Detector Electronics Corp.

Flame and Gas Detectors utilize DTM software.
Sensors, Monitors & Transducers

Flame and Gas Detectors utilize DTM software.

Available for gas and flame detectors, FDT/DTM standardizes communications and configuration interface between industrial field devices and host systems being utilized at facility. With FDT/DTM, any field device can be configured, operated, and maintained through standardized user interface, regardless of supplier, type, or communication protocol. Documentation, log extraction, fault diagnostics,...

Read More »
Det-Tronics Adds IP66/67 Approval to Existing Ultra-Fast Hydrogen Sulfide Gas Detector Detector Approved for Class I, Div 1 Locations Including Locations That Require IP66/67
Sensors, Monitors & Transducers

Det-Tronics Adds IP66/67 Approval to Existing Ultra-Fast Hydrogen Sulfide Gas Detector Detector Approved for Class I, Div 1 Locations Including Locations That Require IP66/67

Minneapolis, MN, - Detector Electronics Corporation (Det-Tronics), a world leader in industrial fire detection, gas detection, and hazard mitigation systems, announces that its Nanotechnology Metal Oxide Semiconductor hydrogen sulfide gas (NTMOS H2S) detector has earned approval for use in locations that require an ingress protection rating of IP66/67, ideal for petrochemical, oil and gas...

Read More »
Toxic Gas Detectors are IP66 rated for harsh environments.
Sensors, Monitors & Transducers

Toxic Gas Detectors are IP66 rated for harsh environments.

Consisting of transmitter (GTX) and sensor module (GTS), GT3000 family electrochemical fixed-point detectors provide non-intrusive calibration and ability to swap sensors without de-classifying hazardous areas. Transmitter generates 4-20 mA output signal with HART that is proportional to concentration of target gas and corresponds directly to 0-100% full scale. Sensors are available to detect...

Read More »
Safety Surveillance System works automatically.
Optics & Photonics

Safety Surveillance System works automatically.

With Class I, Div. 1 and NEMA 4X approvals from FM, CSA, CE, and ATEX, xWatch® camera and surveillance system automatically detects and records safety incidents for remote or local viewing. System enables immediate viewing of industrial hazards remotely via configurable IP address, and record and review incidents for event analysis. Flame detector with camera views same expanse, and...

Read More »
Display provides non-instrusive gas detector calibration.
Sensors, Monitors & Transducers

Display provides non-instrusive gas detector calibration.

Designed to operate with wide range of toxic and combustible gas sensors, FlexVu(TM) Model UD10 Universal Display provides local event logging and 3rd party performance certifications. Outputs include analog 4-20 mA with HART, 3 alarm relays, 1 fault relay, and RS-485 Modbus. With FlexVu, single person can calibrate gas detectors without declassifying hazardous area. Unit has explosion-proof...

Read More »
Sensors, Monitors & Transducers

NTMOS Hydrogen Sulfide Gas Sensor is ISA-92.0.01 tested.

Using nanotechnology in Metal Oxide Semiconductor (MOS) sensor, NTMOS H2S gas sensor detects low H2S gas concentrations in 5 sec or less while tolerating harsh environments that include extreme temperature and/or humidity conditions. Packaged in rugged housing, protected by sintered stainless steel flame arrestor, sensor can be installed in Class I, Div 1 locations either as standalone or...

Read More »
Sensors, Monitors & Transducers

Methane Gas Detector is MSHA-approved.

Mining IR fixed methane gas detector uses IR light beam to detect and measure methane gas concentration, while continuously performing self checks so there are no unrevealed failures. Prefitted with MSHA-approved cable glands, it has modular design with field-replaceable optics-protection filters. Display module provides digital LCD readout indicating 0-5% by volume detected gas concentration and...

Read More »

Fire and Gas Detection System is SIL-2 safety-certified.

Certified for applications to Safety Integrity Level 2 (SIL-2), X3301 multi-spectrum IR flame detector and PIRECL Eclipse IR combustible gas detector, together with Eagle Quantum Premier (EQP) controller and Enhanced Discrete Input/Output (EDIO) module, are components that form SIL 2 capable system. SIL-2 EQP system provides single solution that fulfills needs of Safety Instrumented System and...

Read More »
Controls & Controllers

Video Surveillance System works with flame detectors.

Offering high-resolution monitoring from within X-Series flame detectors, xWatch(TM) is suited for use in remote or hard-to-access areas. Both devices view same 90° cone of vision, and, when fire is detected, real-time video provides operator with ability to accurately assess risk and location of fire in monitored area to initiate appropriate response. Product also can operate as...

Read More »
Flame and Gas Detectors utilize DTM software.
Sensors, Monitors & Transducers

Flame and Gas Detectors utilize DTM software.

Available for gas and flame detectors, FDT/DTM standardizes communications and configuration interface between industrial field devices and host systems being utilized at facility. With FDT/DTM, any field device can be configured, operated, and maintained through standardized user interface, regardless of supplier, type, or communication protocol. Documentation, log extraction, fault diagnostics,...

Read More »
Det-Tronics Adds IP66/67 Approval to Existing Ultra-Fast Hydrogen Sulfide Gas Detector Detector Approved for Class I, Div 1 Locations Including Locations That Require IP66/67
Sensors, Monitors & Transducers

Det-Tronics Adds IP66/67 Approval to Existing Ultra-Fast Hydrogen Sulfide Gas Detector Detector Approved for Class I, Div 1 Locations Including Locations That Require IP66/67

Minneapolis, MN, - Detector Electronics Corporation (Det-Tronics), a world leader in industrial fire detection, gas detection, and hazard mitigation systems, announces that its Nanotechnology Metal Oxide Semiconductor hydrogen sulfide gas (NTMOS H2S) detector has earned approval for use in locations that require an ingress protection rating of IP66/67, ideal for petrochemical, oil and gas...

Read More »
Toxic Gas Detectors are IP66 rated for harsh environments.
Sensors, Monitors & Transducers

Toxic Gas Detectors are IP66 rated for harsh environments.

Consisting of transmitter (GTX) and sensor module (GTS), GT3000 family electrochemical fixed-point detectors provide non-intrusive calibration and ability to swap sensors without de-classifying hazardous areas. Transmitter generates 4-20 mA output signal with HART that is proportional to concentration of target gas and corresponds directly to 0-100% full scale. Sensors are available to detect...

Read More »
Safety Surveillance System works automatically.
Optics & Photonics

Safety Surveillance System works automatically.

With Class I, Div. 1 and NEMA 4X approvals from FM, CSA, CE, and ATEX, xWatch® camera and surveillance system automatically detects and records safety incidents for remote or local viewing. System enables immediate viewing of industrial hazards remotely via configurable IP address, and record and review incidents for event analysis. Flame detector with camera views same expanse, and...

Read More »
Display provides non-instrusive gas detector calibration.
Sensors, Monitors & Transducers

Display provides non-instrusive gas detector calibration.

Designed to operate with wide range of toxic and combustible gas sensors, FlexVu(TM) Model UD10 Universal Display provides local event logging and 3rd party performance certifications. Outputs include analog 4-20 mA with HART, 3 alarm relays, 1 fault relay, and RS-485 Modbus. With FlexVu, single person can calibrate gas detectors without declassifying hazardous area. Unit has explosion-proof...

Read More »
Sensors, Monitors & Transducers

NTMOS Hydrogen Sulfide Gas Sensor is ISA-92.0.01 tested.

Using nanotechnology in Metal Oxide Semiconductor (MOS) sensor, NTMOS H2S gas sensor detects low H2S gas concentrations in 5 sec or less while tolerating harsh environments that include extreme temperature and/or humidity conditions. Packaged in rugged housing, protected by sintered stainless steel flame arrestor, sensor can be installed in Class I, Div 1 locations either as standalone or...

Read More »
Sensors, Monitors & Transducers

Methane Gas Detector is MSHA-approved.

Mining IR fixed methane gas detector uses IR light beam to detect and measure methane gas concentration, while continuously performing self checks so there are no unrevealed failures. Prefitted with MSHA-approved cable glands, it has modular design with field-replaceable optics-protection filters. Display module provides digital LCD readout indicating 0-5% by volume detected gas concentration and...

Read More »

Fire and Gas Detection System is SIL-2 safety-certified.

Certified for applications to Safety Integrity Level 2 (SIL-2), X3301 multi-spectrum IR flame detector and PIRECL Eclipse IR combustible gas detector, together with Eagle Quantum Premier (EQP) controller and Enhanced Discrete Input/Output (EDIO) module, are components that form SIL 2 capable system. SIL-2 EQP system provides single solution that fulfills needs of Safety Instrumented System and...

Read More »
Controls & Controllers

Video Surveillance System works with flame detectors.

Offering high-resolution monitoring from within X-Series flame detectors, xWatch(TM) is suited for use in remote or hard-to-access areas. Both devices view same 90° cone of vision, and, when fire is detected, real-time video provides operator with ability to accurately assess risk and location of fire in monitored area to initiate appropriate response. Product also can operate as...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers