Mosaic Industries, Inc
Newark, CA 94560
Share:
Data Acquisition System offers high-resolution measurements.
Mounted on single board computer, 24/7 Data Acquisition Wildcard accepts low level signals directly from transducers, amplifies and conditions them, and converts them with 24 bits of resolution with no missing codes. Analog-to-digital subsystem performs signal conditioning and conversion for up to 7 input channels, with conversion rate programmable from 4.8 Hz to over 1,010 Hz. Measuring 2 x 2.5...
Read More »DAQ Board delivers high resolution data acquisition.
Designed to deliver high resolution DAQ, QCard incorporates C-programmable computer, 16 MHz 68HC11F1 Motorola microprocessor, up to 1 Mb of memory, communications, analog and digital I/O, and expansion I/O bus onto board. On-board I/O includes 8 digital I/O lines with counter/timer capabilities, 8 analog inputs, synchronous SPI serial interface, and dual RS232/485 ports. QCard can host up to 4...
Read More »
Handheld Platform helps prototype portable instruments.
Mosaic Handheld integrates 3.4 in. graphics display, keypad with customizable overlay, expansion I/O bus, and power conditioning and battery charger circuitry. Up to 4 I/O expansion modules can be plugged inside instrument to customize platform for specific application. Processor Board hosts 16 MHz Motorola 68HC11F1 microprocessor, and on-board I/O includes 8 digital I/O lines, 8 analog inputs,...
Read More »
Instrument Controller features touchscreen-operated GUI.
QScreen Controller(TM) is a C-programmable embedded computer powered by HC11 Motorola microprocessor. It features real-time multitasking operating system, hundreds of pre-coded device drivers, up to 1 M Flash, and 512 K RAM. Controller commands eight 8-bit A/D lines, 8 digital I/O lines, and 2 RS232/485 ports. It can host up to 7 stackable Wildcard(TM) I/O modules. Applications include scientific...
Read More »
Operator Interface provides display and keypad for SBC.
Mounted directly on QCard(TM) SBC, 2 x 2.5 in. Keypad/Display Wildcard(TM) provides interface with 4 x 20 character display and 4 x 5 keypad. Ribbon cable interface enables custom placement of keypad and display in instrument, and field header brings out 4 nibble-wise programmable I/O lines and 4 input lines. Product is suited for hand-held or space-constrained applications that require...
Read More »
Single Board Computer suits space-restrained applications.
QCard expandable embedded controller consists of 2 x 2.5 in. SBC that incorporates up to 1 MB of memory, communications capabilities, and expansion I/O bus. Powered by 16 MHz Motorola 68HC11F1 microprocessor, controller also features 512K Flash, and 128-512 K RAM, and 320 bytes EEPROM. On-board I/O includes 8 digital I/O lines with counter/timer capabilities, 8 analog inputs, synchronous SPI...
Read More »
Software Kit builds graphical interface for controller.
GUI Toolkit helps design and implement graphical interface on QVGA Controller to monitor and control instruments or industrial processes. Display screens and graphics objects are developed using any Windows paint program. GUI Toolkit can display system status using graphical representations, such as bar graphs or text-based messages. QVGA Controller mates embedded computer to 320 x 240 pixel EL...
Read More »
Stackable I/O Modules suit conversion applications.
Modular, 2 x 2.5 in. Wildcards are suited for applications requiring multiple I/O points, data acquisition, and real-time control. Plug-in boards include pre-coded device drivers that provide full access to functions using C or Forth programming languages. Up to 8 modules may be connected at once, providing up to 56 24-bit A/D inputs, 160 programmable digital I/O lines, 32 AC control lines, or 24...
Read More »
Embedded Controller includes 320 x 240 pixel display.
Model QVGA Controller(TM) consists of C-programmable embedded computer with touchscreen-controlled GUI on 1/4 VGA display. It commands eight 12-bit analog input channels, eight 8-bit analog inputs, eight 8-bit D/A lines, 24 digital I/O, 4 high current drivers, and two RS232/485 ports. Unit features real-time multitasking operating system, hundreds of pre-coded device drivers, 512 K Flash and 512...
Read More »
Expansion Modules enhance Panel-Touch Controller abilities.
Wildcards, modular 2 x 2.5 in. plug-in boards, are available for 24-bit sigma-delta A/D converters, RS-485 serial communications, and 16-bit A/D and 12-bit D/A conversion. Other modules are available for opto-isolated control of DC and AC loads, voltage switching, and removable mass memory cards. They are suited for applications requiring multiple I/O points, high resolution, data acquisition,...
Read More »Data Acquisition System offers high-resolution measurements.
Mounted on single board computer, 24/7 Data Acquisition Wildcard accepts low level signals directly from transducers, amplifies and conditions them, and converts them with 24 bits of resolution with no missing codes. Analog-to-digital subsystem performs signal conditioning and conversion for up to 7 input channels, with conversion rate programmable from 4.8 Hz to over 1,010 Hz. Measuring 2 x 2.5...
Read More »DAQ Board delivers high resolution data acquisition.
Designed to deliver high resolution DAQ, QCard incorporates C-programmable computer, 16 MHz 68HC11F1 Motorola microprocessor, up to 1 Mb of memory, communications, analog and digital I/O, and expansion I/O bus onto board. On-board I/O includes 8 digital I/O lines with counter/timer capabilities, 8 analog inputs, synchronous SPI serial interface, and dual RS232/485 ports. QCard can host up to 4...
Read More »
Handheld Platform helps prototype portable instruments.
Mosaic Handheld integrates 3.4 in. graphics display, keypad with customizable overlay, expansion I/O bus, and power conditioning and battery charger circuitry. Up to 4 I/O expansion modules can be plugged inside instrument to customize platform for specific application. Processor Board hosts 16 MHz Motorola 68HC11F1 microprocessor, and on-board I/O includes 8 digital I/O lines, 8 analog inputs,...
Read More »
Instrument Controller features touchscreen-operated GUI.
QScreen Controller(TM) is a C-programmable embedded computer powered by HC11 Motorola microprocessor. It features real-time multitasking operating system, hundreds of pre-coded device drivers, up to 1 M Flash, and 512 K RAM. Controller commands eight 8-bit A/D lines, 8 digital I/O lines, and 2 RS232/485 ports. It can host up to 7 stackable Wildcard(TM) I/O modules. Applications include scientific...
Read More »
Operator Interface provides display and keypad for SBC.
Mounted directly on QCard(TM) SBC, 2 x 2.5 in. Keypad/Display Wildcard(TM) provides interface with 4 x 20 character display and 4 x 5 keypad. Ribbon cable interface enables custom placement of keypad and display in instrument, and field header brings out 4 nibble-wise programmable I/O lines and 4 input lines. Product is suited for hand-held or space-constrained applications that require...
Read More »
Single Board Computer suits space-restrained applications.
QCard expandable embedded controller consists of 2 x 2.5 in. SBC that incorporates up to 1 MB of memory, communications capabilities, and expansion I/O bus. Powered by 16 MHz Motorola 68HC11F1 microprocessor, controller also features 512K Flash, and 128-512 K RAM, and 320 bytes EEPROM. On-board I/O includes 8 digital I/O lines with counter/timer capabilities, 8 analog inputs, synchronous SPI...
Read More »
Software Kit builds graphical interface for controller.
GUI Toolkit helps design and implement graphical interface on QVGA Controller to monitor and control instruments or industrial processes. Display screens and graphics objects are developed using any Windows paint program. GUI Toolkit can display system status using graphical representations, such as bar graphs or text-based messages. QVGA Controller mates embedded computer to 320 x 240 pixel EL...
Read More »
Stackable I/O Modules suit conversion applications.
Modular, 2 x 2.5 in. Wildcards are suited for applications requiring multiple I/O points, data acquisition, and real-time control. Plug-in boards include pre-coded device drivers that provide full access to functions using C or Forth programming languages. Up to 8 modules may be connected at once, providing up to 56 24-bit A/D inputs, 160 programmable digital I/O lines, 32 AC control lines, or 24...
Read More »
Embedded Controller includes 320 x 240 pixel display.
Model QVGA Controller(TM) consists of C-programmable embedded computer with touchscreen-controlled GUI on 1/4 VGA display. It commands eight 12-bit analog input channels, eight 8-bit analog inputs, eight 8-bit D/A lines, 24 digital I/O, 4 high current drivers, and two RS232/485 ports. Unit features real-time multitasking operating system, hundreds of pre-coded device drivers, 512 K Flash and 512...
Read More »
Expansion Modules enhance Panel-Touch Controller abilities.
Wildcards, modular 2 x 2.5 in. plug-in boards, are available for 24-bit sigma-delta A/D converters, RS-485 serial communications, and 16-bit A/D and 12-bit D/A conversion. Other modules are available for opto-isolated control of DC and AC loads, voltage switching, and removable mass memory cards. They are suited for applications requiring multiple I/O points, high resolution, data acquisition,...
Read More »