Company News

SMAC Moving Coil Actuators

5807 Van Allen Wy., Carlsbad, CA, 92008, USA

  • 760-929-7575

Latest New Product News from
SMAC Moving Coil Actuators

Mechanical Power Transmission

SMAC Moving Coil Actuators are IP 67 rated.

Dec 28, 2017

SMAC Moving Coil Actuators are available in LAL95 and LCA50 series. Units are suitable for food- and beverage-handling equipment applications and are dust-proof and water-proof. LAL95 offers peak force of 195N and maximum stroke of 50mm whereas LCA50 provides force up to 110N and stroke of 50mm.

Read More

Mechanical Power Transmission

LCA6 Moving Coil Motor comes with built-in sensor feedback system.

Nov 01, 2017

SMAC’s LCA6 Moving Coil Motor offers linear stroke of 5-30 mm with encoder resolution of 0.1-5 micron. Having coil resistance of 18.9 Ω and peak force of 5N at 1.5 A, unit provides programmable position, force and velocity. Motors come with flat coils that are centered between cross rollers in order to reduce deflection load. LCA6 is used in electronic pick-and-place, biomedical... Read More

Graphic User Interface comes in save and load configurations.

Nov 01, 2017

Graphic User Interface enables user to configure and run thread check applications which use SMAC hardware. Unit offers separate tabs for runtime use, setup and tuning functions. Interface features hyper terminal functionality and real time plot of rotary error versus position. Product offers handshake interface using digital I/O with a host controller.

Read More

Material Handling & Storage

MGR5 Series Micro Gripper weighs 30 grams.

Jun 16, 2017

Designed for handling fragile parts, MGR5 Series Micro Gripper offers stroke of 10 mm, Measuring 30 mm x 47 mm x 19.5 mm dimensions, unit delivers for of 1.7 N at 1.5 Amp. Integrated with built-in sensor feedback system, product comes with programmable speeds, positions and forces with data feedback. Featuring rotary encoders, micro gripper is suitable for positioning, measuring and inspection... Read More

Mechanical Components and Assemblies

Electric Cylinder addresses packaging industry demands.

Nov 11, 2014

With carriage-free designs and built-in linear bearings, fully programmable CBL50 offers life of over 100 million cycles, achieves 50 N peak force while consuming 2 A, and delivers up to 40 G acceleration. Vacuum and spring option is available for pick and place applications, and IP65 and IP67 dustproof and waterproof options are also available. Stroke lengths include 10, 25, 50, and 100 mm, and... Read More

Mechanical Components and Assemblies

Electric Cylinders with Controller can replace pneumatics.

Oct 14, 2014

Featuring built-in controller, CBL35C Series enables direct replacement of air cylinders or ball-screw drive actuators, making it suitable for machines already in production that do not have locations allocated for separate controllers. Electric cylinders can control force, speed, and velocity profile. Since no compressed air is needed, there is no air contamination in cleanroom applications.... Read More

Material Handling & Storage, Mechanical Power Transmission

Linear Slide Actuator suits precision movement applications.

Jul 02, 2014

Featuring 40 x 60 x 25 mm profile and 10 mm stroke length, SLA25 Series incorporates precision cross roller guides with anti-creep protection. Moving coil drive is centered between cross rollers, eliminating moment effects from drive. Available with encoder resolution down to 50 nm, actuator is fully programmable permitting users to exert complete control over force, acceleration, and velocity.... Read More

Mechanical Components and Assemblies

Electric Cylinders offer 50 G acceleration, 2,000+ CPM operation.

Jan 27, 2014

With life expectancy of 100+ million cycles, CBL series features carriage-free design and built-in linear bearings (including SMAC lube rings). Snap Together design controls tight tolerance stack-up and ensures product quality, while electrical interface facilitates stroke adjustment. Free and independent control is available for velocity, position, and force simultaneously, and 100% data... Read More

Mechanical Power Transmission

Servo Linear Actuator suits pick and place applications.

Jan 25, 2013

Measuring 50 x 95 x 8 mm for 10 mm stroke, LCA8 Series is designed to replace pneumatic cylinders. Unit offers stroke range up to 50 mm, peak force of 5 N at 3 A, and acceleration up to >20 G. Providing independent control of position, speed, and force, actuator features standard encoder resolution of 5 microns, with 1 or 0.1 micron available as options. Direct drive actuator, available with... Read More

Mechanical Power Transmission

Moving Coil Actuator exhibits extended cycle life.

Apr 16, 2010

Designed to replace pneumatic cylinders in positioning/measuring applications, LCA series includes 1- and 3-coil versions which respectively generate 10 and 30 N and offer accelerations exceeding 40G. Model LCA25 occupies 25 x 50 mm footprint, and length depends on stroke, which can vary from 10-100 mm with encoder resolutions from 20 micron to 50 nm. Slide option is available for scanning... Read More

Mechanical Power Transmission

Linear and Rotary Electric Actuator facilitates PCB assembly.

Aug 25, 2009

Measuring 140 x 77.25 x 35 mm with stroke length of 30 mm or 180 x 77.25 x 35 mm with 50 mm stroke length, LAR31 Series features vacuum built in shaft through rotary motor, which assures that external objects are ejected through other end, preventing dust build-up in unit. Standard encoder resolution is 5 µm, with options of 1, 0.5, and 0.1 µm. Backlash-free unit can be programmed to control... Read More

Mechanical Components and Assemblies, Mechanical Power Transmission

Electric Cylinders target high-speed CAM indexers.

May 13, 2009

Featuring 36 mm dia and stroke lengths of 15, 25, and 50 mm, CAL36 cylinders are designed with round-centered coil and guide. Units can achieve up to 50 G acceleration and offer independent control of position, speed, and force. Soft-Land capability allows actuators to land on parts gently and then apply required forces. Able to work and simultaneously provide feedback, they are offered in... Read More

Mechanical Components and Assemblies, Mechanical Power Transmission

Programmable Electric Cylinder measures 12 mm in diameter.

Oct 03, 2008

Featuring stroke length of 10 mm, CAL12 series electric actuators deliver precise, repeatable force control and positioning. Cylinder acceleration up to 10 G can be achieved, and life expectancy is rate at over 100-million cycles min. Manufactured from stainless steel with minimum wall thickness of 1.5 mm, actuators are based on SMAC moving coil actuator technology and offered with force ranges... Read More

Other Company News from
SMAC Moving Coil Actuators