JMD Manufacturing, Inc.
Framingham, MA 01702
Desktop Decopying Unit destroys sensitive documents.
Offering alternative to shredders, low-noise Nano-DeCopier provides decopying and destruction of sensitive and confidential documents. Unit reduces paper to approximately 0.25 x 0.25 in. pieces after 3-minute cycle, which is impossible to reverse. Product uses non-toxic, green D-1200 cleaning mixture as decopying fluid, which is also available in gel/stick form.
Read More »
Trim Saw cuts copper and aluminum tubes.
Model 315 produces repeatable, smooth, parallel cuts that are burr-free and require little or no surface cleaning. Heavy-duty base table and sub-assembly provide structural support, while hydraulically actuated tube clamp anchors various sized tubes that can be cut simultaneously. Hydraulic motor drives blade, and hydraulic cylinder with feed valve feeds blade through tubes. Lubrication and...
Read More »
Batch Coders mark on curved/round/circular surfaces.
Shapex self-inking batch coders/stampers are available with hand batch coders/stampers for specific applications, interchangeable characters for customized messages, and fast drying inks. Product line includes: Bottomex Batch Coder, Capex Batch Coder, Curvex Batch Coder, Cupex Batch Coder, and Bottlex Batch Coder.
Read More »
Imprinter marks on any flat surface.
CC Series prints on cartons, caps, labels, metal parts, cans, and bags for top, side, or bottom coding. It can be used as semi-automatic marking system or works in fully automatic mode when mounted on form and fill system. Quick-change type holders allow frequent changing of print message, while calibrated ink cartridge holder allows better adjustment for consistent clear, sharp, and legible...
Read More »
Label Applicator does not dirty users' hands.
Fully programmable Tritone 100 label dispenser and applicator can be used in both vertical and horizontal positions. It applies labels with widths to 4 in. and lengths to 14 in. at rates of 1-30 meters/min. Stepper motor controlled Microprocessor control box provides LCD display for memory and change of label parameters. Tritone 100 works with conveyor speeds from 16 to 100 ft. per min.
Read More »
Precision Coder is designed for tight fit applications.
Model 6C Coder is 6 7/8 x 3 7/8 x 3 3/4 in. and can be used almost anywhere on production lines since it occupies little space. It includes snap on/snap off print cylinder and can print multi-color messages. Coder is also available with 4 oz ink feeding system for continuous non-stop production.
Read More »
Color Coder prints two lines at a time.
Twin Convertible Slimline Coder mounts two printing units on single mounting shaft running next to each other, offering flexibility in marking and coding products. It can print multiple lines in different colors, different fonts sizes, and in different locations on same carton. Color cartridges can be changed quickly. Coder can be mounted to any conveyor, cartoner, case sealer or processing...
Read More »
Desktop Decopying Unit destroys sensitive documents.
Offering alternative to shredders, low-noise Nano-DeCopier provides decopying and destruction of sensitive and confidential documents. Unit reduces paper to approximately 0.25 x 0.25 in. pieces after 3-minute cycle, which is impossible to reverse. Product uses non-toxic, green D-1200 cleaning mixture as decopying fluid, which is also available in gel/stick form.
Read More »
Trim Saw cuts copper and aluminum tubes.
Model 315 produces repeatable, smooth, parallel cuts that are burr-free and require little or no surface cleaning. Heavy-duty base table and sub-assembly provide structural support, while hydraulically actuated tube clamp anchors various sized tubes that can be cut simultaneously. Hydraulic motor drives blade, and hydraulic cylinder with feed valve feeds blade through tubes. Lubrication and...
Read More »
Batch Coders mark on curved/round/circular surfaces.
Shapex self-inking batch coders/stampers are available with hand batch coders/stampers for specific applications, interchangeable characters for customized messages, and fast drying inks. Product line includes: Bottomex Batch Coder, Capex Batch Coder, Curvex Batch Coder, Cupex Batch Coder, and Bottlex Batch Coder.
Read More »
Imprinter marks on any flat surface.
CC Series prints on cartons, caps, labels, metal parts, cans, and bags for top, side, or bottom coding. It can be used as semi-automatic marking system or works in fully automatic mode when mounted on form and fill system. Quick-change type holders allow frequent changing of print message, while calibrated ink cartridge holder allows better adjustment for consistent clear, sharp, and legible...
Read More »
Label Applicator does not dirty users' hands.
Fully programmable Tritone 100 label dispenser and applicator can be used in both vertical and horizontal positions. It applies labels with widths to 4 in. and lengths to 14 in. at rates of 1-30 meters/min. Stepper motor controlled Microprocessor control box provides LCD display for memory and change of label parameters. Tritone 100 works with conveyor speeds from 16 to 100 ft. per min.
Read More »
Precision Coder is designed for tight fit applications.
Model 6C Coder is 6 7/8 x 3 7/8 x 3 3/4 in. and can be used almost anywhere on production lines since it occupies little space. It includes snap on/snap off print cylinder and can print multi-color messages. Coder is also available with 4 oz ink feeding system for continuous non-stop production.
Read More »
Color Coder prints two lines at a time.
Twin Convertible Slimline Coder mounts two printing units on single mounting shaft running next to each other, offering flexibility in marking and coding products. It can print multiple lines in different colors, different fonts sizes, and in different locations on same carton. Color cartridges can be changed quickly. Coder can be mounted to any conveyor, cartoner, case sealer or processing...
Read More »