Cerro Copper Products, Inc.

Linesets come in more than 1,000 combinations.
Fluid & Gas Flow Equipment

Linesets come in more than 1,000 combinations.

CerroSet(TM) Linesets, available in combinations based on tube diameter, insulation thickness, end finish, and refrigerants, may be used in conjunction with split system air conditioning and heat pumps. Specialty linesets are available for icemakers, split system air conditioning, and chilled water systems. Both come in lengths from 10-60 ft in 5 ft intervals. Standard linesets are purged with...

Read More »
Linesets come in more than 1,000 combinations.
Fluid & Gas Flow Equipment

Linesets come in more than 1,000 combinations.

CerroSet(TM) Linesets, available in combinations based on tube diameter, insulation thickness, end finish, and refrigerants, may be used in conjunction with split system air conditioning and heat pumps. Specialty linesets are available for icemakers, split system air conditioning, and chilled water systems. Both come in lengths from 10-60 ft in 5 ft intervals. Standard linesets are purged with...

Read More »
Copper Tubing is offered in exact straight lengths.
Fluid & Gas Flow Equipment

Copper Tubing is offered in exact straight lengths.

Exact Straight Length (ESL) Copper Tube is delivered to HVAC/R OEMs, mechanically straightened and cut to precise and specific lengths for production of heat exchangers, chillers, and heaters. Lengths run from 10 in. to 25 ft. with 3/16-1 in. OD. Tube is available in tempers of H58 drawn, H80 hard drawn, 050 light anneal, and 060 soft anneal that meet ASTM specifications B68 and B75. ESL is...

Read More »
Copper Tubing is offered in exact straight lengths.
Fluid & Gas Flow Equipment

Copper Tubing is offered in exact straight lengths.

Exact Straight Length (ESL) Copper Tube is delivered to HVAC/R OEMs, mechanically straightened and cut to precise and specific lengths for production of heat exchangers, chillers, and heaters. Lengths run from 10 in. to 25 ft. with 3/16-1 in. OD. Tube is available in tempers of H58 drawn, H80 hard drawn, 050 light anneal, and 060 soft anneal that meet ASTM specifications B68 and B75. ESL is...

Read More »
Level Wound Coils meet ASTM specifications.
Materials

Level Wound Coils meet ASTM specifications.

CerroSpec(TM) copper coils are available in drawn, light anneal, and soft anneal tempers. Inner diameter payoff eliminates need for vertical de-reeling equipment, allowing tube to be pulled directly from horizontally stacked coils. Units meet B743, B68, and B75 ASTM specifications and exacting tolerances required by HVAC/R OEM manufacturers.

Read More »
Level Wound Coils meet ASTM specifications.
Materials

Level Wound Coils meet ASTM specifications.

CerroSpec(TM) copper coils are available in drawn, light anneal, and soft anneal tempers. Inner diameter payoff eliminates need for vertical de-reeling equipment, allowing tube to be pulled directly from horizontally stacked coils. Units meet B743, B68, and B75 ASTM specifications and exacting tolerances required by HVAC/R OEM manufacturers.

Read More »
ACR Tubing meets extreme cleanliness requirements.
Fluid & Gas Flow Equipment

ACR Tubing meets extreme cleanliness requirements.

CerroPure(TM) nitrogen charged ACR Tubing meets maximum allowable residue limit of 0.0035 g/sq ft of interior tube surface area, established in both ASTM B280 and ASTM B819. Delivered sealed and pressurized with nitrogen gas, it is available in 10 and 20 ft lengths and 3/8 to 3 1/8 in. dia. Tubing suits applications in air conditioning, refrigeration, and medical gas systems.

Read More »
ACR Tubing meets extreme cleanliness requirements.
Fluid & Gas Flow Equipment

ACR Tubing meets extreme cleanliness requirements.

CerroPure(TM) nitrogen charged ACR Tubing meets maximum allowable residue limit of 0.0035 g/sq ft of interior tube surface area, established in both ASTM B280 and ASTM B819. Delivered sealed and pressurized with nitrogen gas, it is available in 10 and 20 ft lengths and 3/8 to 3 1/8 in. dia. Tubing suits applications in air conditioning, refrigeration, and medical gas systems.

Read More »
Copper Tubes deliver medical-spec cleanliness.
Fluid & Gas Flow Equipment

Copper Tubes deliver medical-spec cleanliness.

OXYMED Tubes are cleaned and capped to prevent contamination of critical medical gas delivery and vacuum systems. Type K and L tubes meet allowable residue limits of 0.0035 g/sq ft of interior tube surface area, and are fitted with plastic caps after cleaning to maintain clean interior surface. Both are corrosion resistant and meet ASTM B819 specfications.

Read More »
Copper Tubes deliver medical-spec cleanliness.
Fluid & Gas Flow Equipment

Copper Tubes deliver medical-spec cleanliness.

OXYMED Tubes are cleaned and capped to prevent contamination of critical medical gas delivery and vacuum systems. Type K and L tubes meet allowable residue limits of 0.0035 g/sq ft of interior tube surface area, and are fitted with plastic caps after cleaning to maintain clean interior surface. Both are corrosion resistant and meet ASTM B819 specfications.

Read More »
Linesets come in more than 1,000 combinations.
Fluid & Gas Flow Equipment

Linesets come in more than 1,000 combinations.

CerroSet(TM) Linesets, available in combinations based on tube diameter, insulation thickness, end finish, and refrigerants, may be used in conjunction with split system air conditioning and heat pumps. Specialty linesets are available for icemakers, split system air conditioning, and chilled water systems. Both come in lengths from 10-60 ft in 5 ft intervals. Standard linesets are purged with...

Read More »
Linesets come in more than 1,000 combinations.
Fluid & Gas Flow Equipment

Linesets come in more than 1,000 combinations.

CerroSet(TM) Linesets, available in combinations based on tube diameter, insulation thickness, end finish, and refrigerants, may be used in conjunction with split system air conditioning and heat pumps. Specialty linesets are available for icemakers, split system air conditioning, and chilled water systems. Both come in lengths from 10-60 ft in 5 ft intervals. Standard linesets are purged with...

Read More »
Copper Tubing is offered in exact straight lengths.
Fluid & Gas Flow Equipment

Copper Tubing is offered in exact straight lengths.

Exact Straight Length (ESL) Copper Tube is delivered to HVAC/R OEMs, mechanically straightened and cut to precise and specific lengths for production of heat exchangers, chillers, and heaters. Lengths run from 10 in. to 25 ft. with 3/16-1 in. OD. Tube is available in tempers of H58 drawn, H80 hard drawn, 050 light anneal, and 060 soft anneal that meet ASTM specifications B68 and B75. ESL is...

Read More »
Copper Tubing is offered in exact straight lengths.
Fluid & Gas Flow Equipment

Copper Tubing is offered in exact straight lengths.

Exact Straight Length (ESL) Copper Tube is delivered to HVAC/R OEMs, mechanically straightened and cut to precise and specific lengths for production of heat exchangers, chillers, and heaters. Lengths run from 10 in. to 25 ft. with 3/16-1 in. OD. Tube is available in tempers of H58 drawn, H80 hard drawn, 050 light anneal, and 060 soft anneal that meet ASTM specifications B68 and B75. ESL is...

Read More »
Level Wound Coils meet ASTM specifications.
Materials

Level Wound Coils meet ASTM specifications.

CerroSpec(TM) copper coils are available in drawn, light anneal, and soft anneal tempers. Inner diameter payoff eliminates need for vertical de-reeling equipment, allowing tube to be pulled directly from horizontally stacked coils. Units meet B743, B68, and B75 ASTM specifications and exacting tolerances required by HVAC/R OEM manufacturers.

Read More »
Level Wound Coils meet ASTM specifications.
Materials

Level Wound Coils meet ASTM specifications.

CerroSpec(TM) copper coils are available in drawn, light anneal, and soft anneal tempers. Inner diameter payoff eliminates need for vertical de-reeling equipment, allowing tube to be pulled directly from horizontally stacked coils. Units meet B743, B68, and B75 ASTM specifications and exacting tolerances required by HVAC/R OEM manufacturers.

Read More »
ACR Tubing meets extreme cleanliness requirements.
Fluid & Gas Flow Equipment

ACR Tubing meets extreme cleanliness requirements.

CerroPure(TM) nitrogen charged ACR Tubing meets maximum allowable residue limit of 0.0035 g/sq ft of interior tube surface area, established in both ASTM B280 and ASTM B819. Delivered sealed and pressurized with nitrogen gas, it is available in 10 and 20 ft lengths and 3/8 to 3 1/8 in. dia. Tubing suits applications in air conditioning, refrigeration, and medical gas systems.

Read More »
ACR Tubing meets extreme cleanliness requirements.
Fluid & Gas Flow Equipment

ACR Tubing meets extreme cleanliness requirements.

CerroPure(TM) nitrogen charged ACR Tubing meets maximum allowable residue limit of 0.0035 g/sq ft of interior tube surface area, established in both ASTM B280 and ASTM B819. Delivered sealed and pressurized with nitrogen gas, it is available in 10 and 20 ft lengths and 3/8 to 3 1/8 in. dia. Tubing suits applications in air conditioning, refrigeration, and medical gas systems.

Read More »
Copper Tubes deliver medical-spec cleanliness.
Fluid & Gas Flow Equipment

Copper Tubes deliver medical-spec cleanliness.

OXYMED Tubes are cleaned and capped to prevent contamination of critical medical gas delivery and vacuum systems. Type K and L tubes meet allowable residue limits of 0.0035 g/sq ft of interior tube surface area, and are fitted with plastic caps after cleaning to maintain clean interior surface. Both are corrosion resistant and meet ASTM B819 specfications.

Read More »
Copper Tubes deliver medical-spec cleanliness.
Fluid & Gas Flow Equipment

Copper Tubes deliver medical-spec cleanliness.

OXYMED Tubes are cleaned and capped to prevent contamination of critical medical gas delivery and vacuum systems. Type K and L tubes meet allowable residue limits of 0.0035 g/sq ft of interior tube surface area, and are fitted with plastic caps after cleaning to maintain clean interior surface. Both are corrosion resistant and meet ASTM B819 specfications.

Read More »

All Topics