Dosatron International, Inc.
Clearwater, FL 33765
Dozer-Mounted Delivery Kits enable precise nutrient management.
Powered by Dosatron D8 Series dosers, 1 Â-½ in. do-it-yourself (DIY) Nutrient Delivery System Kits include Starter Kit, Mixing Chamber Kit, and Monitor Kit. Products, designed for facilitated use and maintenance, provide precise nutrient management in larger indoor and outdoor environments. Functionality helps eliminate waste and increase yields. Depending on incoming...
Read More »
Coolant Fill System features portable design.
Designed for filling machine cells with fresh coolant, Mobile Coolant Fill System eliminates need to fill buckets and carry them to machine sumps, potentially spilling coolant and creating slip hazard. System includes roto-molded 15- or 25-gallon coolant concentrate tank, onboard proportioner, garden hose water connection swivel, No-Flat tires, and EZ fill gas nozzle style valve with fill hose....
Read More »
Arrestor Kits negate effects of water hammer.
Designed for facilitated installation, Water Hammer Arrestor Kits include everything needed to address effects of water hammer – pressure surge or wave caused whenÂ- fluid in motion is forced to stop or change directions suddenly. Kit components include stainless steel water hammer arrestor, tee, elbow, nipples, union, and Teflon® tape. Available for ¾, 1, 1...
Read More »
Dosatron Internation Announces Water-Powered Chemical Injectors Tested and Certified by NSF International
CLEARWATER, FlaÂ- - Dosatron International, Inc. announces that two water-powered chemical injectors, the D14WL2NAFII and D14WL3000NAFII were tested and Certified by NSF International. “We are excited to provide the only water-powered injectors that have been NSF/ANSI 61 Certified,” said Jason Maddox, Dosatron’s Regional Sales Manager. “Being NSF Certified means that Dosatron has two...
Read More »
Injectors have hydroponic stems optimized for readability.
Respectively rated at 11 and 14 gpm, D25RE09BPVFHY and D14MZ3000BPVFHY are available with stems that read in milliliters (mL) and teaspoons (tsp) per gallon. This feature accommodates needs of Hydroponic growers by helping to foster increased accuracy when mixing without requiring conversion chart.
Read More »Digital Handheld Meters/Testers measure EC, TDS, temp, and pH.
Available in professional and economy versions, HM digital handheld meters and testers increase efficiency of mineral nutrient water tests. These waterproof products are capable of measuring Electrical Conductivity (EC), Total Dissolved Solids (TDS), and temperature or Potential of Hydrogen (pH) and temperature.
Read More »
Dosatron International Announces Multiple Fertilizer System Installation
CLEARWATER, Fla – Dosatron International, Inc. today announces the installation of a large, multiple Dosatron fertilizer injection system. We are so excited that one of our customers for almost 30 years on Long Island has recently installed, possibly the largest Dosatron fertilizer system to date." explains Lela Kelly, Dosatron’s Vice President and Horticulture Specialist. "This expert...
Read More »
Nutrient Delivery Systems are customizable to grower's needs.
Powered by Dosatron dosers, Nutrient Delivery System Kits consist of Starter Kit, Mixing Chamber Kit, and Monitor Kit and are designed to perform in both indoor and outdoor environments. Kits provide nutrient management, eliminating waste and maximizing yields. Users may add up to 8 Dosatron dosers, such as D25RE09 – 11 GPM, D14MZ2 – 14 GPM, D14MZ10 – 14 GPM, or D14MZ3000 – 14 GPM.
Read More »Fertilizer/Chemical Injector fosters precision in CEA.
Manufactured from chemical-resistant polypropylene, D14MZ2 is designed for Controlled Environment Agriculture (CEA)Â- – hydroponics, rooftop and tower gardens, urban agriculture, and more. This 14 gpm fertilizer and chemical injector can automate processes to create fine-tuned, multi-chemical mixes with precise and repeatable results. Water-powered unit features 1:500 to 1:50...
Read More »Chemical Injector accommodates small dose requirements.
With injection range of 1:3000–1:800 (0.03%–0.125%), D8RE3000 accommodates dose application requirements for application of peracetic acid (PAA), quaternary ammonium, and other food sanitation chemicals. Chemical injector is manufactured from chemical-resistant polypropylene, and is targeted toward sanitizing applications and food processing industry.
Read More »Dozer-Mounted Delivery Kits enable precise nutrient management.
Powered by Dosatron D8 Series dosers, 1 Â-½ in. do-it-yourself (DIY) Nutrient Delivery System Kits include Starter Kit, Mixing Chamber Kit, and Monitor Kit. Products, designed for facilitated use and maintenance, provide precise nutrient management in larger indoor and outdoor environments. Functionality helps eliminate waste and increase yields. Depending on incoming...
Read More »
Coolant Fill System features portable design.
Designed for filling machine cells with fresh coolant, Mobile Coolant Fill System eliminates need to fill buckets and carry them to machine sumps, potentially spilling coolant and creating slip hazard. System includes roto-molded 15- or 25-gallon coolant concentrate tank, onboard proportioner, garden hose water connection swivel, No-Flat tires, and EZ fill gas nozzle style valve with fill hose....
Read More »
Arrestor Kits negate effects of water hammer.
Designed for facilitated installation, Water Hammer Arrestor Kits include everything needed to address effects of water hammer – pressure surge or wave caused whenÂ- fluid in motion is forced to stop or change directions suddenly. Kit components include stainless steel water hammer arrestor, tee, elbow, nipples, union, and Teflon® tape. Available for ¾, 1, 1...
Read More »
Dosatron Internation Announces Water-Powered Chemical Injectors Tested and Certified by NSF International
CLEARWATER, FlaÂ- - Dosatron International, Inc. announces that two water-powered chemical injectors, the D14WL2NAFII and D14WL3000NAFII were tested and Certified by NSF International. “We are excited to provide the only water-powered injectors that have been NSF/ANSI 61 Certified,” said Jason Maddox, Dosatron’s Regional Sales Manager. “Being NSF Certified means that Dosatron has two...
Read More »
Injectors have hydroponic stems optimized for readability.
Respectively rated at 11 and 14 gpm, D25RE09BPVFHY and D14MZ3000BPVFHY are available with stems that read in milliliters (mL) and teaspoons (tsp) per gallon. This feature accommodates needs of Hydroponic growers by helping to foster increased accuracy when mixing without requiring conversion chart.
Read More »Digital Handheld Meters/Testers measure EC, TDS, temp, and pH.
Available in professional and economy versions, HM digital handheld meters and testers increase efficiency of mineral nutrient water tests. These waterproof products are capable of measuring Electrical Conductivity (EC), Total Dissolved Solids (TDS), and temperature or Potential of Hydrogen (pH) and temperature.
Read More »
Dosatron International Announces Multiple Fertilizer System Installation
CLEARWATER, Fla – Dosatron International, Inc. today announces the installation of a large, multiple Dosatron fertilizer injection system. We are so excited that one of our customers for almost 30 years on Long Island has recently installed, possibly the largest Dosatron fertilizer system to date." explains Lela Kelly, Dosatron’s Vice President and Horticulture Specialist. "This expert...
Read More »
Nutrient Delivery Systems are customizable to grower's needs.
Powered by Dosatron dosers, Nutrient Delivery System Kits consist of Starter Kit, Mixing Chamber Kit, and Monitor Kit and are designed to perform in both indoor and outdoor environments. Kits provide nutrient management, eliminating waste and maximizing yields. Users may add up to 8 Dosatron dosers, such as D25RE09 – 11 GPM, D14MZ2 – 14 GPM, D14MZ10 – 14 GPM, or D14MZ3000 – 14 GPM.
Read More »Fertilizer/Chemical Injector fosters precision in CEA.
Manufactured from chemical-resistant polypropylene, D14MZ2 is designed for Controlled Environment Agriculture (CEA)Â- – hydroponics, rooftop and tower gardens, urban agriculture, and more. This 14 gpm fertilizer and chemical injector can automate processes to create fine-tuned, multi-chemical mixes with precise and repeatable results. Water-powered unit features 1:500 to 1:50...
Read More »Chemical Injector accommodates small dose requirements.
With injection range of 1:3000–1:800 (0.03%–0.125%), D8RE3000 accommodates dose application requirements for application of peracetic acid (PAA), quaternary ammonium, and other food sanitation chemicals. Chemical injector is manufactured from chemical-resistant polypropylene, and is targeted toward sanitizing applications and food processing industry.
Read More »