Electro Standards Laboratories

Electro Standards Includes Specialty Fiber Cables and MIL Spec Cables in Its Expanding Custom Network Cable Line
Construction Equipment and Supplies

Electro Standards Includes Specialty Fiber Cables and MIL Spec Cables in Its Expanding Custom Network Cable Line

Electro Standards Laboratories, Cranston, RI, announces the addition of MTP®/MPO 12-fiber fan-out cables, a high-density fiber MTP commercial conversion kit for M28876 military fiber system and circular MIL connector cable assemblies to its custom cable product line. The MTP®/MPO 12-fiber fan-out cables are offered in 62.5/125 micron multimode Simplex and Duplex in any lengths....

Read More »
Six-Channel RJ45 A/B Switch requires no power.
Electrical Equipment & Systems

Six-Channel RJ45 A/B Switch requires no power.

Offering six Primary Rate Interface (PRI) input channels, Model 9456 network switch allows users to manually switch all six PRI channels simultaneously between A and B positions via one knob located on front of unit. It utilizes sealed switch mechanism with self-wiping contacts and features rugged all-aluminum 1U rackmount enclosure. All 18 RJ45 Female ports are located on rear of unit with 4...

Read More »
DAQ Board targets high speed embedded applications.
Architectural & Civil Engineering Products

DAQ Board targets high speed embedded applications.

CellMite® ProD features dual 24-bit independent strain gage channels with simultaneous sampling at 15 K samples/sec, and 12 additional 12-bit analog input channels with throughput of 1 M samples/sec. Supporting direct PC or network communication via USB, RS232, RS485, and Ethernet data channels, board offers 16-bit analog output channels with user specified scaling and offset, with range of...

Read More »
A/B/Off-Line Switch employs mirror technology.
Communication Systems & Equipment

A/B/Off-Line Switch employs mirror technology.

QuickSwitch® Model 6259 16-Channel fiber optic ST Simplex A/B/off-line switch allows devices connected to Common port of each channel to access A or B port of each channel. Enclosed in standard 2U rackmount casing, unit goes off-line on power loss and stops passing data. It can be controlled locally by using front panel pushbuttons; there is no remote control for this unit. A, B, and Common...

Read More »
Secure Switching System is suited for video conference rooms.
Communication Systems & Equipment

Secure Switching System is suited for video conference rooms.

Rackmount Switching System facilitates passing connection of voice/data lines, both copper and fiber media, from designated set of equipment to existing building network, or disconnects them from building network, isolating all equipment in designated room or area. It comprises of Secure/NonSecure indicator unit, and data pass/off-line switches including fiber optic SC, 16-channel Ethernet,...

Read More »
A/B Switch allows sharing of DB25/X.21 BIS interface devices.
Communication Systems & Equipment

A/B Switch allows sharing of DB25/X.21 BIS interface devices.

Manually controlled by front panel pushbutton or remotely via DB9 connector accepting RS232 serial data, PathWay® Model 7231 enables sharing of DB25/X.21 BIS Interface device between 2 other X.21 devices. Two-position device allows user to issue remote ASCII commands to set pushbutton-position change delay value, which is amount of time operator must hold down pushbutton before acutal...

Read More »
Interface Converter suits RS485 multi-point applications.
Electrical Equipment & Systems

Interface Converter suits RS485 multi-point applications.

ST fiber-to-multi-point RS485/422/232 interface converter Model 4152/4153 has typical operating speeds up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. It features 3 kVdc isolation to prevent system ground loops, and ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit is available in compact...

Read More »
Electro Standards Laboratories Announces New Products Designed for Casino VLT Networks
Controls & Controllers

Electro Standards Laboratories Announces New Products Designed for Casino VLT Networks

Electro Standards Laboratories (ESL), Cranston, RI, has just announced its new family of products designed for Casino VLT Networks. The four models of HP Fiber to RS-232 and RS-485 converters allow connection of HP Fiber Optic Linked Terminals to the RS-232 and RS-485 ports of controllers. The Model 4154 HP Fiber Repeater with RS-232 Traffic Monitor Port is used to regenerate data signals in...

Read More »
Built to Last with Compact, Rugged Aluminum Case, Model 800 HSSI (SCSI-2) Breakout Box Has 50 Pins to Access Interface Signals!
Electrical Equipment & Systems

Built to Last with Compact, Rugged Aluminum Case, Model 800 HSSI (SCSI-2) Breakout Box Has 50 Pins to Access Interface Signals!

Electro Standards Laboratories (ESL), Cranston, RI, announces Model 800 (HSSI) High Speed Serial Interface (SCSI-2) Breakout Box that allows users to access and monitor any of the signals that pass through the unit uninterrupted via test point pins. Fifty pins on the front panel allow access to all interface signals. Built to last, the Model 800 has a compact, rugged aluminum case that is...

Read More »
Interface Converter converts data at up to 921,600 bps.
Electrical Equipment & Systems

Interface Converter converts data at up to 921,600 bps.

Model 4163/4164 Ethernet-to-RS485/422/232 interface converter converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from standard LAN/WAN connection to serial asynchronous data interface over RS232 or RS485/422 networks. Featuring ESD protection circuitry, RoHS compliant product suits application in building automation, industrial manufacturing, and utilities. Converter allows remote monitoring...

Read More »

All Topics