Precision Control Systems, Inc./Research Inc.
Eden Prairie, MN 55344
Infrared Chamber Heater handles tube, cable, and wire.
Utilizing 4 elliptical reflectors, ChamberIR Model E4 focuses high-density infrared energy generated by T3-style halogen lamps onto cylindrically shaped target area. Elliptical chamber rapidly heats small-size continuous materials with OD less than 0.25 in. Designed to heat up and cool down instantly in response to power control signals, lamps reach 90% of full operating temperature within 3 sec...
Read More »IR Line Heater utilizes quartz halogen lamp.
LineIRÃ-® series concentrates radiant heat to long, narrow area for applications requiring clean, responsive, non-contact heat source. Model 5194 generates energy along 0.08-0.18 in. wide lines and comes in 2.25-38 in. lengths. Capable of heating products to temperatures of 2,400Ã-
Read More »Rubber Curing System handles complex profiles.
Suited for automotive and appliance industries, ProfileIR generates intense short wave infrared energy (NIR) in heating chamber with 6 independently controlled heating zones that immediately cure surface of rubber to cast and hold profile shape. Surface cure also eliminates scuff marks and creates smooth, unblemished appearance on final product. Moveable base can be positioned on extrusion line,...
Read More »Infrared Heaters suit drying and curing applications.
PanelIR Series reach 90% of operating temperature within 3 sec of cold start while radiant energy dissipates to 10% 5 sec after power is disconnected. Model 4554 uses tubular quartz lamps backed by ceramic reflector to provide heat for areas up to 38 x 12 in., while Model 4765 uses tubular quartz, T3-style halogen lamps with ceramic reflectors to heat areas up to 38 x 66 in. Mounting two or more...
Read More »Infrared Chamber Heater uses T3 quartz halogen lamps.
Available in heated lengths of 10, 16, 25, and 38 in., ChamberIR Model 4069 provides clean heat source that does not contact product being heated. Quartz halogen lamps reach 90% of full operating temperature within 3 sec of cold start and cool down instantly in response to power control signals. Radiant energy dissipates to 10% at 5 sec after power supply is disconnected. Heater is suited for...
Read More »IR Dryer suits adhesive curing and drying applications.
DryIRÃ-® Model 6040 concentrates IR heat directly to desired area, resulting in immediate evaporation. Designed for drying applications that require clean, responsive, non-contact heat source on target areas up to 4 in. wide, IR energy emitted from each heater can be adjusted to match specific heating requirements. Featuring modular construction, air-cooled unit incorporates digital power...
Read More »Infrared Heaters suit pre-heating and curing applications.
Cylindrical ChamberIR Heaters provide controlled, concentrated infrared energy that can be adjusted to match application. Units combine water-cooled polished aluminum reflectors and T-3 quartz halogen lamps that respond instantly to power control signals. Lamps reach 90% of full operating temperature within 3 sec of cold start and radiant energy dissipates to 10% 5 sec after power supply is...
Read More »Modular Infrared Strip Heaters use parabolic reflectors.
StripIRÃ-® Series Heaters heat up and cool down in response to power control signals. They reach 90% of full operating temperature within 3 sec of cold start. Model 4184 uses T-3 style halogen lamps backed by ceramic reflector; strips up to 1.7 wide x 5 to 38 in. long can be heated up to 1,300Ã-
Read More »Infrared Heater heats small circular area.
Modified SpotIRÃ-® series heaters provide clean, non-contact, continuous heat on small target or object. Model 4150 dissipates maximum power of 250 W and heats up to 1800Ã-
Read More »
Infrared Chamber Heater handles tube, cable, and wire.
Utilizing 4 elliptical reflectors, ChamberIR Model E4 focuses high-density infrared energy generated by T3-style halogen lamps onto cylindrically shaped target area. Elliptical chamber rapidly heats small-size continuous materials with OD less than 0.25 in. Designed to heat up and cool down instantly in response to power control signals, lamps reach 90% of full operating temperature within 3 sec...
Read More »IR Line Heater utilizes quartz halogen lamp.
LineIRÃ-® series concentrates radiant heat to long, narrow area for applications requiring clean, responsive, non-contact heat source. Model 5194 generates energy along 0.08-0.18 in. wide lines and comes in 2.25-38 in. lengths. Capable of heating products to temperatures of 2,400Ã-
Read More »Rubber Curing System handles complex profiles.
Suited for automotive and appliance industries, ProfileIR generates intense short wave infrared energy (NIR) in heating chamber with 6 independently controlled heating zones that immediately cure surface of rubber to cast and hold profile shape. Surface cure also eliminates scuff marks and creates smooth, unblemished appearance on final product. Moveable base can be positioned on extrusion line,...
Read More »Infrared Heaters suit drying and curing applications.
PanelIR Series reach 90% of operating temperature within 3 sec of cold start while radiant energy dissipates to 10% 5 sec after power is disconnected. Model 4554 uses tubular quartz lamps backed by ceramic reflector to provide heat for areas up to 38 x 12 in., while Model 4765 uses tubular quartz, T3-style halogen lamps with ceramic reflectors to heat areas up to 38 x 66 in. Mounting two or more...
Read More »Infrared Chamber Heater uses T3 quartz halogen lamps.
Available in heated lengths of 10, 16, 25, and 38 in., ChamberIR Model 4069 provides clean heat source that does not contact product being heated. Quartz halogen lamps reach 90% of full operating temperature within 3 sec of cold start and cool down instantly in response to power control signals. Radiant energy dissipates to 10% at 5 sec after power supply is disconnected. Heater is suited for...
Read More »IR Dryer suits adhesive curing and drying applications.
DryIRÃ-® Model 6040 concentrates IR heat directly to desired area, resulting in immediate evaporation. Designed for drying applications that require clean, responsive, non-contact heat source on target areas up to 4 in. wide, IR energy emitted from each heater can be adjusted to match specific heating requirements. Featuring modular construction, air-cooled unit incorporates digital power...
Read More »Infrared Heaters suit pre-heating and curing applications.
Cylindrical ChamberIR Heaters provide controlled, concentrated infrared energy that can be adjusted to match application. Units combine water-cooled polished aluminum reflectors and T-3 quartz halogen lamps that respond instantly to power control signals. Lamps reach 90% of full operating temperature within 3 sec of cold start and radiant energy dissipates to 10% 5 sec after power supply is...
Read More »Modular Infrared Strip Heaters use parabolic reflectors.
StripIRÃ-® Series Heaters heat up and cool down in response to power control signals. They reach 90% of full operating temperature within 3 sec of cold start. Model 4184 uses T-3 style halogen lamps backed by ceramic reflector; strips up to 1.7 wide x 5 to 38 in. long can be heated up to 1,300Ã-
Read More »Infrared Heater heats small circular area.
Modified SpotIRÃ-® series heaters provide clean, non-contact, continuous heat on small target or object. Model 4150 dissipates maximum power of 250 W and heats up to 1800Ã-
Read More »