General Plastics Manufacturing Company

New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts
Architectural & Civil Engineering Products

New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts

Enables aerospace, automotive and composites-manufacturing companies the ability to manufacture tools and parts for prototypes, concept proofs, short-run production parts and other applications. CTE is similar to aluminum that provides alternative tooling system that is cost-effective, dimensionally predictable and stable.

Read More »
New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts
Architectural & Civil Engineering Products

New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts

Enables aerospace, automotive and composites-manufacturing companies the ability to manufacture tools and parts for prototypes, concept proofs, short-run production parts and other applications. CTE is similar to aluminum that provides alternative tooling system that is cost-effective, dimensionally predictable and stable.

Read More »
Materials

General Plastics to Highlight FR-3800 FST Aerospace Foam Core Series at Aircraft Interiors Expo Americas, Nov 4-5, 2015

Leading high-density polyurethane foam supplier also featuring its FAA-certified testing and build-to-print capabilities TACOMA, Wash. - General Plastics Manufacturing Company will be at the largest dedicated aircraft interiors event in the Americas on November 4-5 at the Washington State Convention Center in Seattle, Booth 418. The longtime supplier to aerospace OEMs and Tier 1 and Tier 2...

Read More »
Materials

General Plastics to Highlight FR-3800 FST Aerospace Foam Core Series at Aircraft Interiors Expo Americas, Nov 4-5, 2015

Leading high-density polyurethane foam supplier also featuring its FAA-certified testing and build-to-print capabilities TACOMA, Wash. - General Plastics Manufacturing Company will be at the largest dedicated aircraft interiors event in the Americas on November 4-5 at the Washington State Convention Center in Seattle, Booth 418. The longtime supplier to aerospace OEMs and Tier 1 and Tier 2...

Read More »
Materials

Microcell Foam Boards support fine detail work.

Featuring uniform, ultra-smooth design, LAST-A-FOAM-® FR-4600 Microcell prototype and modeling foam boards cut crisply and support fine detail work, satisfying needs of boat makers. In lower densities, products are suitable for hand-carved models, prototypes, and decorative fixtures. Higher densities are easily milled by machine to create intricate tooling. Tight microcell texture creates...

Read More »
Materials

Foam/Tooling Boards and Material promote engineering flexibility.

Leading high-density polyurethane supplier to OEMs also spotlighting its high-temperature tooling boards and testing capabilities TACOMA, Wash. – General Plastics Manufacturing Company will introduce its advanced FR-4600 Microcell Foam Series for detailed definition at the largest dedicated aircraft interiors event in the Americas. Taking place October 14-16 at the Washington State Convention...

Read More »
Materials

Microcell Foam Boards support fine detail work.

Featuring uniform, ultra-smooth design, LAST-A-FOAMÂ-® FR-4600 Microcell prototype and modeling foam boards cut crisply and support fine detail work, satisfying needs of boat makers. In lower densities, products are suitable for hand-carved models, prototypes, and decorative fixtures. Higher densities are easily milled by machine to create intricate tooling. Tight microcell texture creates...

Read More »
Materials

Foam/Tooling Boards and Material promote engineering flexibility.

Leading high-density polyurethane supplier to OEMs also spotlighting its high-temperature tooling boards and testing capabilities TACOMA, Wash. – General Plastics Manufacturing Company will introduce its advanced FR-4600 Microcell Foam Series for detailed definition at the largest dedicated aircraft interiors event in the Americas. Taking place October 14-16 at the Washington State Convention...

Read More »
Company News

General Plastics Manufacturing Company Receives Supplier of the Year Award from Boeing

Tacoma, WASH. (PRWeb) May 20, 2019 General Plastics Manufacturing Co., supplier of high-performance polyurethane foam products and built-to-print composite parts, was recognized by The Boeing Company as Supplier of the Year in the Outstanding Performance category. General Plastics was one of 13 companies honored on May 8, 2019, for its commitment to distinguished performance in working with...

Read More »
Company News

General Plastics Manufacturing Company Receives Supplier of the Year Award from Boeing

Tacoma, WASH. (PRWeb) May 20, 2019 General Plastics Manufacturing Co., supplier of high-performance polyurethane foam products and built-to-print composite parts, was recognized by The Boeing Company as Supplier of the Year in the Outstanding Performance category. General Plastics was one of 13 companies honored on May 8, 2019, for its commitment to distinguished performance in working with...

Read More »
New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts
Architectural & Civil Engineering Products

New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts

Enables aerospace, automotive and composites-manufacturing companies the ability to manufacture tools and parts for prototypes, concept proofs, short-run production parts and other applications. CTE is similar to aluminum that provides alternative tooling system that is cost-effective, dimensionally predictable and stable.

Read More »
New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts
Architectural & Civil Engineering Products

New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts

Enables aerospace, automotive and composites-manufacturing companies the ability to manufacture tools and parts for prototypes, concept proofs, short-run production parts and other applications. CTE is similar to aluminum that provides alternative tooling system that is cost-effective, dimensionally predictable and stable.

Read More »
Materials

General Plastics to Highlight FR-3800 FST Aerospace Foam Core Series at Aircraft Interiors Expo Americas, Nov 4-5, 2015

Leading high-density polyurethane foam supplier also featuring its FAA-certified testing and build-to-print capabilities TACOMA, Wash. - General Plastics Manufacturing Company will be at the largest dedicated aircraft interiors event in the Americas on November 4-5 at the Washington State Convention Center in Seattle, Booth 418. The longtime supplier to aerospace OEMs and Tier 1 and Tier 2...

Read More »
Materials

General Plastics to Highlight FR-3800 FST Aerospace Foam Core Series at Aircraft Interiors Expo Americas, Nov 4-5, 2015

Leading high-density polyurethane foam supplier also featuring its FAA-certified testing and build-to-print capabilities TACOMA, Wash. - General Plastics Manufacturing Company will be at the largest dedicated aircraft interiors event in the Americas on November 4-5 at the Washington State Convention Center in Seattle, Booth 418. The longtime supplier to aerospace OEMs and Tier 1 and Tier 2...

Read More »
Company News

General Plastics to Attend SAMPE Baltimore 2015 Conference at the Baltimore Convention Center

High-density polyurethane supplier to OEMs will exhibit products from LAST-A-FOAM-® series TACOMA, Wash. – General Plastics Manufacturing Company will attend this year’s SAMPE Baltimore 2015 conference and exhibition to showcase products from the LAST-A-FOAM® rigid foam series and flexible foam parts at Booth B37. General Plastics, certified to ISO 9001:2008/AS9100C, offers foam parts and...

Read More »
Company News

General Plastics to Attend SAMPE Baltimore 2015 Conference at the Baltimore Convention Center

High-density polyurethane supplier to OEMs will exhibit products from LAST-A-FOAMÂ-® series TACOMA, Wash. – General Plastics Manufacturing Company will attend this year’s SAMPE Baltimore 2015 conference and exhibition to showcase products from the LAST-A-FOAM® rigid foam series and flexible foam parts at Booth B37. General Plastics, certified to ISO 9001:2008/AS9100C, offers foam...

Read More »

All Topics