Batteryholders Memory Protection Devices
Farmingdale, NY 11735
Share:
Li-Ion Battery Holders accept 18650 rechargeable batteries.
Model BH-18650-W battery holders have stainless steel pressure contacts with 24 AWG wires and 6 in. leads, while BH-18650-PC units have PC tail contact for applications requiring pulse or burst of energy to flow through them. Both accept 3.7 V Li-Ion 18650 batteries with protection circuit module, as well as CR2/3A lithium batteries in series connection for 6 V output. Measuring 78 x 21 x 22 mm,...
Read More »
Enclosed AA Battery Holder has wall-PCB-chassis mounting option.
Made using UL94V-0 rated white polypropylene for case and cover, BK-6089 offers 9 V output with 6 AA alkaline batteries in series and 7.2 V with rechargeable batteries. Sliding cover has one large snap locking tab on front and 2 small tabs at rear, allowing for quick battery changes without use of tools. Holder features temperature range of -30 to +100Ã-
Read More »
Surface Mounting AA Battery Clip features 2 SMD leads.
Model P/N BK-53 uses 2 spring arms to capture and hold AA battery in place. SMD leads help in soldering to pcb, and each lead has solder hole that allows solder paste to wick up to terminal for additional joint strength. Nickel plated clip is constructed of phosphor bronze. Using two spring arms to capture and hold AA battery in place, Model P/N BK-53
Read More »
Battery Holder comes with sliding covers and switch.
Model BK-6049 offers 12 V output with 8 AA alkaline batteries in series or 9.6 V with rechargeable batteries. Rated for 0.5 A, sliding switch in case is recessed below surface to prevent accidental activations. Featuring snap locking tabs, dual sliding covers allow for quick battery changes without use of tools. Unit has operating temperature range between -40Ã-
Read More »
Lithium Vertical Battery Holders suit single board computers.
Designed for CR1632, BR1632, or DL1632 size batteries, Series BV-1632 and BV-1632-G require less than 14 mm in height on top of PCB and measure 19 mm long and 5 mm thick. Coin cell holders snap on to standard 0.062 in. thick PCBs using 3 plastic latches and 4 solder points for stability. Units feature glass filled nylon plastic body, and positive and negative contacts made of phos-bronze with...
Read More »Battery Holder suits oil, industrial, and military uses.
Designed for D-size batteries, BHD-2 offers 0.026 in. thick contacts of nickel-plated stainless steel and built-in reverse battery protection that prevents contact when battery is inserted backwards. PBT body, resistant to chemicals and solvents, is specified for continuous use over -40 to +140Ã-
Read More »
Li-Ion Battery Holders accept 18650 rechargeable batteries.
Model BH-18650-W battery holders have stainless steel pressure contacts with 24 AWG wires and 6 in. leads, while BH-18650-PC units have PC tail contact for applications requiring pulse or burst of energy to flow through them. Both accept 3.7 V Li-Ion 18650 batteries with protection circuit module, as well as CR2/3A lithium batteries in series connection for 6 V output. Measuring 78 x 21 x 22 mm,...
Read More »
Enclosed AA Battery Holder has wall-PCB-chassis mounting option.
Made using UL94V-0 rated white polypropylene for case and cover, BK-6089 offers 9 V output with 6 AA alkaline batteries in series and 7.2 V with rechargeable batteries. Sliding cover has one large snap locking tab on front and 2 small tabs at rear, allowing for quick battery changes without use of tools. Holder features temperature range of -30 to +100Ã-
Read More »
Surface Mounting AA Battery Clip features 2 SMD leads.
Model P/N BK-53 uses 2 spring arms to capture and hold AA battery in place. SMD leads help in soldering to pcb, and each lead has solder hole that allows solder paste to wick up to terminal for additional joint strength. Nickel plated clip is constructed of phosphor bronze. Using two spring arms to capture and hold AA battery in place, Model P/N BK-53
Read More »
Battery Holder comes with sliding covers and switch.
Model BK-6049 offers 12 V output with 8 AA alkaline batteries in series or 9.6 V with rechargeable batteries. Rated for 0.5 A, sliding switch in case is recessed below surface to prevent accidental activations. Featuring snap locking tabs, dual sliding covers allow for quick battery changes without use of tools. Unit has operating temperature range between -40Ã-
Read More »
Lithium Vertical Battery Holders suit single board computers.
Designed for CR1632, BR1632, or DL1632 size batteries, Series BV-1632 and BV-1632-G require less than 14 mm in height on top of PCB and measure 19 mm long and 5 mm thick. Coin cell holders snap on to standard 0.062 in. thick PCBs using 3 plastic latches and 4 solder points for stability. Units feature glass filled nylon plastic body, and positive and negative contacts made of phos-bronze with...
Read More »Battery Holder suits oil, industrial, and military uses.
Designed for D-size batteries, BHD-2 offers 0.026 in. thick contacts of nickel-plated stainless steel and built-in reverse battery protection that prevents contact when battery is inserted backwards. PBT body, resistant to chemicals and solvents, is specified for continuous use over -40 to +140Ã-
Read More »