Alps Electric

Construction Equipment and Supplies

Introducing Our Reverse Mount Stand off 1.8mm Variety

SD Memory Card & MultiMediaCard(TM) Connectors (Reverse Mount Stand Off 1.8mm Type) SCDAAA0600 Upper frame with 4-GND terminal structure provides good characteristics for ESD and noise. Stand off type enables mounting of other components under connector. 8mm eject stroke for easy operation. Stable coplanarity due to insertion molding structure. Internal mechanism prevents accidental card ejection.

Read More »
Mechanical Power Transmission

Actuators Highly Responsive VCM (Voice Coil Motor) System Enables Accurate Autofocus along the Optical Axis

Autofocus Lens Actuator for Mobile Devices ATMB2Z/ATMC2Z Series Feature 2 types for different lens barrel sizes (M6: ATMC2Z, M5.5: ATMB2Z). ATMC2Z: Sensor base included to support low-profile camera modules. ATMB2Z: FPC/Socket connection type, metal shielded for EMC. Fully-automatic machine assembly minimizes production variation. Applications Autofocus cameras for mobile phones, smart phones,...

Read More »
Electrical Equipment & Systems

Sliding Contact Micro Switch features IP67-rated design.

Measuring 15.4 x 8.4 x 12.2 mm, SPVQ9 Series Sliding Contact Micro Switch has 2-sided sliding contact structure which clips fixed contacts from both sides, making structure resistant to particles, dust, vibration, and impact, ensuring reliable contact. Pressure at contact points is constantly maintained, including where switch is pressed, on/off switching, and switch's fully depressed point....

Read More »
WLAN Module for Smart Meters consumes 10 µA on standby.
Communication Systems & Equipment

WLAN Module for Smart Meters consumes 10 µA on standby.

All-in-One WLAN Module UGFZ1 Series features built-in CPU as well as GS1011 chip with antenna, Wi-Fi protocol, and connection applications. Integrated UART physical interface, ADC, IÂ-²C, PWM, and GPIO analog/digital port allow connection with devices such as humidity and lighting sensors. Devices/systems not originally equipped for networking can be WLAN-enabled via unit's serial interface...

Read More »
Tact Switch requires 4 N operation force.
Electrical Equipment & Systems

Tact Switch requires 4 N operation force.

Measuring 2.7 x 3.0 x 1.4 mm, SKSG Series TACT Switch(TM) features metal contact that combines high operation force of 4 Newtons with operating life of 200,000 cycles, making switch suitable for car AV equipment as well as keyless entry or car navigation systems. Definite clicking sensation helps prevent unintentional operation, while ground function prevents static electricity from flowing into...

Read More »
Vehicle-Mounted Switch enhances safety through control.
Electrical Equipment & Systems

Vehicle-Mounted Switch enhances safety through control.

Intended for use on steering wheel in automobiles, SKPR Series TACT Switch(TM) lets operator control onboard devices such as audio equipment and air-conditioners. Definite clicking sensation, due to operating force of 5 N, enhances vehicle comfort and safety while also protecting against accidental operation. With operating life of 100,000 cycles, 7.5 x 7.8 x 6.5 mm switch uses rubber spring...

Read More »
Magnetic Sensor features switching output.
Sensors, Monitors & Transducers

Magnetic Sensor features switching output.

Measuring 14.15 x 5.00 x 13.00 mm, snap-in Model HGDFPA006A provides detection distance of Hon = 0.6 mT while consuming 1.65 mA. Sensor can detect open or closed position of covers or doors in washing machines, refrigerators, and other home appliances and consumer electronics. With drive voltage of 4.5-5.5 V, product is also suitable for security mechanisms for windows and doors, and mechanisms...

Read More »
Electrical Equipment & Systems

Slide Switch offers low profile for mobile devices.

Measuring 5.5 x 2.5 x 0.7 mm, SSAJ series slide switch is suited for mobile phones, digital cameras, and compact music players. It includes operational knob reinforced by metal plate inserted into plastic body, while tactile feedback is created using plate spring that generates 1.5 N operating force. Offering maximum rating of 10 mA/5 Vdc, minimum frequency of 50 Â-µA/3 Vdc, unit has...

Read More »
Incremental Encoder comes with or without center push switch.
Communication Systems & Equipment

Incremental Encoder comes with or without center push switch.

Suited for car audio and navigation systems, Series EC11J 11 mm sized incremental encoders feature resolution of either 18 detents and 9 pulses or 30 detents and 15 pulses per rotation, depending on model. Units offer bushing length of 5, 7, or 10 mm and push-pull-strength of 100 N. Optional SPST push-on switch is rated for switching currents of up to 1 mA at 5 Vdc, requires operating force of...

Read More »
Construction Equipment and Supplies

Introducing Our Reverse Mount Stand off 1.8mm Variety

SD Memory Card & MultiMediaCard(TM) Connectors (Reverse Mount Stand Off 1.8mm Type) SCDAAA0600 Upper frame with 4-GND terminal structure provides good characteristics for ESD and noise. Stand off type enables mounting of other components under connector. 8mm eject stroke for easy operation. Stable coplanarity due to insertion molding structure. Internal mechanism prevents accidental card ejection.

Read More »
Mechanical Power Transmission

Actuators Highly Responsive VCM (Voice Coil Motor) System Enables Accurate Autofocus along the Optical Axis

Autofocus Lens Actuator for Mobile Devices ATMB2Z/ATMC2Z Series Feature 2 types for different lens barrel sizes (M6: ATMC2Z, M5.5: ATMB2Z). ATMC2Z: Sensor base included to support low-profile camera modules. ATMB2Z: FPC/Socket connection type, metal shielded for EMC. Fully-automatic machine assembly minimizes production variation. Applications Autofocus cameras for mobile phones, smart phones,...

Read More »
Electrical Equipment & Systems

Sliding Contact Micro Switch features IP67-rated design.

Measuring 15.4 x 8.4 x 12.2 mm, SPVQ9 Series Sliding Contact Micro Switch has 2-sided sliding contact structure which clips fixed contacts from both sides, making structure resistant to particles, dust, vibration, and impact, ensuring reliable contact. Pressure at contact points is constantly maintained, including where switch is pressed, on/off switching, and switch's fully depressed point....

Read More »
WLAN Module for Smart Meters consumes 10 µA on standby.
Communication Systems & Equipment

WLAN Module for Smart Meters consumes 10 µA on standby.

All-in-One WLAN Module UGFZ1 Series features built-in CPU as well as GS1011 chip with antenna, Wi-Fi protocol, and connection applications. Integrated UART physical interface, ADC, IÂ-²C, PWM, and GPIO analog/digital port allow connection with devices such as humidity and lighting sensors. Devices/systems not originally equipped for networking can be WLAN-enabled via unit's serial interface...

Read More »
Tact Switch requires 4 N operation force.
Electrical Equipment & Systems

Tact Switch requires 4 N operation force.

Measuring 2.7 x 3.0 x 1.4 mm, SKSG Series TACT Switch(TM) features metal contact that combines high operation force of 4 Newtons with operating life of 200,000 cycles, making switch suitable for car AV equipment as well as keyless entry or car navigation systems. Definite clicking sensation helps prevent unintentional operation, while ground function prevents static electricity from flowing into...

Read More »
Vehicle-Mounted Switch enhances safety through control.
Electrical Equipment & Systems

Vehicle-Mounted Switch enhances safety through control.

Intended for use on steering wheel in automobiles, SKPR Series TACT Switch(TM) lets operator control onboard devices such as audio equipment and air-conditioners. Definite clicking sensation, due to operating force of 5 N, enhances vehicle comfort and safety while also protecting against accidental operation. With operating life of 100,000 cycles, 7.5 x 7.8 x 6.5 mm switch uses rubber spring...

Read More »
Magnetic Sensor features switching output.
Sensors, Monitors & Transducers

Magnetic Sensor features switching output.

Measuring 14.15 x 5.00 x 13.00 mm, snap-in Model HGDFPA006A provides detection distance of Hon = 0.6 mT while consuming 1.65 mA. Sensor can detect open or closed position of covers or doors in washing machines, refrigerators, and other home appliances and consumer electronics. With drive voltage of 4.5-5.5 V, product is also suitable for security mechanisms for windows and doors, and mechanisms...

Read More »
Electrical Equipment & Systems

Slide Switch offers low profile for mobile devices.

Measuring 5.5 x 2.5 x 0.7 mm, SSAJ series slide switch is suited for mobile phones, digital cameras, and compact music players. It includes operational knob reinforced by metal plate inserted into plastic body, while tactile feedback is created using plate spring that generates 1.5 N operating force. Offering maximum rating of 10 mA/5 Vdc, minimum frequency of 50 Â-µA/3 Vdc, unit has...

Read More »
Incremental Encoder comes with or without center push switch.
Communication Systems & Equipment

Incremental Encoder comes with or without center push switch.

Suited for car audio and navigation systems, Series EC11J 11 mm sized incremental encoders feature resolution of either 18 detents and 9 pulses or 30 detents and 15 pulses per rotation, depending on model. Units offer bushing length of 5, 7, or 10 mm and push-pull-strength of 100 N. Optional SPST push-on switch is rated for switching currents of up to 1 mA at 5 Vdc, requires operating force of...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers