Hirschmann Engineering USA, Inc.
Suite 104
Schaumburg, IL 60173
Hirschmann Solutions and inthinc® Partner to Launch M2M Gateway
M2M Gateway module (Advanced 3G Gateway and WiFi Router with Bridge) expands in-vehicle connectivity options for telematics and user interface devices AUBURN HILLS, Mich.- — Hirschmann Solutions, a leading supplier of antenna and transceiver systems, has partnered with leading telematics service provider inthinc to launch a breakthrough new M2M Gateway module. The module provides advanced...
Read More »Hirschmann Solutions to Introduce New Telematics and M2M Products during CTIA's Super Mobility Week
Hirschmann Solutions to demonstrate innovation excellence on Sept. 9-11 at Sands Expo and Convention Center in Las Vegas AUBURN HILLS, Mich.- – Hirschmann Solutions, a leading supplier of antenna and transceiver systems for M2M (machine to machine) and automotive communications, will introduce its latest tailored telematics and M2M solutions during Super Mobility Week powered by CTIA - The...
Read More »Satellite Antenna supports fleet and asset management.
Utilizing Iridium's 66 Low Earth Orbiting satellites,- Iridium Transceiver Antenna System can communicate outside traditional cellular networks to provide service worldwide. Plug-and-play unit integrates antenna, Iridium modem, power regulation, and serial communication interface. ITAS provides data transmission for asset management and safety-related applications, including tracking and...
Read More »
EDM Tapping Accessory adds orbital movement.
Attached to RAM of any EDM sinker machine, EDtapper can add tapped/threaded hole into hardened steel without requiring lead screw. It converts 2-axis vertical movement to orbital movement, forming entire depth of thread in one orbital cycle. Featuring up to 1/8 in. horizontal movement in 0.001 in. increments, 2 positions for electrode attachment are available: orbital fixed angular movement for...
Read More »
Submersible Rotary Indexing Spindle is suited for EDM.
In addition to bearings with minimum radial run-out, H80R.MNCM incorporates AC variable speed motor and Heidenhain encoder for direct measurement positioning of -±5 arc sec. Programmable variable speed AC control (H1625.AC3) allows adjustment of continuous high-speed rotation and indexing, which can be used for automatic operation via M-Code. Spindle can also be integrated directly to certain...
Read More »
Rotary Spindle enables EDM turning of microstructures.
Combination of Model H80R.MAC Rotary Spindle and Model H1680.AC4 variable-speed ac control enable production of miniature round parts. Contour shapes are programmed into EDM control, eliminating contoured wheels. Spindle and refined generator settings allow EDM turning of diameters down to .002 in. with surfaces to Ra 0,2. Applications include ejector pins for micro molds, miniature valve slides,...
Read More »
Software automates machining operations.
Run from dedicated PC, Cell Master v5.0 real-time Cell Management System prepares, organizes, and executes work in automated CNC machine environment for toolmaking, moldmaking, and job shop machining. Windows-based program controls robot, machine tools, and scheduling, enabling jobs to be rearranged, added, or deleted without interrupting machine tools. System supports all types of machining and...
Read More »
Integrated B-Axis suits wire and sink EDMs.
Developed to incorporate servomotors and encoders of OEMs, H150R.NC Series features corrosion-resistant, stainless steel housing and can be constructed with various spindle configurations. Spindle tapers and styles include CAT or BT 40 and 50, HSK63, 3-jaw chuck with through hole and 150 mm dia faceplate. Tapers can be pneumatically opened and closed to allow for robotic or manual loading....
Read More »
Toe Clamp Kit is designed for wire EDM tables.
Organized in plastic injection molded case, HE4850 8 mm Toe Clamp Kit contains elements that toe clamp workpieces to wire EDM table when tooling systems are not in use. Kit includes 4 hardened SS low profile toe clamps that allow max obstruction of 0.275 in. above work piece, and 20 hexagon spacers of two different lengths. It incorporates 8 mm socket head cap screws and set screws of different...
Read More »
Counter Support suites wire EDM applications.
Slid-Able Counter Support, Model H4265, incorporates 2 levels for workpiece to rest on and be clamped to. Bottom has removable 6 mm thick base, and is same height of plate that supports workpiece, allowing collision-free clamping. With base removed, workpiece can be held at zero line of machine table. Elongated slot in center of support allows for lateral adjustment of approximately 4-½ in. in...
Read More »Hirschmann Solutions and inthinc® Partner to Launch M2M Gateway
M2M Gateway module (Advanced 3G Gateway and WiFi Router with Bridge) expands in-vehicle connectivity options for telematics and user interface devices AUBURN HILLS, Mich.- — Hirschmann Solutions, a leading supplier of antenna and transceiver systems, has partnered with leading telematics service provider inthinc to launch a breakthrough new M2M Gateway module. The module provides advanced...
Read More »Hirschmann Solutions to Introduce New Telematics and M2M Products during CTIA's Super Mobility Week
Hirschmann Solutions to demonstrate innovation excellence on Sept. 9-11 at Sands Expo and Convention Center in Las Vegas AUBURN HILLS, Mich.- – Hirschmann Solutions, a leading supplier of antenna and transceiver systems for M2M (machine to machine) and automotive communications, will introduce its latest tailored telematics and M2M solutions during Super Mobility Week powered by CTIA - The...
Read More »Satellite Antenna supports fleet and asset management.
Utilizing Iridium's 66 Low Earth Orbiting satellites,- Iridium Transceiver Antenna System can communicate outside traditional cellular networks to provide service worldwide. Plug-and-play unit integrates antenna, Iridium modem, power regulation, and serial communication interface. ITAS provides data transmission for asset management and safety-related applications, including tracking and...
Read More »
EDM Tapping Accessory adds orbital movement.
Attached to RAM of any EDM sinker machine, EDtapper can add tapped/threaded hole into hardened steel without requiring lead screw. It converts 2-axis vertical movement to orbital movement, forming entire depth of thread in one orbital cycle. Featuring up to 1/8 in. horizontal movement in 0.001 in. increments, 2 positions for electrode attachment are available: orbital fixed angular movement for...
Read More »Darren Carroll Joins Hirschmann Engineering as Regional Sales Manager
Peter Knowles, President, HIRSCHMANN Engineering USA, Inc., Elgin, IL recently announced that Darren Carroll had joined HIRSCHMANN Engineering, USA, as a Regional Sales Manager, responsible for selling and servicing the HIRSCHMANN product line in northern Ohio, Michigan and Canada. Mr. Carroll resides in Newmarket, Ontario, where he was most recently employed by Mitsubishi EDM/Laser. He assisted...
Read More »Hirschmann Offers New Automation Catalog and Web Site
HIRSCHMANN Automation LLC, a division of HIRSCHMANN Engineering USA, Inc., Elgin, Illinois, recently completed a new catalog, HIRSCHMANN AUTOMATION: Flexible Automation Solutions for Machine Tools and launched their web site www.HIRSCHAUTOMATION.com that demonstrates how their EROBOT product line of simple loaders and FANUC 6-axes robots are used with machine tools for manufacturing and how their...
Read More »
Submersible Rotary Indexing Spindle is suited for EDM.
In addition to bearings with minimum radial run-out, H80R.MNCM incorporates AC variable speed motor and Heidenhain encoder for direct measurement positioning of -±5 arc sec. Programmable variable speed AC control (H1625.AC3) allows adjustment of continuous high-speed rotation and indexing, which can be used for automatic operation via M-Code. Spindle can also be integrated directly to certain...
Read More »Hirschmann Announces New Automation Division for Expanding Markets
HIRSCHMANN Engineering U.S.A., Inc., Elgin, Illinois, June 2007. Peter Knowles, President, announces the formation of a new division, HIRSCHMAN Automation LLC. This new division, located at HIRSCHMANN U.S.A. Headquarters will be led by Michael P. Rogers, who was recently named President of the new division. Rogers is responsible for the formation of the company sales, installation and software...
Read More »William Boehmert Joins Hirschmann Engineering as Regional Sales Manager
Peter Knowles, President, HIRSCHMANN Engineering USA, Inc., Elgin, Illinois, announces that William (Bill) Boehmert has joined HIRSCHMANN Engineering as a Regional Sales Manager. In his new position, Bill is responsible for selling and servicing the entire HIRSCHMANN product line in the Midwest region of the United States, which includes the states of Illinois, Wisconsin, Minnesota, Iowa,...
Read More »Hirschmann Receives EN 9100 Aerospace Certification
HIRSCHMANN Engineering U.S.A., Inc., of Elgin, Illinois recently announced that their parent company, HIRSCHMANN GmbH has received the EN 9100 Aerospace Series Certification. The certification's Quality Management System and requirements are based on ISO 9001: 2000, Quality Management Systems, which is technically equivalent to AS 9100 and JISQ 9100. The certificate was issued in Munich Germany...
Read More »