ATI Industrial Automation

Sensors, Monitors & Transducers

Sensor System provides EtherNet/IP(TM) and CAN bus interfaces.

Supporting range of automation and research applications, Network Force/Torque (Net F/T) Sensor System measures 6 components of force and torque (Fx, Fy, Fz, Tx, Ty, Tz). It can be connected to LAN for remote operation and monitoring, and has output rates up to 7,000 Hz for 6 axes of measurement over Ethernet using UDP. System features programmable thresholding, built-in status indicators,...

Read More »
Correct Alignment Errors in Automated Assembly Applications
Controls & Controllers

Correct Alignment Errors in Automated Assembly Applications

The Compensator, a remote center of compliance (RCC) device that is designed to correct alignment errors with peg-in-hole automated assembly applications, is available from ATI Industrial Automation, Apex, N.C. The Compensator device features shear pads that are stiff axially and compliant laterally to allow automated assembly machines to "automatically" correct for lateral and rotational...

Read More »
Six-Axis Force/Torque Sensor is suited for humanoid robots.
Sensors, Monitors & Transducers

Six-Axis Force/Torque Sensor is suited for humanoid robots.

With ability to sense forces and moments applied in 6 degrees of freedom (Fx, Fy, Fz, Tx, Ty, and Tz), Mini85 Sensor is used in ankle joint of robot, sending force feedback to control robot's motion. It features E series cable connection, transducer, shielded high-flex cable, and intelligent data acquisition system or stand-alone controller. Measuring 3.35 x 1.17 in., sensor weighs 1.4 lb, and...

Read More »
Force/Torque Sensor can be used in fresh water environment.
Sensors, Monitors & Transducers

Force/Torque Sensor can be used in fresh water environment.

Suited for naval research applications and tank testing for aerospace applications, IP68 Underwater DAQ Sensors can be used to depth of 10 m for underwater testing. Incorporating nitrile and silicone O-rings to assure that no water enters units, sensors feature sealed stainless steel body construction, and rugged lemo connectors. Series includes models DELTA with 5.8 lb, THETA with 20 lb, OMEGA...

Read More »
Automatic Tool Changers Play Key Role in Flexible Manufacturing Transformation at Chrysler
Electronic Components & Devices

Automatic Tool Changers Play Key Role in Flexible Manufacturing Transformation at Chrysler

Automatic tool changers give robots the ability to perform a variety of tasks by providing a means to quickly change end-effectors. Robots with Heavy Automation Tool Changers supplied by ATI Industrial Automation, Apex, N.C. at Chrysler Group's Belvidere, Ill. Assembly Plant provide the ability to produce multiple model cars on a single assembly line. Chrysler Group's new flexible manufacturing...

Read More »
Finishing Tool features axially compliant design.
Portable Tools

Finishing Tool features axially compliant design.

Suited for robotic and automated material finishing operations on aluminum, plastic, and steel, VersaFinish(TM) has floating motor and spindle arrangement that provides finishing tip's axial compliance to perform consistently on irregular part patterns. Motor maintains working spindle speed of 2,600 rpm, and compliance force is 3.2-16.7 lb at air supply pressure of 5-60 psi. Rotating spindle is...

Read More »
Collision Sensor suits wide variety of industrial robots.
Sensors, Monitors & Transducers

Collision Sensor suits wide variety of industrial robots.

Suited for applications using 3-5 kg capacity robots, Model SR-61 helps prevent damage to robotic end-effectors resulting from robot crashes. In operation, sensor is adjusted to support typical loads experienced by robot arm in all directions including angular, compression, and torsional. Sensor absorbs crash and resets itself within 0.001 in. of original position. Three-wire PNP proximity switch...

Read More »
Finishing Tool compensates for irregular part patterns.

Finishing Tool compensates for irregular part patterns.

Mounted to robot or CNC machine, Flexfinish(TM) axially-compliant finishing tool features floating motor and spindle arrangement, vane-type air motor, and remotely-adjustable air pressure. Rotating spindle is equipped with 3/8 in. chuck to hold variety of finishing devices. Weighing 7.25 lb and requiring 390 W power, motor maintains working spindle speed of 2,600 rpm and compliance force is...

Read More »
Portable Tools

Finishing Tool satisfies automated finishing operations.

Suited for finishing aluminum, plastic, and steel, air-turbine-driven Flexdeburr® features floating motor and spindle arrangement that provides ±0.31 in. of radial compliance for consistency on irregular part patterns. Spinning at constant 40,000 rpm, tool can finish hard materials at 1-3 ips and soft materials from 3-12 ips. It has 1 air connection at 90 psi to spin cutting file, and...

Read More »
Electrical Module interfaces with robotic tool changers.
Construction Equipment and Supplies

Electrical Module interfaces with robotic tool changers.

Compact, lightweight, G19-Swivel Electrical Module is used to pass electrical signals from robot side to tool side of quick-connect robotic tool changers. Cable can be positioned at any of 5 different angles through a 180° span to facilitate robot cable dress. Constructed of anodized high-strength aluminum alloy, module features 19-pin electrical interface, 5 A/250 Vac capacity, and mates...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers