Martin Engineering
Neponset, IL 61345
Share:
Dust Caps prevent material accumulation at conveyor base.
Made from accumulation-resistant molded polyurethane, MARTINÃ-® Dust Caps are pyramids that cause material to fall away from conveyor foot, allowing user to collect dust and clean it by washing down or sweeping around conveyor. Caps prevent buildup of fugitive material, fire hazards, and corrosion and weakening of conveyor structure. Available in 3 and 4 in. sizes to fit structural steel...
Read More »
Conveyor Skirting is optimized for extended service life.
Double APRON SEAL(TM) Skirting provides 2 wear surfaces on one elastomer sealing strip installed along bottom of skirtboard in belt conveyor loading zone. When bottom side of strip against belt is worn, sealing strip is inverted to double service life. Product helps contain material, eliminate spillage, and reduce cleanup effort. Primary seal is clamped to steel skirtboard to keep lumps on belt,...
Read More »Discharge Nozzle offers 2-part design to aid replacement.
MARTINÃ-® Removable Air Cannon Discharge Nozzle eliminates need to dismount air cannon from outside of vessel to change nozzle from inside, minimizing downtime. Device consists of outer collar, permanently mounted on outside of vessel, to which replaceable inner fan nozzle mates. Interlocking system allows nozzle to be positively positioned so air cannon discharge is properly directed.
Read More »
Martin Engineering Improves Blade Design for MARTIN-® QC(TM) No.1 Heavy-Duty Pre-Cleaner
August 16, 2006--(NEPONSET, IL) To improve cleaning performance throughout blade life, Martin Engineering has improved the design of the urethane blade used with the MARTINÃ-® QC(TM) #1 Heavy-Duty Pre-Cleaner with a new beefier profile. The new design for the MARTINÃ-® QC(TM) #1 Heavy-Duty Pre-Cleaner Blade also provides a more aggressive angle against the belt to improve cleaning...
Read More »Exhaust Valve aids in safety of air cannon systems.
Providing positive-acting discharge mechanism, MARTINÃ-® TORNADO Exhaust Valve, when installed on air cannon, fires in response to positive surge of air pressure sent by solenoid valve. As discharge requires positive signal, air cannon will not fire accidentally in response to drop in line pressure due to failure in air supply. Exhaust valve is available on BIG BLASTERÃ-® XHV Air Cannons...
Read More »
Skirting prevents material spillage from conveyors.
BOCO(TM) Self-Adjusting Skirting automatically maintains sealing pressure on conveyor skirtboard. While entire assembly is 6 in. tall, rubber sealing strip provides 2 in. wear life. Supported on pressure arms between steel plates, system's rubber sealing strip rises and falls with fluctuations in belt travel, maintaining seal as it wears. Strip is available in lengths up to 300 ft for...
Read More »
Secondary Belt Cleaner incorporates rubber cushions.
MARTINÃ-® SQC2(TM) is composed of individual 5.88 in. wide blade segments assembled on mainframe to remove residual material from belt's load-carrying width. Each segment incorporates individual rubber buffer or cushion to absorb impact and allow splices to pass without damage. Cleaner is suited for use on conveyors with belt speeds up to 1,000 fpm, with mechanical belt splices, or that...
Read More »
Pneumatic Turbine Vibrator moves bulk solids.
MARTINÃ-® WHIRLWIND(TM) High-Frequency Turbine Vibrator uses urethane-encapsulated turbine to output over 10,000 force pounds with noise levels well within OSHA limits. Built-in handle allows one-worker portability for use in railcar unloading or for consolidation of pre-cast concrete or refractory. Unit mounts to cradle lug bracket or railcar wedge, or can be permanently mounted.
Read More »
Belt Cleaner reduces risk to belt or splice.
Bull Dawg(TM) allows aggressive belt cleaning by using tungsten carbide cleaning elements cushioned with internal elastomer pillow to remove carryback and return it to material stream. It installs at 5 o'clock position against head pulley and can be used as stand-alone, pre, or secondary cleaner as part of multiple cleaner system. Each arm-and-blade element is cushioned with Shock Blok(TM) shock...
Read More »
Flow Chutes offer belt-to-belt transfer of material.
INERTIAL FLOW(TM) Chutes provide custom-engineered flow of bulk solids in conveyor loading and discharge applications. Chutes consist of hood discharge chute, spoon receiving chute, and flow-engineered enclosure to contain stream of material. INERTIAL FLOW(TM) Transfer Points offer passive dust control, reduced material buildups and blockages, and reduced loading impact. Controlled load placement...
Read More »
Dust Caps prevent material accumulation at conveyor base.
Made from accumulation-resistant molded polyurethane, MARTINÃ-® Dust Caps are pyramids that cause material to fall away from conveyor foot, allowing user to collect dust and clean it by washing down or sweeping around conveyor. Caps prevent buildup of fugitive material, fire hazards, and corrosion and weakening of conveyor structure. Available in 3 and 4 in. sizes to fit structural steel...
Read More »
Conveyor Skirting is optimized for extended service life.
Double APRON SEAL(TM) Skirting provides 2 wear surfaces on one elastomer sealing strip installed along bottom of skirtboard in belt conveyor loading zone. When bottom side of strip against belt is worn, sealing strip is inverted to double service life. Product helps contain material, eliminate spillage, and reduce cleanup effort. Primary seal is clamped to steel skirtboard to keep lumps on belt,...
Read More »Discharge Nozzle offers 2-part design to aid replacement.
MARTINÃ-® Removable Air Cannon Discharge Nozzle eliminates need to dismount air cannon from outside of vessel to change nozzle from inside, minimizing downtime. Device consists of outer collar, permanently mounted on outside of vessel, to which replaceable inner fan nozzle mates. Interlocking system allows nozzle to be positively positioned so air cannon discharge is properly directed.
Read More »Martin Engineering Prevails in Infringement Lawsuit
September 19, 2008 -- Martin Engineering Company, of One Martin Place, Neponset, Illinois, has prevailed in a suit (Civil Action No. 05-cv-00086-RPM-MJW) for patent infringement filed against Martin Engineering by Air Control Science, Inc, a Division of CCC Group, Inc, located at 5660 Greenwood Plaza Boulevard, Suite 445, Greenwood Village, Colorado. In January 2005, Air Control Science, Inc....
Read More »Martin Engineering Center for Innovation to Undertake Cooperative Research to Improve Industry
May 27, 2008 Research Center Focused on Customer-Specific Problems (Neponset IL)-Cooperative research programs with industry leaders to solve identified material handling problems are a significant part of the mission of Martin Engineering's new Center for Bulk Materials Handling Innovation (CFI). Part pure-science research laboratory, and part industrial product development center, CFI will...
Read More »Martin Engineering Introduces On-Line Selector for Transfer Point Components
Specify Transfer Point Components on www.martin-eng.com Martin Engineering (Neponset, IL) has brought the specification of conveyor transfer point components to the Internet with the introduction of an on-line MARTINÃ-® Transfer Point System Selector on the company's website www.martin-eng.com. Following entry of the characteristics of a belt conveyor and its cargo, the new System Selector...
Read More »
Martin Engineering Improves Blade Design for MARTIN-® QC(TM) No.1 Heavy-Duty Pre-Cleaner
August 16, 2006--(NEPONSET, IL) To improve cleaning performance throughout blade life, Martin Engineering has improved the design of the urethane blade used with the MARTINÃ-® QC(TM) #1 Heavy-Duty Pre-Cleaner with a new beefier profile. The new design for the MARTINÃ-® QC(TM) #1 Heavy-Duty Pre-Cleaner Blade also provides a more aggressive angle against the belt to improve cleaning...
Read More »Martin Engineering Breaks Ground for Center for Innovation in Neponset
(Neponset IL)--Martin Engineering has announced plans to construct in Neponset a multi-million dollar, world class research and development center which will focus on bulk material handling technology advancement. The new Martin Engineering Center for Bulk Solids Handling Innovation will concentrate on developing solutions to reduce or eliminate dust and spillage resulting from handling bulk...
Read More »Exhaust Valve aids in safety of air cannon systems.
Providing positive-acting discharge mechanism, MARTINÃ-® TORNADO Exhaust Valve, when installed on air cannon, fires in response to positive surge of air pressure sent by solenoid valve. As discharge requires positive signal, air cannon will not fire accidentally in response to drop in line pressure due to failure in air supply. Exhaust valve is available on BIG BLASTERÃ-® XHV Air Cannons...
Read More »
Skirting prevents material spillage from conveyors.
BOCO(TM) Self-Adjusting Skirting automatically maintains sealing pressure on conveyor skirtboard. While entire assembly is 6 in. tall, rubber sealing strip provides 2 in. wear life. Supported on pressure arms between steel plates, system's rubber sealing strip rises and falls with fluctuations in belt travel, maintaining seal as it wears. Strip is available in lengths up to 300 ft for...
Read More »