LEWCO, Inc.

Multiple Chamber Field Assembled Oven Increases Production
Thermal & Heating Equipment

Multiple Chamber Field Assembled Oven Increases Production

Recently, LEWCO, Inc. was the chosen supplier to design, fabricate, and install a field assembled oven for a manufacturer of industrial components. The electrically heated oven has a maximum operating temperature of 350°F and will be used to cure silicone in hoses. The customer indicated the need to increase their production rate and therefore requested the oven to have three separate workspace...

Read More »
Delta Airlines Installs New LEWCO Composite Curing Oven
Thermal & Heating Equipment

Delta Airlines Installs New LEWCO Composite Curing Oven

As the composites industry grows, LEWCO continues to develop and expand its line of composite curing ovens. Delta Air Lines recently learned this when they purchased a 500°F. vacuum assisted composite curing oven to manufacture parts for their airplane cabins. The vacuum assisted composite curing (VACC) process involves drawing a vacuum on composite lay ups in vacuum bags while cured in an oven....

Read More »
Walk-In Ovens for Chemical Processing
Thermal & Heating Equipment

Walk-In Ovens for Chemical Processing

A customer in the chemical industry recently purchased two LEWCO Walk-In Ovens to heat materials in 55-gallon drums. In this process the heat evaporates water inside the drums to recover the material's solid contents. This was a critical step in the customer's process. The ovens, model EWR06FD, are heated by direct-fired natural gas and have a maximum temperature of 650°F., with a...

Read More »
LEWCO Completes Large Batch Oven for Aerospace Industry; Temperature Uniformity Exceeds Expectations
Thermal & Heating Equipment

LEWCO Completes Large Batch Oven for Aerospace Industry; Temperature Uniformity Exceeds Expectations

Recently, LEWCO, Inc. delivered another Enhanced Duty walk-in oven to a longtime customer in the aerospace industry. This is the sixth oven they have purchased from LEWCO in the past three years. It be used to will dry sheets of plaster for aircraft cabins. The oven has a maximum operating temperature of 500?F. and features a top mounted heater-box with a 1,500,000 BTU direct-fired natural gas...

Read More »
Continuous Process Oven Utilizes Recuperative Burner
Thermal & Heating Equipment

Continuous Process Oven Utilizes Recuperative Burner

LEWCO, Inc. recently delivered a custom continuous process oven to a manufacturer of welded wire mesh fabrics. The oven is rated for a maximum operating temperature of 1000°F. and will be used to cure PVC coated, welded wire mesh between 900°F - 950°F. PVC coated wire mesh can be used for a variety of things including marine traps, fencing, and shelving. The oven features a single,...

Read More »
350°F. LEWCO Oven used for Heating Wheel Resonators
Thermal & Heating Equipment

350°F. LEWCO Oven used for Heating Wheel Resonators

LEWCO, Inc. recently delivered a small walk-in oven to a Tier 2 Automotive Manufacturer of rubber and plastic air induction system parts, as well as other under-hood components. The oven is electrically heated and has a maximum operating temperature of 350°F. It will be used to heat wheel resonators, which are used to reduce tire cavity noise. The oven, which features a workspace of 60"W x 60"D...

Read More »
New Quick Ship Batch Oven Program
Thermal & Heating Equipment

New Quick Ship Batch Oven Program

Sandusky, OH - LEWCO, Inc. announces their new Quick Ship Batch Oven program. The program offers 20 standard models that are suitable for applications such as pre-heating, heat-treating, curing, baking, finishing and drying. These models offer premium quality and performance at a competitive price. Features include heavy-duty construction; a top or rear mounted heater box and simple user friendly...

Read More »
Custom High-Performance Drum Oven for Petrochemical Company
Thermal & Heating Equipment

Custom High-Performance Drum Oven for Petrochemical Company

LEWCO, Inc. recently manufactured a custom High-Performance Drum Oven for a petrochemical company in Thailand. The oven is steam heated and is rated for a maximum operating temperature of 250°F. The oven is specifically designed to heat (4) 55 gallon drums and features a rear mounted steam heater box with a high efficiency circulating fan to evenly distribute airflow throughout the workspace....

Read More »
LEWCO Designs Conveyor Ovens for Hose Clamp Manufacturer
Thermal & Heating Equipment

LEWCO Designs Conveyor Ovens for Hose Clamp Manufacturer

LEWCO, Inc. recently delivered two continuous conveyor ovens to a manufacturer of specialty hose clamps. The ovens, model CVB03ED, will be used to heat treat various hose clamps up to 350°F. Both ovens were designed to meet the requirements of NFPA 86, Class A ovens due to residual oil and other lubricants being present on the parts. Each oven features a top mounted heater-box with 36kW heat...

Read More »
Multiple Chamber Field Assembled Oven Increases Production
Thermal & Heating Equipment

Multiple Chamber Field Assembled Oven Increases Production

Recently, LEWCO, Inc. was the chosen supplier to design, fabricate, and install a field assembled oven for a manufacturer of industrial components. The electrically heated oven has a maximum operating temperature of 350°F and will be used to cure silicone in hoses. The customer indicated the need to increase their production rate and therefore requested the oven to have three separate workspace...

Read More »
People in the News

LEWCO Expands Sales Network

LEWCO, Inc., is pleased to announce the addition of eight representatives serving 21 states throughout the U.S. This experienced group of reps will support LEWCO's industrial oven sales and provide application assistance. The additional representation will enhance the customer expierence at LEWCO. Below is the new LEWCO reps contact information and territories they serve. M Squared Solutions...

Read More »
Delta Airlines Installs New LEWCO Composite Curing Oven
Thermal & Heating Equipment

Delta Airlines Installs New LEWCO Composite Curing Oven

As the composites industry grows, LEWCO continues to develop and expand its line of composite curing ovens. Delta Air Lines recently learned this when they purchased a 500°F. vacuum assisted composite curing oven to manufacture parts for their airplane cabins. The vacuum assisted composite curing (VACC) process involves drawing a vacuum on composite lay ups in vacuum bags while cured in an oven....

Read More »
Walk-In Ovens for Chemical Processing
Thermal & Heating Equipment

Walk-In Ovens for Chemical Processing

A customer in the chemical industry recently purchased two LEWCO Walk-In Ovens to heat materials in 55-gallon drums. In this process the heat evaporates water inside the drums to recover the material's solid contents. This was a critical step in the customer's process. The ovens, model EWR06FD, are heated by direct-fired natural gas and have a maximum temperature of 650°F., with a...

Read More »
LEWCO Completes Large Batch Oven for Aerospace Industry; Temperature Uniformity Exceeds Expectations
Thermal & Heating Equipment

LEWCO Completes Large Batch Oven for Aerospace Industry; Temperature Uniformity Exceeds Expectations

Recently, LEWCO, Inc. delivered another Enhanced Duty walk-in oven to a longtime customer in the aerospace industry. This is the sixth oven they have purchased from LEWCO in the past three years. It be used to will dry sheets of plaster for aircraft cabins. The oven has a maximum operating temperature of 500?F. and features a top mounted heater-box with a 1,500,000 BTU direct-fired natural gas...

Read More »
Continuous Process Oven Utilizes Recuperative Burner
Thermal & Heating Equipment

Continuous Process Oven Utilizes Recuperative Burner

LEWCO, Inc. recently delivered a custom continuous process oven to a manufacturer of welded wire mesh fabrics. The oven is rated for a maximum operating temperature of 1000°F. and will be used to cure PVC coated, welded wire mesh between 900°F - 950°F. PVC coated wire mesh can be used for a variety of things including marine traps, fencing, and shelving. The oven features a single,...

Read More »
350°F. LEWCO Oven used for Heating Wheel Resonators
Thermal & Heating Equipment

350°F. LEWCO Oven used for Heating Wheel Resonators

LEWCO, Inc. recently delivered a small walk-in oven to a Tier 2 Automotive Manufacturer of rubber and plastic air induction system parts, as well as other under-hood components. The oven is electrically heated and has a maximum operating temperature of 350°F. It will be used to heat wheel resonators, which are used to reduce tire cavity noise. The oven, which features a workspace of 60"W x 60"D...

Read More »
New Quick Ship Batch Oven Program
Thermal & Heating Equipment

New Quick Ship Batch Oven Program

Sandusky, OH - LEWCO, Inc. announces their new Quick Ship Batch Oven program. The program offers 20 standard models that are suitable for applications such as pre-heating, heat-treating, curing, baking, finishing and drying. These models offer premium quality and performance at a competitive price. Features include heavy-duty construction; a top or rear mounted heater box and simple user friendly...

Read More »
Custom High-Performance Drum Oven for Petrochemical Company
Thermal & Heating Equipment

Custom High-Performance Drum Oven for Petrochemical Company

LEWCO, Inc. recently manufactured a custom High-Performance Drum Oven for a petrochemical company in Thailand. The oven is steam heated and is rated for a maximum operating temperature of 250°F. The oven is specifically designed to heat (4) 55 gallon drums and features a rear mounted steam heater box with a high efficiency circulating fan to evenly distribute airflow throughout the workspace....

Read More »

All Topics