Lectro Engineering
Saint Louis, MO 63132
Servo-Driven Takeaway is designed for Aoki/Nissei molders.
Featuring PLC-controlled operation, 2006 High Speed Servo Takeaway is capable of 9 sec cycle times for dual row cavitation setups. Drive mechanism provides 100% accurate drops and minimizing downtime. Vacuum conveyor system will run in reverse and is equipped with blow off station for clearing preforms, allowing for accelerated startups. Takeaway also incorporates ionization blower to eliminate...
Read More »Machine treats resin to promote surface preparation.
Used in rotational molding, injection molding, or higher-volume applications such as painted automotive parts, RTS Technology allows common resins to be treated while in powder form to facilitate part decoration. It makes parts made of polyethylene, polypropylene, and thermoplastic olefins ready to accept paint, adhesives, and other decorations. Able to treat 2,000-4,000 lb of resin/hr,...
Read More »
Spin Trimmer handles offset and wide-mouth bottles.
Model MTM 742 can trim up to 150 offset neck containers per minute and is suitable for bottles made of any resin. System can change over from one bottle to another with no tooling change. It is targeted toward stretch blow and extrusion blow molding companies.
Read More »
Takeaway Detabber System suits blow molding industry.
Model 2001E works with shuttle type blow molder machines including Bekum 120, 121, 151, 155 and Fischer 054 and 106. Detabber and grippers virtually eliminate jams. Machine operates on 120 Vac single phase power and requires Ã-½ in. compressed air line with 90-100 psi. Container sizes range from 5-12 in. in height and 1.25-6.85 in. in depth. Production rate is based on production rate of blow...
Read More »
Spin Trimmer gets long-awaited improvements.
First major improvements to Model 2025 Spin Trimmer since 1988 include scrap dome jam detection device, incorrect trim detection device, audible alarm and beacon lights for detection devices, I/O PLC module for communication to other equipment, V-Belt for improved belt tracking, adjustable bottle discharge chutes with removable sides, and top acrylic dust cover.
Read More »Lectro Engineering to Sell Innovative Corona System
Lectro Engineering the world wide leader in three dimensional plastics surface treating equipment announces that it will be the North and South American representative for Corona Systems manufactured by the Kalwar Group. Kalwar has been providing systems to the European market for decades and choose Lectro to expand its reach to the Americas. It is an exclusive contract that will promote the full...
Read More »Lectro Engineering Announces New Web Site
August 5, 2008 Lectro Engineering the world wide leader in 3 dimensional plastic surface treating equipment and downstream plastic trimming machines has launched a new web site. The site includes information on all three divisions along with videos showing equipment in action. There are numerous articles on plastic surface treatement and plastic product trimming. These pieces include case studies...
Read More »
Servo-Driven Takeaway is designed for Aoki/Nissei molders.
Featuring PLC-controlled operation, 2006 High Speed Servo Takeaway is capable of 9 sec cycle times for dual row cavitation setups. Drive mechanism provides 100% accurate drops and minimizing downtime. Vacuum conveyor system will run in reverse and is equipped with blow off station for clearing preforms, allowing for accelerated startups. Takeaway also incorporates ionization blower to eliminate...
Read More »Machine treats resin to promote surface preparation.
Used in rotational molding, injection molding, or higher-volume applications such as painted automotive parts, RTS Technology allows common resins to be treated while in powder form to facilitate part decoration. It makes parts made of polyethylene, polypropylene, and thermoplastic olefins ready to accept paint, adhesives, and other decorations. Able to treat 2,000-4,000 lb of resin/hr,...
Read More »
Spin Trimmer handles offset and wide-mouth bottles.
Model MTM 742 can trim up to 150 offset neck containers per minute and is suitable for bottles made of any resin. System can change over from one bottle to another with no tooling change. It is targeted toward stretch blow and extrusion blow molding companies.
Read More »
Takeaway Detabber System suits blow molding industry.
Model 2001E works with shuttle type blow molder machines including Bekum 120, 121, 151, 155 and Fischer 054 and 106. Detabber and grippers virtually eliminate jams. Machine operates on 120 Vac single phase power and requires Ã-½ in. compressed air line with 90-100 psi. Container sizes range from 5-12 in. in height and 1.25-6.85 in. in depth. Production rate is based on production rate of blow...
Read More »
Spin Trimmer gets long-awaited improvements.
First major improvements to Model 2025 Spin Trimmer since 1988 include scrap dome jam detection device, incorrect trim detection device, audible alarm and beacon lights for detection devices, I/O PLC module for communication to other equipment, V-Belt for improved belt tracking, adjustable bottle discharge chutes with removable sides, and top acrylic dust cover.
Read More »