Sulzer Pumps Inc.
Portland, OR 97210
Share:
New MIXPAC MixCoat Dispensing Systems are Designed for Railway Applications
MIXPAC™ MixCoat™ Dispensing Systems are available in manual and spray models. MixCoat™ Manual model is used for stripe coating and comes with unique brush assembly. Unit’s cartridges are available for 1:1, 2:1, 3:1 and 4:1 ratios ranging from 1500 mL to 940 mL. MixCoat™ Spray model consists of cartridges, mixer and pneumatic operated spray dispenser and features dial and settings on the...
Read More »
Sulzer Launches MIXPAC™ MixCoat™ Dispensing System for Small Volume Applications
MIXPAC™ MixCoat™ Dispensing System consists of DPS Spray Dispenser, cartridges, mixer and the pneumatic operated spray. Unit used for applying solid epoxies and abrasion-resistant coatings on pipes and transportation equipment, bores, walkways, and conveyor equipment. The system comes with cartridges ranging from 1500mL to 940mL for 1:1, 2:1, 3:1 and 4:1 ratios. Unit features dials and...
Read More »
MIXPAC™ MixCoat™ Spray Coating Dispensing System features dual stage trigger.
MIXPAC™ MixCoat™ Spray Coating Dispensing System is suitable for touch-up and repairs, pipeline repair and field joint coating applications. Unit comes with cartridges, mixers and pneumatic operated spray. This lightweight product’ settings and dials are available on the handle and offers 1:1, 2:1, 3:1 and 4:1 ratios. Dispensing system is compatible with single line and dual line flex hoses...
Read More »
MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System features dual stage trigger.
MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System is available in single flex line and dual flex line options. Unit is suitable for tanks and bilges in marine environments and water/wastewater manhole applications. Product can be mounted on a wall or ground. Featuring 90 degree tip for spraying in tight angles and straight tip for broader areas, dispensing system can adjust to 1:1,...
Read More »Bench-Top Dispenser meters 2-component reactive resins.
MIXPAC DXBG Dispenser allows A & B components of flowable adhesives to be gravity-fed from separate, refillable, 2 gal containers through integral DX dispenser, and components are then forced by metering rods directly into disposable static mixer. With ability to use bulk packaged materials, bench-top dispenser comes with foot pedal actuator, which allows for hands-free operation. Stand is fully...
Read More »MIXPAC Equipment Offers Custom Ratios for DX Series
MIXPAC Equipment Inc., a leading innovator of refillable, dual-component dispensing systems, announces custom ratio availability for its DX dispensing system. Custom ratios provide customers with a more versatile solution for two-component material dispensing. The MIXPAC DX System includes a mobile hand-held dispenser with a DXR refill station, offering the ability to dispense a wide variety of...
Read More »Hand-Held Dispenser suits small applications and tight spaces.
Weighing 5.3 lb, mobile DXH-3 offers 25 ml max output per stroke for dispensing in tight spaces or handling smaller-sized applications such as those in electronics industry. It can dispense variety of ratios for 2-component reactive resins, and multiple hand-held dispensers can safely be refilled with one MIXPAC DXR refill station. Refill station utilizes 2 transfer pumps that feed from 5-gal...
Read More »MIXPAC Equipment Offers Convenient Refill Station for DX Series Dispensing System
Meet production demands with quick replenishment of components MIXPAC Equipment Inc., a leading innovator of refillable, dual-component dispensing systems, offers the DXR refill station for quick and easy refilling of its DX Series dispensing system. The DXR helps to create a versatile and accurate solution for two-component material dispensing. The MIXPAC DX System offers the ability to dispense...
Read More »Portable, Bench-Top Dispenser handles 2-component resins.
Designed for hands-free operation, foot pedal-actuated DXB Bench Dispenser yields precise mix ratios and reproducible results when working with 2-component reactive resins of 1:1, 1.5:1, 2:1, 4:1, and 10:1 ratios. Design allows A and B components of flowable adhesives to be gravity-fed from separate, refillable, 2-gal containers through integral DXB Dispenser. Stand is fully adjustable over 3...
Read More »Hand-Held Dispenser works with dual-component materials.
Featuring mobile, hand-held dispenser with refill station, DX dispensing system works with 2-component materials of various viscosities when used with follower plates. It can dispense 1:1, 1.5:1, 2:1, 4:1, and 10:1 ratios for 2-component reactive resins. Multiple hand-held dispensers can be refilled with one DXR refill station, which utilizes 2 transfer pumps that feed from 5 gal bulk containers...
Read More »The Impact of the MixCoat System
BASF finds the Sulzer MixCoat System is a flexible rapid cure solution The Challenge In the roofing industry, application methods are limited for applying rapid cure materials. To start, rapid curing sealing membranes are delivered in 200-liter drums. This container volume is often too large for most touch-up and small project applications. In addition, the setup time for the standard rapid cure...
Read More »
New MIXPAC MixCoat Dispensing Systems are Designed for Railway Applications
MIXPAC™ MixCoat™ Dispensing Systems are available in manual and spray models. MixCoat™ Manual model is used for stripe coating and comes with unique brush assembly. Unit’s cartridges are available for 1:1, 2:1, 3:1 and 4:1 ratios ranging from 1500 mL to 940 mL. MixCoat™ Spray model consists of cartridges, mixer and pneumatic operated spray dispenser and features dial and settings on the...
Read More »
Sulzer Launches MIXPAC™ MixCoat™ Dispensing System for Small Volume Applications
MIXPAC™ MixCoat™ Dispensing System consists of DPS Spray Dispenser, cartridges, mixer and the pneumatic operated spray. Unit used for applying solid epoxies and abrasion-resistant coatings on pipes and transportation equipment, bores, walkways, and conveyor equipment. The system comes with cartridges ranging from 1500mL to 940mL for 1:1, 2:1, 3:1 and 4:1 ratios. Unit features dials and...
Read More »
MIXPAC™ MixCoat™ Spray Coating Dispensing System features dual stage trigger.
MIXPAC™ MixCoat™ Spray Coating Dispensing System is suitable for touch-up and repairs, pipeline repair and field joint coating applications. Unit comes with cartridges, mixers and pneumatic operated spray. This lightweight product’ settings and dials are available on the handle and offers 1:1, 2:1, 3:1 and 4:1 ratios. Dispensing system is compatible with single line and dual line flex hoses...
Read More »
MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System features dual stage trigger.
MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System is available in single flex line and dual flex line options. Unit is suitable for tanks and bilges in marine environments and water/wastewater manhole applications. Product can be mounted on a wall or ground. Featuring 90 degree tip for spraying in tight angles and straight tip for broader areas, dispensing system can adjust to 1:1,...
Read More »Bench-Top Dispenser meters 2-component reactive resins.
MIXPAC DXBG Dispenser allows A & B components of flowable adhesives to be gravity-fed from separate, refillable, 2 gal containers through integral DX dispenser, and components are then forced by metering rods directly into disposable static mixer. With ability to use bulk packaged materials, bench-top dispenser comes with foot pedal actuator, which allows for hands-free operation. Stand is fully...
Read More »MIXPAC Equipment Offers Custom Ratios for DX Series
MIXPAC Equipment Inc., a leading innovator of refillable, dual-component dispensing systems, announces custom ratio availability for its DX dispensing system. Custom ratios provide customers with a more versatile solution for two-component material dispensing. The MIXPAC DX System includes a mobile hand-held dispenser with a DXR refill station, offering the ability to dispense a wide variety of...
Read More »Hand-Held Dispenser suits small applications and tight spaces.
Weighing 5.3 lb, mobile DXH-3 offers 25 ml max output per stroke for dispensing in tight spaces or handling smaller-sized applications such as those in electronics industry. It can dispense variety of ratios for 2-component reactive resins, and multiple hand-held dispensers can safely be refilled with one MIXPAC DXR refill station. Refill station utilizes 2 transfer pumps that feed from 5-gal...
Read More »MIXPAC Equipment Offers Convenient Refill Station for DX Series Dispensing System
Meet production demands with quick replenishment of components MIXPAC Equipment Inc., a leading innovator of refillable, dual-component dispensing systems, offers the DXR refill station for quick and easy refilling of its DX Series dispensing system. The DXR helps to create a versatile and accurate solution for two-component material dispensing. The MIXPAC DX System offers the ability to dispense...
Read More »Portable, Bench-Top Dispenser handles 2-component resins.
Designed for hands-free operation, foot pedal-actuated DXB Bench Dispenser yields precise mix ratios and reproducible results when working with 2-component reactive resins of 1:1, 1.5:1, 2:1, 4:1, and 10:1 ratios. Design allows A and B components of flowable adhesives to be gravity-fed from separate, refillable, 2-gal containers through integral DXB Dispenser. Stand is fully adjustable over 3...
Read More »