Banner Engineering Corp.
Minneapolis, MN 55440
Laser Sensors utilize Class 1 lasers.
WORLD-BEAMÃ-® 1 QS18LD Laser Diffuse and QS18LLP Laser Retroreflective Sensors offer sensing range of 300 mm and 10 m, respectively. Single-turn potentiometer on back of sensors allows user adjustment, while crosstalk rejection algorithm protects against optical disturbances from adjacent sensors. Green and amber status LEDs are visible from 360Ã-
Read More »
Light Curtain System suits low risk Type 2 applications.
Designed for applications that will not cause serious bodily harm, EZ-SCREENÃ-® Type 2 offers detection range up to 15 m with 30 mm resolution. Independently powered, 2-piece system is optically synchronized and requires only emitter and receiver pair. Intuitive, visible status LEDs indicate power on, fault, beam alignment, and beam/output status. Trip output model automatically resets when...
Read More »
Bar Code Reader scans 1D and 2D bar codes.
Available with in-line or right-angle lens, self-contained PresencePLUSÃ-® P4 BCR Vision Sensor reads Data Matrix ECC200 and PDF 417, as well as linear codes such as Code 39, Code 128, Codabar, Interleaved 2 of 5, EAN-8, and EAN-13. Remote TEACH allows sensor to learn features to inspect for, without connecting to PC or shutting down production line. Operating on 10-30 Vdc, system interfaces...
Read More »
Ultrasonic Sensors offer chemical resistance.
Suited for variety of level control applications, U-GAGEÃ-® Sensors feature factory-installed TeflonÃ-® flange and film coating bonded over transducer, sealing against gases and vapors. QT50U models offer sensing range of 200 mm to 8 m, while T30U models feature 300 mm to 1.5 m sensing range. Both include TEACH programming, fully encapsulated IP67/NEMA 6P design, status LEDs, and inherent...
Read More »
IR Temperature Sensors feature teachable technology.
Non-contact, passive T-GAGE(TM) sensors detect objects that are hotter or colder than ambient condition and trigger output. Set-up is facilitated via Manual or Dynamic TEACH-mode push-button programming, which requires no potentiometer adjustments. Able to operate even if product is not moving, sensors detect temperatures from 0-300Ã-
Read More »
Safety Elements enable flexible perimeter guarding.
Non-contact fiber optic PICO-GUARD(TM) Points enable multiple emitter and receiver points to be arranged to create customized optical safety grid that meets Safety Category 4 requirements. Resistant to damage from moisture and debris, IP67-rated products operate with light and use no electricity. Safety elements with 12 mm polycarbonate threaded barrel have operating range of 1.5-6.4 m, whereas...
Read More »
Distance Sensors come in dc and universal voltage models.
WORLD-BEAMÃ-® QS30 Series, available in 10-30 Vdc or 12-250 Vdc/24-250 Vac universal voltage formats, features IP67-sealed housing with EMI/RFI protected circuitry and status indicator. Products come in opposed, diffuse, retroreflective, polarized retroreflective, and fixed-field models. While dc sensors feature solid-state bipolar outputs, self-contained photoelectric ac/dc universal voltage...
Read More »
Indicator Lights provide multiple status colors.
EZ-LIGHTs(TM) feature solid or flashing lights that indicate status of machine or process. Sealed and IP67-rated, units are water- and oil-tight with solid-state design that has no bulbs to replace. Configurations include general-purpose red/yellow/green, multicolor 7-function with pre-configured flashing sequences, and remote indicator for EZ-SCREENÃ-® safety light curtain status. All are...
Read More »
Fiber Optic Sensor is available in 3 versions.
Offering 4-mode power and speed settings, D10 Expert(TM) with Numeric Display provides 2 discrete outputs in same sensor, or 1 discrete output and 4-20 mA current or 0-10 Vdc analog output in same sensor. D10 Expert(TM) with Bargraph Display features 8-segment display, while Discrete Output D10 model features 12-turn manual sensitivity adjustment and pulse rate LED for signal strength indication....
Read More »
Vision Sensor offers 1.3 megapixel resolution.
Performing up to 1,200 inspections/min, P4 EDGE 1.3 uses 1,280 x 1,024 pixel imager to capture minute details of multiple features at ranges from a few inches to several feet. Self-contained system is available with in-line and right-angle lens positions, and mounting brackets facilitate attachment to machines or conveyors. Operating on 10-30 Vdc, sensor is available with various lighting and...
Read More »