CULTEC, Inc.

Cultec Chambers Help Resolve Flooding for Wal-Mart Expansion
Architectural & Civil Engineering Products

Cultec Chambers Help Resolve Flooding for Wal-Mart Expansion

BROOKFIELD, CT/February 21, 2012 -Wal-Mart, (NYSE: WMT), an American multinational retailer corporation that runs chains of large discount department and warehouse stores, is undergoing an expansion to transform its Grand Prairie, Canada location into a Super Center. As part of the major renovation, the project included a reevaluation of the existing stormwater management practices to resolve...

Read More »
Cultec Infiltrative Chambers Help Recharge Groundwater at Polar Beverages' New Warehouse
Architectural & Civil Engineering Products

Cultec Infiltrative Chambers Help Recharge Groundwater at Polar Beverages' New Warehouse

BROOKFIELD, CT- Polar Beverages, the country's largest independent soft-drink bottler that mainly distributes its products in New England and upstate New York, has a manufacturing facility in Auburn, Mass., as well as several warehouses in the area. As the company faced the need for increased storage space, Polar leased a large warehouse in Auburn with an eye toward not only expanding its storage...

Read More »
CULTEC Recharger 150 & Contactor 100 Models Now Available with Internal Manifold Capability
Agricultural & Farming Products

CULTEC Recharger 150 & Contactor 100 Models Now Available with Internal Manifold Capability

BROOKFIELD, CT/March 18, 2010 - CULTEC, Inc. has added internal manifold capability to its RechargerÂ-® 150 and ContactorÂ-® 100 subsurface stormwater chambers. This feature allows for maximum design flexibility and also eliminates the need for costly fabricated pipe manifolds. Developed by CULTEC, the internal manifold is created by inserting a CULTEC HVLV(TM) SFCx2 Feed Connector into...

Read More »
Cultec's Stormwater Management System Offers Benefits for Pennsylvania Development
Architectural & Civil Engineering Products

Cultec's Stormwater Management System Offers Benefits for Pennsylvania Development

Cost, Performance & Design Flexibility Among System Advantages BROOKFIELD, CT/February 17, 2009 - The Floral Vale development in Lower Makefield, Penn. is a building complex designed primarily for doctors' offices and medical research facilities. Originally started in 1990, the project is now in its third phase of construction, and the engineers from Tri-State Engineering needed to design a...

Read More »
CULTEC Stormwater Chambers Added to BOSS International's StormNET Software by Popular Demand.
Electrical Equipment & Systems

CULTEC Stormwater Chambers Added to BOSS International's StormNET Software by Popular Demand.

BROOKFIELD, CT/January 22, 2009 - All CULTEC stormwater chambers are now modeled in BOSS International's StormNET-® software, including the new Recharger-® 330XL. CULTEC models were added to the software in response to inquiries from engineers, consulting firms, and municipalities who use the company's chambers to solve their stormwater management and septic leachfield needs. StormNET is a...

Read More »
Stormwater Chamber offers storage capacity of 52.2 ft-³/unit.
Architectural & Civil Engineering Products

Stormwater Chamber offers storage capacity of 52.2 ft-³/unit.

Measuring 30.5 in. high x 52 in. wide, and 8.5 ft long, RechargerÂ-® 330XL holds nearly 475 gallons and will provide minimum of 80 cu ft of storage when surrounded in stone. Two side portals allow manifolding to take place at any point within system, eliminating need to build external manifolds. Constructed of high-density polyethylene for chemical resistance, chamber can accept up to 24 in....

Read More »
Company News

Cultec Releases New Stormwater Management Design Guide

BROOKFIELD, CT – CULTEC, Inc. has released an updated version of its Stormwater Management Design Guide. The Design Guide provides the most up-to-date information for designing CULTEC stormwater systems in a condensed, easy-to-follow booklet with individual model-specific pages for easy reference. It includes the company’s latest technical and design information as well as drawing details...

Read More »
Cultec Chambers Help Resolve Flooding for Wal-Mart Expansion
Architectural & Civil Engineering Products

Cultec Chambers Help Resolve Flooding for Wal-Mart Expansion

BROOKFIELD, CT/February 21, 2012 -Wal-Mart, (NYSE: WMT), an American multinational retailer corporation that runs chains of large discount department and warehouse stores, is undergoing an expansion to transform its Grand Prairie, Canada location into a Super Center. As part of the major renovation, the project included a reevaluation of the existing stormwater management practices to resolve...

Read More »
Cultec Infiltrative Chambers Help Recharge Groundwater at Polar Beverages' New Warehouse
Architectural & Civil Engineering Products

Cultec Infiltrative Chambers Help Recharge Groundwater at Polar Beverages' New Warehouse

BROOKFIELD, CT- Polar Beverages, the country's largest independent soft-drink bottler that mainly distributes its products in New England and upstate New York, has a manufacturing facility in Auburn, Mass., as well as several warehouses in the area. As the company faced the need for increased storage space, Polar leased a large warehouse in Auburn with an eye toward not only expanding its storage...

Read More »
Company News

Cultec Steps up to Help U.S. Marines

BROOKFIELD, CT/March 3, 2011 - CULTEC, a Brookfield, Conn.-based company, is supporting two Marine Corps Family Foundation's drives to benefit the U.S. Marines. The first initiative is the Wounded Warriors drive supporting wounded Marines at the National Naval Medical Center in Bethesda, Md. They need new loose, slip-on basketball shorts, breakaway sweatpants, t-shirts, sweatshirts, DVDs, books,...

Read More »
Company News

CULTEC Celebrates 25th Year Anniversary of its Stormwater Chambers

Two Generations Build Family Business Into Stormwater Management Industry Leader BROOKFIELD, CT/February 16, 2011 - CULTEC is pleased to announce that it has marked 25 years since the introduction of its first plastic stormwater chamber. CULTEC specializes in manufacturing reliable and cost-effective stormwater and septic chambers and providing innovative solutions to help integrate its products...

Read More »
Company News

How to Model CULTEC Stormwater Chambers in HydroCAD

CULTEC & HydroCAD Software Solutions Offer a Free Webinar on October 12 BROOKFIELD, CT/August 23, 2010 - CULTEC, Inc. and HydroCAD Software Solutions, LLC will present a free webinar on how to model CULTEC stormwater chambers in HydroCADÂ-® on Tuesday, October 12, from 1-2 p.m. EDT. Peter Smart, developer and CEO at HydroCAD Software Solutions, and Fred Dotson, Vice President at CULTEC, will...

Read More »
Company News

CULTEC Offers New Literature: New Design Tools CD, Product Guide and Operation & Maintenance Guidelines

BROOKFIELD, CT/July 9, 2010 - CULTEC, Inc. has released a new Design Tools CD and updated product literature for its customers in the stormwater industry. The web-interactive Design Tools CD allows customers to download the most up-to-date product information, CAD drawings, design assistance tools, literature and videos. Additionally, CULTEC released updated technical literature providing...

Read More »
Company News

CULTEC Releases New Bed Design Aides

BROOKFIELD, CT/May 14, 2010 - CULTEC, Inc. has released its new Bed Design Aides that show how to draw ContactorÂ-® and RechargerÂ-® stormwater management systems in CAD for the customers who wish to do it manually. The Bed Design Aides are available for the following models: Contactor 100 and Recharger 150, 280, 330XL and V8. The Bed Design Aides offer engineers a visual starting point...

Read More »
Company News

CULTEC Offers New Design Guide

BROOKFIELD, CT/April 15, 2010 - CULTEC, Inc. has released a new Stormwater Management Design Guide. It includes the latest product, design and technical information for CULTEC's ContactorÂ-® and RechargerÂ-® plastic chambers. Customers will find manual system sizing calculations, instructions on how to use the company's Stormwater Design Calculator and CULTEC StormGenie(TM) as well as...

Read More »
CULTEC Recharger 150 & Contactor 100 Models Now Available with Internal Manifold Capability
Agricultural & Farming Products

CULTEC Recharger 150 & Contactor 100 Models Now Available with Internal Manifold Capability

BROOKFIELD, CT/March 18, 2010 - CULTEC, Inc. has added internal manifold capability to its RechargerÂ-® 150 and ContactorÂ-® 100 subsurface stormwater chambers. This feature allows for maximum design flexibility and also eliminates the need for costly fabricated pipe manifolds. Developed by CULTEC, the internal manifold is created by inserting a CULTEC HVLV(TM) SFCx2 Feed Connector into...

Read More »

All Topics