Extrutech Plastics, Inc.

Manitowoc, WI 54220
EXTRUTECH PLASTICS, INC. Announces the Certification by ICC-ES of Extrutech Concrete Wall Forms for Housing and Commercial Buildings in the United States and Canada.
Manitowoc, WI, March 26, 2020 – Extrutech Plastics Concrete Forms have been approved and certified by ICC-ES for building construction in the USA and Canada. Extrutech has been producing concrete Forms since 2013 and has successfully completed hundreds of beautiful facilities throughout America and Canada. Extrutech produces these patented, Stay-in-Place Forms for both residential basement...
Read More »
Extrutech Plastics Inc. Announces The Production of Basement Wall Forms for Housing.
Manitowoc, WI, March 12, 2020 – Extrutech Plastics Inc. has begun production of the patented stay-in-place forms for residential basement walls. The Extrutech Forms are water proof, corrosion proof and will not rot or discolor. These forms are not affected by rodents or termites and are insect proof. These basement wall forms will not support mold or mildew and are perfect for high moisture,...
Read More »
Extrutech Plastics, Inc. Announces the Production of Plastic / Concrete Housing
Manitowoc, WI, May 1, 2018 – Extrutech Plastics Inc. has begun the production of small and medium size houses for the use in the areas that are hit by hurricanes and severe storms every year. These houses are built using the patented Extrutech Form System. These forms are either 6” or 8” thick and 24” wide. They snap and lock together with an E-Spline Locking System. During assembly they...
Read More »
Form Systems and Wall Panel offer sanitary surfaces.
Suitable for sanitizing on daily basis, added products include EFS-8 Extrutech Form System for 8, 10, and 12 in.- concrete walls; EFSI-8 Extrutech Form System for Insulated concrete walls; P224 Wall Panel for interior partition walls and clean rooms; and P645 Angle Form Connector for construction of concrete circular and oval storage tanks or above/below ground swimming pools. Waterproof...
Read More »
Concrete Plastic Wall Forms feature stay-in-place design.
Measuring 24 in. wide x 6 in. thick, Extrutech FORM System snaps together with double-spline, E-Locking System. Forms can be insulated with 2 in. of foam board for R-14, and brick or stone masonry may be added to exterior to optimize building appearance. Featuring high gloss, non-porous surface that resists damage,- waterproof concrete forms will never rust, rot, corrode, or discolor and are...
Read More »
Stay-in-Place Concrete Form creates 6 in. poured walls.
Offering easy-to-clean sanitary surface on both sides, FORM System creates structural wall system that is builder and customer friendly, and is suited for use in dairy, car wash, and food facilities. System consists of 24 x 6 in. panel that is pre-cut to project specifications and snaps together with double-spline E-Locking System.
Read More »Suspended Ceiling is Class A rated.
Consisting of fiberglass grid support structure and Extrutech P2400 plastic panel, Suspended Ceiling System is Class A rated for fire and smoke, and grid is seismic approved by ICC. It can be configured with standard 24 in. wide panels, made up to 12 ft long. Components are water and corrosion proof and will not rot, rust, or flake. Highly reflective ceiling system is suited for food processing...
Read More »Extrutech Panels Brighten Car Washes To Attract Upscale Customers
Manitowoc, Wisc. (August 18, 2008) According to market research by The Conference Board , over the next several years, households with earnings of at least $100,000 will be one of the fastest growing segments of the U.S. population. Greg Sheehy says, grasp the opportunity. This fast-growing, wealthy demographic drives nice cars and don't often wash them in their driveways. They use car washes....
Read More »Extrutech Poly Board Panels On Walls And Ceilings Improve Sanitary Conditions
Manitowoc, Wisc. (August 18, 2008) Today's sanitary regulations aren't getting any easier. Food processing plant owners, however, can give their plants that clean, sanitary appearance with plastic wall and ceiling liner panels. Extrutech Plastics, Inc. provides PVC products for the interior walls and ceilings for today's progressive processing plants. Greg Sheehy, President of Operations,...
Read More »EXTRUTECH PLASTICS, INC. Announces that Extrutech Concrete Forms and Panels are now Certified by ICC-ES & IBC
Manitowoc, WI, July 1, 2020 – Extrutech Plastics, the leader in wall and ceiling panels, has introduced a new, patented EFS-P824-8” concrete wall form panel that is now certified by ICC-ES under report number ESR-4250. This concrete form is stronger and tougher than any of the competitor’s products, yet snap together easily to form a straight, flat wall; perfect for your new car wash, dairy...
Read More »EXTRUTECH PLASTICS, INC. Announces the Certification by ICC-ES of Extrutech Concrete Wall Forms for Housing and Commercial Buildings in the United States and Canada.
Manitowoc, WI, March 26, 2020 – Extrutech Plastics Concrete Forms have been approved and certified by ICC-ES for building construction in the USA and Canada. Extrutech has been producing concrete Forms since 2013 and has successfully completed hundreds of beautiful facilities throughout America and Canada. Extrutech produces these patented, Stay-in-Place Forms for both residential basement...
Read More »
Extrutech Plastics Inc. Announces The Production of Basement Wall Forms for Housing.
Manitowoc, WI, March 12, 2020 – Extrutech Plastics Inc. has begun production of the patented stay-in-place forms for residential basement walls. The Extrutech Forms are water proof, corrosion proof and will not rot or discolor. These forms are not affected by rodents or termites and are insect proof. These basement wall forms will not support mold or mildew and are perfect for high moisture,...
Read More »
Extrutech Plastics, Inc. Announces the Production of Plastic / Concrete Housing
Manitowoc, WI, May 1, 2018 – Extrutech Plastics Inc. has begun the production of small and medium size houses for the use in the areas that are hit by hurricanes and severe storms every year. These houses are built using the patented Extrutech Form System. These forms are either 6” or 8” thick and 24” wide. They snap and lock together with an E-Spline Locking System. During assembly they...
Read More »
Form Systems and Wall Panel offer sanitary surfaces.
Suitable for sanitizing on daily basis, added products include EFS-8 Extrutech Form System for 8, 10, and 12 in.- concrete walls; EFSI-8 Extrutech Form System for Insulated concrete walls; P224 Wall Panel for interior partition walls and clean rooms; and P645 Angle Form Connector for construction of concrete circular and oval storage tanks or above/below ground swimming pools. Waterproof...
Read More »
Concrete Plastic Wall Forms feature stay-in-place design.
Measuring 24 in. wide x 6 in. thick, Extrutech FORM System snaps together with double-spline, E-Locking System. Forms can be insulated with 2 in. of foam board for R-14, and brick or stone masonry may be added to exterior to optimize building appearance. Featuring high gloss, non-porous surface that resists damage,- waterproof concrete forms will never rust, rot, corrode, or discolor and are...
Read More »
Stay-in-Place Concrete Form creates 6 in. poured walls.
Offering easy-to-clean sanitary surface on both sides, FORM System creates structural wall system that is builder and customer friendly, and is suited for use in dairy, car wash, and food facilities. System consists of 24 x 6 in. panel that is pre-cut to project specifications and snaps together with double-spline E-Locking System.
Read More »Extrutech Plastics Inc. Announces Today That They Will Exhibit at the Open Barn Event at the Dejno Acres Family Farm on March 31st, 2012
Extrutech Plastics Inc. Announces Today That They Will Exhibit at the Open Barn Event at the Dejno Acres Family Farm on March 31st, 2012. MANITOWOC, WI., MARCH 8, 2012 - Extrutech Plastics, Inc., Brickl Bros. of West Salem, WI., and Al's Concrete Products of La Crescent, MN are happy to announce today that they will be among the sponsors of the Dejno Acres Open Barn located at W24018 Swede Valley...
Read More »Extrutech Plastics, Inc. Announces that it has Been Certified as ISO 9001-2008 QMS Compliant.
MANITOWOC, WI, June 21, 2010 - Extrutech Plastics, Inc., a custom plastic extruder, was Certified By Verisys Registrars, LLC of Brookfield, WI as ISO 9001-2008 Quality Management System compliant. Extrutech received its certification for ISO 9001:2000 compliance in January, 2009, and during the current recertification process the clarifications implemented in ISO 9001-2008 were incorporated. ISO...
Read More »Suspended Ceiling is Class A rated.
Consisting of fiberglass grid support structure and Extrutech P2400 plastic panel, Suspended Ceiling System is Class A rated for fire and smoke, and grid is seismic approved by ICC. It can be configured with standard 24 in. wide panels, made up to 12 ft long. Components are water and corrosion proof and will not rot, rust, or flake. Highly reflective ceiling system is suited for food processing...
Read More »