Martin Engineering
Neponset, IL 61345
Share:
Conveyor Skirting is optimized for extended service life.
Double APRON SEAL(TM) Skirting provides 2 wear surfaces on one elastomer sealing strip installed along bottom of skirtboard in belt conveyor loading zone. When bottom side of strip against belt is worn, sealing strip is inverted to double service life. Product helps contain material, eliminate spillage, and reduce cleanup effort. Primary seal is clamped to steel skirtboard to keep lumps on belt,...
Read More »Discharge Nozzle offers 2-part design to aid replacement.
MARTIN-® Removable Air Cannon Discharge Nozzle eliminates need to dismount air cannon from outside of vessel to change nozzle from inside, minimizing downtime. Device consists of outer collar, permanently mounted on outside of vessel, to which replaceable inner fan nozzle mates. Interlocking system allows nozzle to be positively positioned so air cannon discharge is properly directed.
Read More »
Martin Engineering Improves Blade Design for MARTIN® QC(TM) No.1 Heavy-Duty Pre-Cleaner
August 16, 2006--(NEPONSET, IL) To improve cleaning performance throughout blade life, Martin Engineering has improved the design of the urethane blade used with the MARTIN-® QC(TM) #1 Heavy-Duty Pre-Cleaner with a new beefier profile. The new design for the MARTIN-® QC(TM) #1 Heavy-Duty Pre-Cleaner Blade also provides a more aggressive angle against the belt to improve cleaning performance....
Read More »
Skirting prevents material spillage from conveyors.
BOCO(TM) Self-Adjusting Skirting automatically maintains sealing pressure on conveyor skirtboard. While entire assembly is 6 in. tall, rubber sealing strip provides 2 in. wear life. Supported on pressure arms between steel plates, system's rubber sealing strip rises and falls with fluctuations in belt travel, maintaining seal as it wears. Strip is available in lengths up to 300 ft for...
Read More »
Mist System supresses dust in open air sites.
Fog Cannon(TM) provides jet of air, water, and additive mist to provide dust control over bulk material handling sites such as stockpiles, reclaims, railcar dumps, and blasting sites. Fan and plug-free nozzles propel 77 to 110 micron particles in mist that agglomerates airborne solids and prevents escape of fugitive dust. Depending on model, it projects mist up to 800 ft, suppressing dust in...
Read More »
Conveyor Skirtboard automatically adjusts to keep seal.
BOCO(TM) Automatic Skirting keeps material on conveyor belt and prevents loading zone spillage. Skirting floats on belt, maintaining seal without maintenance. Supported on pressure arms between 2 steel plates, system's rubber sealing strip rises and falls with fluctuations in belt travel. When worn, replacement of sealing strip is no-tool operation, as rubber is held in place with linchpins.
Read More »
Conveyor Skirting is optimized for extended service life.
Double APRON SEAL(TM) Skirting provides 2 wear surfaces on one elastomer sealing strip installed along bottom of skirtboard in belt conveyor loading zone. When bottom side of strip against belt is worn, sealing strip is inverted to double service life. Product helps contain material, eliminate spillage, and reduce cleanup effort. Primary seal is clamped to steel skirtboard to keep lumps on belt,...
Read More »Discharge Nozzle offers 2-part design to aid replacement.
MARTIN-® Removable Air Cannon Discharge Nozzle eliminates need to dismount air cannon from outside of vessel to change nozzle from inside, minimizing downtime. Device consists of outer collar, permanently mounted on outside of vessel, to which replaceable inner fan nozzle mates. Interlocking system allows nozzle to be positively positioned so air cannon discharge is properly directed.
Read More »Martin Engineering Prevails in Infringement Lawsuit
September 19, 2008 -- Martin Engineering Company, of One Martin Place, Neponset, Illinois, has prevailed in a suit (Civil Action No. 05-cv-00086-RPM-MJW) for patent infringement filed against Martin Engineering by Air Control Science, Inc, a Division of CCC Group, Inc, located at 5660 Greenwood Plaza Boulevard, Suite 445, Greenwood Village, Colorado. In January 2005, Air Control Science, Inc....
Read More »Martin Engineering Center for Innovation to Undertake Cooperative Research to Improve Industry
May 27, 2008 Research Center Focused on Customer-Specific Problems (Neponset IL)-Cooperative research programs with industry leaders to solve identified material handling problems are a significant part of the mission of Martin Engineering's new Center for Bulk Materials Handling Innovation (CFI). Part pure-science research laboratory, and part industrial product development center, CFI will...
Read More »Martin Engineering Introduces On-Line Selector for Transfer Point Components
Specify Transfer Point Components on www.martin-eng.com Martin Engineering (Neponset, IL) has brought the specification of conveyor transfer point components to the Internet with the introduction of an on-line MARTIN-® Transfer Point System Selector on the company's website www.martin-eng.com. Following entry of the characteristics of a belt conveyor and its cargo, the new System Selector will...
Read More »
Martin Engineering Improves Blade Design for MARTIN® QC(TM) No.1 Heavy-Duty Pre-Cleaner
August 16, 2006--(NEPONSET, IL) To improve cleaning performance throughout blade life, Martin Engineering has improved the design of the urethane blade used with the MARTIN-® QC(TM) #1 Heavy-Duty Pre-Cleaner with a new beefier profile. The new design for the MARTIN-® QC(TM) #1 Heavy-Duty Pre-Cleaner Blade also provides a more aggressive angle against the belt to improve cleaning performance....
Read More »Martin Engineering Breaks Ground for Center for Innovation in Neponset
(Neponset IL)--Martin Engineering has announced plans to construct in Neponset a multi-million dollar, world class research and development center which will focus on bulk material handling technology advancement. The new Martin Engineering Center for Bulk Solids Handling Innovation will concentrate on developing solutions to reduce or eliminate dust and spillage resulting from handling bulk...
Read More »
Skirting prevents material spillage from conveyors.
BOCO(TM) Self-Adjusting Skirting automatically maintains sealing pressure on conveyor skirtboard. While entire assembly is 6 in. tall, rubber sealing strip provides 2 in. wear life. Supported on pressure arms between steel plates, system's rubber sealing strip rises and falls with fluctuations in belt travel, maintaining seal as it wears. Strip is available in lengths up to 300 ft for...
Read More »
Mist System supresses dust in open air sites.
Fog Cannon(TM) provides jet of air, water, and additive mist to provide dust control over bulk material handling sites such as stockpiles, reclaims, railcar dumps, and blasting sites. Fan and plug-free nozzles propel 77 to 110 micron particles in mist that agglomerates airborne solids and prevents escape of fugitive dust. Depending on model, it projects mist up to 800 ft, suppressing dust in...
Read More »
Conveyor Skirtboard automatically adjusts to keep seal.
BOCO(TM) Automatic Skirting keeps material on conveyor belt and prevents loading zone spillage. Skirting floats on belt, maintaining seal without maintenance. Supported on pressure arms between 2 steel plates, system's rubber sealing strip rises and falls with fluctuations in belt travel. When worn, replacement of sealing strip is no-tool operation, as rubber is held in place with linchpins.
Read More »