Malcom Company Inc.

Battery Powered Heat Gun For Wire Repair Applications Safety Approved for Use in Fueled Aircraft by Navair
Explosives, Armaments, and Weaponry

Battery Powered Heat Gun For Wire Repair Applications Safety Approved for Use in Fueled Aircraft by Navair

A portable battery powered heat gun that has been approved for listing in the US Navy (NAVAIR) 505 Wiring Technical Manual and eliminated using lighters and open flames is available from Malcom Technologies of Portsmouth, RI. The Malcom MCH-100-A Battery Powered Heat Gun Kit is fully portable, self contained solution for electrical wiring harness repairs in fueled aircraft on carriers and in...

Read More »
Battery-Powered Heat Gun offers digital temperature control.
Explosives, Armaments, and Weaponry

Battery-Powered Heat Gun offers digital temperature control.

Letting users preset operating temperature, MCH-100-D reaches up to 900°F and featuresÂ- programmable PID controller that can maintain working temperature within ±1°F of set point. Portable hand-held tool, powered by 48 V rechargeable battery, incorporates thermocouple inside heating element housing for optimum efficiency and accepts 100+ specialty stainless...

Read More »
Adhesives & Sealants

Battery Powered Heat Gun Kit for Repairing Waterproofing Thermo Plastic Membranes

PORTSMOUTH, RIÂ- – A new battery powered heat gun kit that was developed for repairing thermoplastic waterproofing liners for roofing and a host of other plant maintenance applications has been introduced by Malcom Company Inc. DBA Malcom technologies of Portsmouth, Rhode Island. The Malcom MCH-100-C Battery Powered heat Gun Liner Repair Kit features a lightweight, hand-held tool that...

Read More »
Battery Powered Heat Gun and Soldering Iron Kit for Battle Damage Repair Has Been Approved by Army Avionics
Explosives, Armaments, and Weaponry

Battery Powered Heat Gun and Soldering Iron Kit for Battle Damage Repair Has Been Approved by Army Avionics

United States Army Avionics has recently approved the Malcom Company MCH-100-A, Battery Powered Portable Heat Gun, for their new Battle Damage Assessment Repair Kit.Â-  The portable battery powered electric heat gun MCH-100-A, manufactured by Malcom Company of Portsmouth, Rhode Island, features a light weight battery powered self contained heat gun, battery powered soldering iron, power...

Read More »
Battery Powered Hot Iron suits hot melt applications in field.
Fluid & Gas Flow Equipment

Battery Powered Hot Iron suits hot melt applications in field.

Running on 48 Vdc, 180 W Model MCH-100-HM can reach temperatures up to 900°F. Portable tool features internal thermocouple that protrudes into brass tip which feeds back to Watlow temperature controller. Programmable controller allows operator to set upper and lower temperatures, adjust temperatures as needed, and set alarms. Designed to military standards, tool is suited for soldering,...

Read More »
Hot Air Reflectors suit heat shrinking and contactless soldering.
HVAC

Hot Air Reflectors suit heat shrinking and contactless soldering.

Suited for hot air applications using heat guns and hot air tools, Specialty Hot Air Reflectors feature nozzle design that retains heat from hot air passing through reflector. This accelerates heat transfer to product, reduces chance of overheating surrounding environment, and increases application speed. Custom-made to suit application requirements, stainless steel hot air reflectors and nozzles...

Read More »
Car Bumper Repair Kit fixes formerly unsalvageable bumpers.
Explosives, Armaments, and Weaponry

Car Bumper Repair Kit fixes formerly unsalvageable bumpers.

Automotive Bumper Repair Kit fixes and fabricates tabs and reinforces cracks using Heat'N Roll(TM) technique that pre-heats plastic bumper and then rolls mesh into softened bumper, delivering encapsulation and reinforcement. Kit components include 1,200 W heat gun, which that produces up to 1,150°F and 17.5 cfm; wide slot nozzle; proprietary mesh; and metal roller. Post-repair work can be...

Read More »
Hot Air Knife Blow-Off Systems dry machined metal parts.
Fluid & Gas Flow Equipment

Hot Air Knife Blow-Off Systems dry machined metal parts.

Malcom Hot Air Knife Systems dry machined metal, cast, or stamped parts. They can be configured with one or more hot air blowers, specialty deflectors, air nozzles, or tunnels, as well as various control options to blow air from ambient temperatures up to 1,000°F, at pressures up to 4.5 psi. Incorporating self-contained heat guns, systems fully dry metallic surfaces to prevent corrosion.

Read More »
Customized Heated Air Knifes remove water and condensation.
Fluid & Gas Flow Equipment

Customized Heated Air Knifes remove water and condensation.

Available with single and multiple hot air blowers, specialty deflectors, air nozzles, or tunnels, and various control options, Malcom Hot Air Knife Systems suit coating or preheating substrates. Hot air blowers are adjustable from ambient to 1,000°F with pressure up to 4.5 psi to provide appropriate velocity of heated air. Knifes help in removing water and condensation from bottles and...

Read More »
Hot Air Plastic Welding Kit repairs floor coverings.
Packaging Products & Equipment

Hot Air Plastic Welding Kit repairs floor coverings.

Able to be used where larger machines cannot, Plastic Floor Welding Kit contains everything necessary to make professional quality seam installations or repairs in flooring applications. Leister® Triac S hot air hand tool, included, has infinitely adjustable 68° to 1,292°F temperature range and 8 cfm airflow rating. Suitable for welding PVC, PE, linoleum, vinyl, and other floor...

Read More »
Battery Powered Heat Gun For Wire Repair Applications Safety Approved for Use in Fueled Aircraft by Navair
Explosives, Armaments, and Weaponry

Battery Powered Heat Gun For Wire Repair Applications Safety Approved for Use in Fueled Aircraft by Navair

A portable battery powered heat gun that has been approved for listing in the US Navy (NAVAIR) 505 Wiring Technical Manual and eliminated using lighters and open flames is available from Malcom Technologies of Portsmouth, RI. The Malcom MCH-100-A Battery Powered Heat Gun Kit is fully portable, self contained solution for electrical wiring harness repairs in fueled aircraft on carriers and in...

Read More »
Battery-Powered Heat Gun offers digital temperature control.
Explosives, Armaments, and Weaponry

Battery-Powered Heat Gun offers digital temperature control.

Letting users preset operating temperature, MCH-100-D reaches up to 900°F and featuresÂ- programmable PID controller that can maintain working temperature within ±1°F of set point. Portable hand-held tool, powered by 48 V rechargeable battery, incorporates thermocouple inside heating element housing for optimum efficiency and accepts 100+ specialty stainless...

Read More »
Adhesives & Sealants

Battery Powered Heat Gun Kit for Repairing Waterproofing Thermo Plastic Membranes

PORTSMOUTH, RIÂ- – A new battery powered heat gun kit that was developed for repairing thermoplastic waterproofing liners for roofing and a host of other plant maintenance applications has been introduced by Malcom Company Inc. DBA Malcom technologies of Portsmouth, Rhode Island. The Malcom MCH-100-C Battery Powered heat Gun Liner Repair Kit features a lightweight, hand-held tool that...

Read More »
Company News

Malcom Company Inc. Has Introduced a New Website

PORTSMOUTH, RI – Malcom Company Inc. is now doing business as Malcom Technologies has introduced a new website featuring a GSA Advantage direct link for Federal, State, and Local Government agencies interested in purchasing hot air tools and heat guns for a wide range of maintenance applications. Malcom Technologies' Website provides Federal, State and Local Government agencies including...

Read More »
Battery Powered Heat Gun and Soldering Iron Kit for Battle Damage Repair Has Been Approved by Army Avionics
Explosives, Armaments, and Weaponry

Battery Powered Heat Gun and Soldering Iron Kit for Battle Damage Repair Has Been Approved by Army Avionics

United States Army Avionics has recently approved the Malcom Company MCH-100-A, Battery Powered Portable Heat Gun, for their new Battle Damage Assessment Repair Kit.Â-  The portable battery powered electric heat gun MCH-100-A, manufactured by Malcom Company of Portsmouth, Rhode Island, features a light weight battery powered self contained heat gun, battery powered soldering iron, power...

Read More »
Battery Powered Hot Iron suits hot melt applications in field.
Fluid & Gas Flow Equipment

Battery Powered Hot Iron suits hot melt applications in field.

Running on 48 Vdc, 180 W Model MCH-100-HM can reach temperatures up to 900°F. Portable tool features internal thermocouple that protrudes into brass tip which feeds back to Watlow temperature controller. Programmable controller allows operator to set upper and lower temperatures, adjust temperatures as needed, and set alarms. Designed to military standards, tool is suited for soldering,...

Read More »
Hot Air Reflectors suit heat shrinking and contactless soldering.
HVAC

Hot Air Reflectors suit heat shrinking and contactless soldering.

Suited for hot air applications using heat guns and hot air tools, Specialty Hot Air Reflectors feature nozzle design that retains heat from hot air passing through reflector. This accelerates heat transfer to product, reduces chance of overheating surrounding environment, and increases application speed. Custom-made to suit application requirements, stainless steel hot air reflectors and nozzles...

Read More »
Car Bumper Repair Kit fixes formerly unsalvageable bumpers.
Explosives, Armaments, and Weaponry

Car Bumper Repair Kit fixes formerly unsalvageable bumpers.

Automotive Bumper Repair Kit fixes and fabricates tabs and reinforces cracks using Heat'N Roll(TM) technique that pre-heats plastic bumper and then rolls mesh into softened bumper, delivering encapsulation and reinforcement. Kit components include 1,200 W heat gun, which that produces up to 1,150°F and 17.5 cfm; wide slot nozzle; proprietary mesh; and metal roller. Post-repair work can be...

Read More »
Hot Air Knife Blow-Off Systems dry machined metal parts.
Fluid & Gas Flow Equipment

Hot Air Knife Blow-Off Systems dry machined metal parts.

Malcom Hot Air Knife Systems dry machined metal, cast, or stamped parts. They can be configured with one or more hot air blowers, specialty deflectors, air nozzles, or tunnels, as well as various control options to blow air from ambient temperatures up to 1,000°F, at pressures up to 4.5 psi. Incorporating self-contained heat guns, systems fully dry metallic surfaces to prevent corrosion.

Read More »
Customized Heated Air Knifes remove water and condensation.
Fluid & Gas Flow Equipment

Customized Heated Air Knifes remove water and condensation.

Available with single and multiple hot air blowers, specialty deflectors, air nozzles, or tunnels, and various control options, Malcom Hot Air Knife Systems suit coating or preheating substrates. Hot air blowers are adjustable from ambient to 1,000°F with pressure up to 4.5 psi to provide appropriate velocity of heated air. Knifes help in removing water and condensation from bottles and...

Read More »

All Topics