature on jars provide ease of handling. Jar and cover are constructed of flame-retardant PVC. Product is available in 100, 150, and 200 A-hr and is suited for new and replacement installations in...
Read More »Battery provides front access.
Liberty Series 1000Ã-® FAM 12-100 valve regulated lead-acid battery has front terminal to simplify installation and reduce maintenance. Battery, with 100 A-hr rating, uses low-calcium lead alloy, which extends battery life through low grid corrosion and low gassing. Features include flame retardant polypropylene jar and cover that meet UL94 VO and flame arresting one-way low-pressure release...
Read More »Valve Regulated Lead-Acid Battery suits cellular applications.
Liberty Series 2000 SuperMAXÃ-® Battery System offers 295-2,000 A-hr capacity. Positive grids improve plate performance an average of 4.6% at 8 hr rate to 1.75 vpc cutoff. Able to maintain cell compression without mechanical devices, plates are oriented horizontally. Maximizer(TM) internal catalyst reduces float current and limits oxygen and hydrogen loss. Rack base incorporates solid steel...
Read More »Battery has 2000 A-hr capacity.
LibertyÃ-® Series 2000 SuperMAX(TM) HD-2000 valve regulated lead-acid battery features horizontal plate orientation and movable positive post seal. System has rack frames, removable shelves, and solid base plate. Two Maximizer(TM) catalysts aid in recombination process, reduce float current, and maintain cell capacity. Low gravity model SuperMAX HDL-1700 is for low float applications at 2.2O...
Read More »
Valve-Regulated Batteries provide renewable energy storage.
VR Solar(R) 12 V modular units are suitable for standby systems requiring extended float. They allow for easy connection in series or parallel to match user requirements (12 to 120+ V). Batteries have long discharge capability allowing for consecutive days of usage and are capable of retaining maximum stored energy while in standby mode. They require no special ventilation and no watering.
Read More »