Amphenol RF

Amphenol Offers HD-BNC Jacks with IP-67 Sealed Interface
Electrical Equipment & Systems

Amphenol Offers HD-BNC Jacks with IP-67 Sealed Interface

The HD-BNC Jacks consist of PCB and cable mount products that are offered in connector housing made from machined brass with beryllium copper outer contacts. The units are designed to interact with Belden 4855R and 1855A. The jack bodies come with gold plated center contacts for increased electrical performance. The products are suitable for use in applications such as remote viewing, digital...

Read More »
Latest TNC Connectors Come with Crimp Termination for Quick and Secure Assembly
Electrical Equipment & Systems

Latest TNC Connectors Come with Crimp Termination for Quick and Secure Assembly

Amphenol’s TNC Connectors are offered in straight jack, bulkhead jack, straight plug and right angle plug configurations. Units are optimized for use with Low Loss 195 and 240 cables. Featuring an improved grounding and a nominal impedance of 50 ohms, the connectors deliver consistent electrical performance in DC to 6 GHz range. Units are suitable for industrial, wireless and broadband...

Read More »
New HD-EFI Board-to-Board Connector Increases Radial and Axial Float
Electrical Equipment & Systems

New HD-EFI Board-to-Board Connector Increases Radial and Axial Float

HD-EFI PCB Connector is available in through-hole, surface mount, and edge launch designs and is designed for mating multiple RF lines between printed circuit boards. Unit’s three-piece mating system uses limited detent and bore PCB connector. Connector features DC to 6 GHz operating frequency and is suitable for high-performance applications. The bullet adapters offer crash-proof mating and...

Read More »
Amphenol's New FAKRA to AMC Cable Assemblies are Suitable for Automotive and IoT Applications

Amphenol's New FAKRA to AMC Cable Assemblies are Suitable for Automotive and IoT Applications

Amphenol’s Fixed Length FAKRA to AMC Cable Assembles are available in six different metric lengths. The cable assemblies come with FAKRA Connector and micro-miniature AMC connector that allows easy connection and disconnection. The units are suitable for DSRC applications such as V2X and V2V technology, 360-degree camera and ADAS systems. FAKRA to AMC Cable Assembly are IP67 rated when mounted...

Read More »
Amphenol RF Introduces SMA End Launch Plugs with PTFE Insulator
Mechanical Components and Assemblies

Amphenol RF Introduces SMA End Launch Plugs with PTFE Insulator

High-Frequency SMA End Launch Plug Series consist of through-hole and traditional edge-launch jack options with 0.010 in. and 0.015 in. diameter center contacts. Constructed with brass body and gold plated beryllium contacts, units are suitable for microwave filter, cellular and broadband amplifier, and wireless infrastructure applications. The end plug feature 50Ω connector for high-frequency...

Read More »
Amphenol RF's Type-N Connector is optimized for LMR® 400 cable.
Electrical Equipment & Systems

Amphenol RF's Type-N Connector is optimized for LMR® 400 cable.

Type-N connector from Amphenol RF is a 50 ohm connector that operates at a frequency of DC to 6 GHz. Tool-free installation reduces termination time, eliminates hazardous fumes and safety concerns, and saves time and expense. An IP-67 rated sealed solution, the connector allows maintain high performance in harsh conditions and temporary submergence. Applications include antennas, base stations,...

Read More »
SMA Fixed Length Cable Assemblies come with black polyethylene jacket.
Electrical Equipment & Systems

SMA Fixed Length Cable Assemblies come with black polyethylene jacket.

SMA Fixed Length Cable Assemblies are available in straight plug to straight plug, straight plug to right-angle plug, straight plug to bulkhead jack and right-angle to right-angle plug configurations. Suitable for base stations, antennas and wireless communications systems, units are operated between DC to 6 GHz. Products are offered in standard imperial lengths of 6, 12, 18, 24, 36, and 48 in....

Read More »
SMPM Products use micro-miniature interface.
Electrical Equipment & Systems

SMPM Products use micro-miniature interface.

Amphenol RF’s SMPM Connectors can operate at frequency ranges of DC to 65 GHz. Units are suitable for high speed signal transmission, blind-mate, board-to-board systems and high-frequency coaxial applications. Products are available in full detent and smooth bore variants which provides engagement and disengagement forces. Connectors come with floating bullet.

Read More »
Amphenol Offers HD-BNC Jacks with IP-67 Sealed Interface
Electrical Equipment & Systems

Amphenol Offers HD-BNC Jacks with IP-67 Sealed Interface

The HD-BNC Jacks consist of PCB and cable mount products that are offered in connector housing made from machined brass with beryllium copper outer contacts. The units are designed to interact with Belden 4855R and 1855A. The jack bodies come with gold plated center contacts for increased electrical performance. The products are suitable for use in applications such as remote viewing, digital...

Read More »
Latest TNC Connectors Come with Crimp Termination for Quick and Secure Assembly
Electrical Equipment & Systems

Latest TNC Connectors Come with Crimp Termination for Quick and Secure Assembly

Amphenol’s TNC Connectors are offered in straight jack, bulkhead jack, straight plug and right angle plug configurations. Units are optimized for use with Low Loss 195 and 240 cables. Featuring an improved grounding and a nominal impedance of 50 ohms, the connectors deliver consistent electrical performance in DC to 6 GHz range. Units are suitable for industrial, wireless and broadband...

Read More »
New HD-EFI Board-to-Board Connector Increases Radial and Axial Float
Electrical Equipment & Systems

New HD-EFI Board-to-Board Connector Increases Radial and Axial Float

HD-EFI PCB Connector is available in through-hole, surface mount, and edge launch designs and is designed for mating multiple RF lines between printed circuit boards. Unit’s three-piece mating system uses limited detent and bore PCB connector. Connector features DC to 6 GHz operating frequency and is suitable for high-performance applications. The bullet adapters offer crash-proof mating and...

Read More »
Company News

Amphenol RF Supports Connected Car Infrastructure

Amphenol RF releases technical paper focusing on products relating to connected car infrastructure Danbury, CT – Amphenol RF is pleased to announce the release of its connected car focused white paper titled, “The Connector Car Market: Amphenol RF Solutions.” This technical paper explores the emerging automotive sub-market and covers relevant products that meet the needs of these...

Read More »
Amphenol's New FAKRA to AMC Cable Assemblies are Suitable for Automotive and IoT Applications

Amphenol's New FAKRA to AMC Cable Assemblies are Suitable for Automotive and IoT Applications

Amphenol’s Fixed Length FAKRA to AMC Cable Assembles are available in six different metric lengths. The cable assemblies come with FAKRA Connector and micro-miniature AMC connector that allows easy connection and disconnection. The units are suitable for DSRC applications such as V2X and V2V technology, 360-degree camera and ADAS systems. FAKRA to AMC Cable Assembly are IP67 rated when mounted...

Read More »
Amphenol RF Introduces SMA End Launch Plugs with PTFE Insulator
Mechanical Components and Assemblies

Amphenol RF Introduces SMA End Launch Plugs with PTFE Insulator

High-Frequency SMA End Launch Plug Series consist of through-hole and traditional edge-launch jack options with 0.010 in. and 0.015 in. diameter center contacts. Constructed with brass body and gold plated beryllium contacts, units are suitable for microwave filter, cellular and broadband amplifier, and wireless infrastructure applications. The end plug feature 50Ω connector for high-frequency...

Read More »
Company News

Amphenol RF Showcases Innovative Solutions for Customer-Specific Applications

The Innovation Showcase exhibits the collaborative efforts between Amphenol RF and our customers. Danbury, CT – Amphenol RF is proud to announce the launch of its Innovation Showcase, a look at customer specific solutions designed by our global team of experienced engineers. The Innovation Showcase displays products developed through collaborative efforts with customers to solve problems that...

Read More »
Amphenol RF's Type-N Connector is optimized for LMR® 400 cable.
Electrical Equipment & Systems

Amphenol RF's Type-N Connector is optimized for LMR® 400 cable.

Type-N connector from Amphenol RF is a 50 ohm connector that operates at a frequency of DC to 6 GHz. Tool-free installation reduces termination time, eliminates hazardous fumes and safety concerns, and saves time and expense. An IP-67 rated sealed solution, the connector allows maintain high performance in harsh conditions and temporary submergence. Applications include antennas, base stations,...

Read More »

All Topics