Smartflow by Burger & Brown Engineering, Inc.

Tracer®VM DuraGuard™
Test & Measurement

Tracer®VM DuraGuard™

Burger & Brown Engineering is pleased to release a new product accessory for the Tracer®VM line of flowmeters assembled to a Smartflow manifold. The Tracer®VM DuraGuard is a corrosion-resistant stainless steel cover designed to provide additional rigidity and an extra layer of protection for Tracer®VM flow and temperature sensors. The DuraGuard provides a neat and clean appearance while...

Read More »
Tracer-®VM DuraGuard™
Test & Measurement

Tracer-®VM DuraGuard™

Burger & Brown Engineering is pleased to release a new product accessory for the Tracer®VM line of flowmeters assembled to a Smartflow manifold. The Tracer®VM DuraGuard is a corrosion-resistant stainless steel cover designed to provide additional rigidity and an extra layer of protection for Tracer®VM flow and temperature sensors. The DuraGuard provides a neat and clean appearance while...

Read More »
Tracer®VM Bluetooth Interface comes in water-resistant, plastic enclosure.
Controls & Controllers

Tracer®VM Bluetooth Interface comes in water-resistant, plastic enclosure.

Tracer®VM Bluetooth Interface feature Ethernet and USB ports. Unit can be operated in0 to 52°C temperature range with 8 to 28VDC external power supply. Product collects, transmits and saves flow rate and temperature data. This interface transmits flow rate and temperature to display on a mobile device up to 20 m away wirelessly. Unit’s USB port used for charging mobile devices or for...

Read More »
Tracer-®VM Bluetooth Interface comes in water-resistant, plastic enclosure.
Controls & Controllers

Tracer-®VM Bluetooth Interface comes in water-resistant, plastic enclosure.

Tracer®VM Bluetooth Interface feature Ethernet and USB ports. Unit can be operated in0 to 52°C temperature range with 8 to 28VDC external power supply. Product collects, transmits and saves flow rate and temperature data. This interface transmits flow rate and temperature to display on a mobile device up to 20 m away wirelessly. Unit’s USB port used for charging mobile devices or for...

Read More »
Tracer®VM Bluetooth Interface features gasketed plastic enclosure.
Controls & Controllers

Tracer®VM Bluetooth Interface features gasketed plastic enclosure.

Smartflow® Tracer®VM Bluetooth Interface can connect directly with up to 8 TracerVM Base flowmeters (non-display) installed in injection mold cooling water channels. Product allows processor for viewing cooling water conditions on remote devices up to up to 20m away. Unit simplifies multiple installations with the use of power, ground and signal terminations that are present inside the housing...

Read More »
Tracer-®VM Bluetooth Interface features gasketed plastic enclosure.
Controls & Controllers

Tracer-®VM Bluetooth Interface features gasketed plastic enclosure.

Smartflow® Tracer®VM Bluetooth Interface can connect directly with up to 8 TracerVM Base flowmeters (non-display) installed in injection mold cooling water channels. Product allows processor for viewing cooling water conditions on remote devices up to up to 20m away. Unit simplifies multiple installations with the use of power, ground and signal terminations that are present inside the housing...

Read More »
Non-Industrial Products

Turbulent Flow Calculator provides free on-line service to Injection Molding Industry.

Including availability of water temperatures and ethylene glycol percentage input, Turbulent Flow Calculator demonstrates change in flow rate to achieve turbulent flow. Providing selectable metric or Imperial units, system calculates results for input coolant temperatures up to 650°F / 345°C with 0% ethylene glycol. Designed for plastic injection molders as reference, system helps in...

Read More »
Non-Industrial Products

Turbulent Flow Calculator provides free on-line service to Injection Molding Industry.

Including availability of water temperatures and ethylene glycol percentage input, Turbulent Flow Calculator demonstrates change in flow rate to achieve turbulent flow. Providing selectable metric or Imperial units, system calculates results for input coolant temperatures up to 650°F / 345°C with 0% ethylene glycol. Designed for plastic injection molders as reference, system helps in...

Read More »
Tracer®VM DuraGuard™
Test & Measurement

Tracer®VM DuraGuard™

Burger & Brown Engineering is pleased to release a new product accessory for the Tracer®VM line of flowmeters assembled to a Smartflow manifold. The Tracer®VM DuraGuard is a corrosion-resistant stainless steel cover designed to provide additional rigidity and an extra layer of protection for Tracer®VM flow and temperature sensors. The DuraGuard provides a neat and clean appearance while...

Read More »
Tracer-®VM DuraGuard™
Test & Measurement

Tracer-®VM DuraGuard™

Burger & Brown Engineering is pleased to release a new product accessory for the Tracer®VM line of flowmeters assembled to a Smartflow manifold. The Tracer®VM DuraGuard is a corrosion-resistant stainless steel cover designed to provide additional rigidity and an extra layer of protection for Tracer®VM flow and temperature sensors. The DuraGuard provides a neat and clean appearance while...

Read More »
Tracer®VM Bluetooth Interface comes in water-resistant, plastic enclosure.
Controls & Controllers

Tracer®VM Bluetooth Interface comes in water-resistant, plastic enclosure.

Tracer®VM Bluetooth Interface feature Ethernet and USB ports. Unit can be operated in0 to 52°C temperature range with 8 to 28VDC external power supply. Product collects, transmits and saves flow rate and temperature data. This interface transmits flow rate and temperature to display on a mobile device up to 20 m away wirelessly. Unit’s USB port used for charging mobile devices or for...

Read More »
Tracer-®VM Bluetooth Interface comes in water-resistant, plastic enclosure.
Controls & Controllers

Tracer-®VM Bluetooth Interface comes in water-resistant, plastic enclosure.

Tracer®VM Bluetooth Interface feature Ethernet and USB ports. Unit can be operated in0 to 52°C temperature range with 8 to 28VDC external power supply. Product collects, transmits and saves flow rate and temperature data. This interface transmits flow rate and temperature to display on a mobile device up to 20 m away wirelessly. Unit’s USB port used for charging mobile devices or for...

Read More »
Tracer®VM Bluetooth Interface features gasketed plastic enclosure.
Controls & Controllers

Tracer®VM Bluetooth Interface features gasketed plastic enclosure.

Smartflow® Tracer®VM Bluetooth Interface can connect directly with up to 8 TracerVM Base flowmeters (non-display) installed in injection mold cooling water channels. Product allows processor for viewing cooling water conditions on remote devices up to up to 20m away. Unit simplifies multiple installations with the use of power, ground and signal terminations that are present inside the housing...

Read More »
Tracer-®VM Bluetooth Interface features gasketed plastic enclosure.
Controls & Controllers

Tracer-®VM Bluetooth Interface features gasketed plastic enclosure.

Smartflow® Tracer®VM Bluetooth Interface can connect directly with up to 8 TracerVM Base flowmeters (non-display) installed in injection mold cooling water channels. Product allows processor for viewing cooling water conditions on remote devices up to up to 20m away. Unit simplifies multiple installations with the use of power, ground and signal terminations that are present inside the housing...

Read More »
Non-Industrial Products

Turbulent Flow Calculator provides free on-line service to Injection Molding Industry.

Including availability of water temperatures and ethylene glycol percentage input, Turbulent Flow Calculator demonstrates change in flow rate to achieve turbulent flow. Providing selectable metric or Imperial units, system calculates results for input coolant temperatures up to 650°F / 345°C with 0% ethylene glycol. Designed for plastic injection molders as reference, system helps in...

Read More »
Non-Industrial Products

Turbulent Flow Calculator provides free on-line service to Injection Molding Industry.

Including availability of water temperatures and ethylene glycol percentage input, Turbulent Flow Calculator demonstrates change in flow rate to achieve turbulent flow. Providing selectable metric or Imperial units, system calculates results for input coolant temperatures up to 650°F / 345°C with 0% ethylene glycol. Designed for plastic injection molders as reference, system helps in...

Read More »

All Topics