Bindicator
Spartanburg, SC 29306
Level Switches are offered in 3 models.
Housed in NEMA 4X polyester coated, explosion proof enclosure, Roto-Bin-DicatorÃ-® point level switches consist of original model, Super-Safe-Plus Roto-Bin-DicatorÃ-®, and Mini Roto-Bin-DicatorÃ-®. Super-Safe-Plus model has external function test and 2 external LEDs that indicate power and operation status, while Compact Mini Roto-Bin-Dicator fits into tight places and has adjustable...
Read More »
Inventory Management System handles up to 99 level sensors.
Model GP-4 Yo-Yo Inventory Management System consists of GP-4 weight-and-cable level-measurement sensor and NEMA 4x Remote Display. Sensor has 4-20 mA output with adjustable span, RS-485 communication, and optional integral telephone modem. Silos up to 100 ft can be measured with resolution of 0.39 in. With Remote Display, up to 99 GP-4 sensors can be remotely set-up and configured, and...
Read More »
Ceramic Probe withstands temperatures of 450-
Radio frequency sensing probe is suited for applications where temperatures exceed 450Ã-
Read More »
Level Sensor works where other sensors fail.
Phase TrackerÃ-® uses an electromagnetic field that senses mass of material in 6 in. diameter area around sensor. It is not affected by signals reflecting off tank sidewalls, cannot be blinded by dust, and can reliably measure product when cross members and irregular structures are present. It works in dust, foam, non-air vapor, fumes, changing and low dielectric constants, abrasives and...
Read More »
Hopper Level Switch has built in diagnostic lights.
RF 9200 Pressure Feeder Switch indicates when hopper transporter is full. Power and alarm indicating lights show condition of sensor. They indicate when power is at sensor, when it is properly tuned to application, or when sensor has excess material buildup and needs recalibration. Entire system can be tested using magnet, which comes in pocket-size, easy-to-use fob. RF 12000 is a remote version...
Read More »
Aerator restores flow characteristics to bulk materials.
Bin-Flo(R) Aerator restores original capacity of any dry, pulverized material to flow readily from bins, hoppers, or through chutes. This flow characteristic exists when air is present in material. After storage, air escapes, allowing material to pack, thus preventing flow. Aerator replaces air so material again moves freely. Aerator layout can be designed for any variations in bin size and...
Read More »
Point Level Sensors are explosion-proof.
RF (radio frequency) level controls include RF 9200 and RF 11000/12000 Series, offer covers that do not need to be removed for calibration, which is accomplished through magnetic calibration technique. Remote Probes are listed as intrinsically safe. Remote versions of RF Series are available for high temperature applications over 1000Ã-
Read More »
Software provides real time silo levels at a glance.
i-LEVEL Inventory Manager, when used with Bindicator's Phase Tracker silo level monitoring systems, gives up-to-the-minute silo levels. Software provides Windows 95/98 and NT interface to view numerical and graphic data and allows inventory levels to be communicated to suppliers. Custom display shows pounds, gallons, feet, meters or other engineering units. Features include trending and data...
Read More »
Inventory Management System suits tank and silo inventory.
Mark III Yo-YoÃ-® Inventory Management System provides accurate and reliable inventory management information for tanks and silos. Mark III is FM-approved and rated for use in hazardous environments. Its sensor is housed in explosion-proof polyester-coated, cast aluminum housing. It may be interfaced to computer, PLC, or Bindicator solid state readout. Bindicator readout displays levels to...
Read More »
Level Switches are offered in 3 models.
Housed in NEMA 4X polyester coated, explosion proof enclosure, Roto-Bin-DicatorÃ-® point level switches consist of original model, Super-Safe-Plus Roto-Bin-DicatorÃ-®, and Mini Roto-Bin-DicatorÃ-®. Super-Safe-Plus model has external function test and 2 external LEDs that indicate power and operation status, while Compact Mini Roto-Bin-Dicator fits into tight places and has adjustable...
Read More »
Inventory Management System handles up to 99 level sensors.
Model GP-4 Yo-Yo Inventory Management System consists of GP-4 weight-and-cable level-measurement sensor and NEMA 4x Remote Display. Sensor has 4-20 mA output with adjustable span, RS-485 communication, and optional integral telephone modem. Silos up to 100 ft can be measured with resolution of 0.39 in. With Remote Display, up to 99 GP-4 sensors can be remotely set-up and configured, and...
Read More »
Ceramic Probe withstands temperatures of 450-
Radio frequency sensing probe is suited for applications where temperatures exceed 450Ã-
Read More »
Level Sensor works where other sensors fail.
Phase TrackerÃ-® uses an electromagnetic field that senses mass of material in 6 in. diameter area around sensor. It is not affected by signals reflecting off tank sidewalls, cannot be blinded by dust, and can reliably measure product when cross members and irregular structures are present. It works in dust, foam, non-air vapor, fumes, changing and low dielectric constants, abrasives and...
Read More »
Hopper Level Switch has built in diagnostic lights.
RF 9200 Pressure Feeder Switch indicates when hopper transporter is full. Power and alarm indicating lights show condition of sensor. They indicate when power is at sensor, when it is properly tuned to application, or when sensor has excess material buildup and needs recalibration. Entire system can be tested using magnet, which comes in pocket-size, easy-to-use fob. RF 12000 is a remote version...
Read More »
Aerator restores flow characteristics to bulk materials.
Bin-Flo(R) Aerator restores original capacity of any dry, pulverized material to flow readily from bins, hoppers, or through chutes. This flow characteristic exists when air is present in material. After storage, air escapes, allowing material to pack, thus preventing flow. Aerator replaces air so material again moves freely. Aerator layout can be designed for any variations in bin size and...
Read More »
Point Level Sensors are explosion-proof.
RF (radio frequency) level controls include RF 9200 and RF 11000/12000 Series, offer covers that do not need to be removed for calibration, which is accomplished through magnetic calibration technique. Remote Probes are listed as intrinsically safe. Remote versions of RF Series are available for high temperature applications over 1000Ã-
Read More »
Software provides real time silo levels at a glance.
i-LEVEL Inventory Manager, when used with Bindicator's Phase Tracker silo level monitoring systems, gives up-to-the-minute silo levels. Software provides Windows 95/98 and NT interface to view numerical and graphic data and allows inventory levels to be communicated to suppliers. Custom display shows pounds, gallons, feet, meters or other engineering units. Features include trending and data...
Read More »
Inventory Management System suits tank and silo inventory.
Mark III Yo-YoÃ-® Inventory Management System provides accurate and reliable inventory management information for tanks and silos. Mark III is FM-approved and rated for use in hazardous environments. Its sensor is housed in explosion-proof polyester-coated, cast aluminum housing. It may be interfaced to computer, PLC, or Bindicator solid state readout. Bindicator readout displays levels to...
Read More »