FKN Systek, Inc.

Singulate PCB Panels up to 24" Long with the K4000
Machinery & Machining Tools

Singulate PCB Panels up to 24" Long with the K4000

Motorized linear blade depanelizer safely and easily separates long Pre-Scored PCBs Depanelizing skip routed PCB panels up to 24 long is made simple and easy with FKN Systek's K4000 PCB singulator. Just place the bottom scoreline of the PCB onto the linear blade and step on a guarded foot switch to bring the circular blade across the top scoreline for clean separation of the PCB panels. Right and...

Read More »
Singulate Thin Pre-Scored Panels with Close Component Spacing
Machinery & Machining Tools

Singulate Thin Pre-Scored Panels with Close Component Spacing

Singulating .020 pre-scored PCBs can be problematic on standard depanelizers because the boards tend to flex when placed between cutting blades. Due to the symmetrical design of the blades and the extra stiffness given to the circular blade by using two bearings, this problem is largely eliminated when using the K7000 for separating thin PCB panels. The 12" (304 mm) long linear blade has a .030"...

Read More »
Economical Benchtop Depaneling Router
Computer Hardware & Peripherals

Economical Benchtop Depaneling Router

Singulating low volume tab routed PCBs to strict military specifications requires the right tool for the job. Now, with the benchtop PCB depaneling router from FKN Systek, applications requiring routing rather than punching are easily taken care of. This machine is also useful as a backup to high-speed programmable routers for short runs, and for separating thick back planes which cannot be...

Read More »
Safely Singulate Circular Tab Routed PCBs
Machinery & Machining Tools

Safely Singulate Circular Tab Routed PCBs

The FKN Systek N200 punch depanelizes odd shaped boards. The N200, is a top down air operated punch for separating tab routed Panels one tab at a time. An upper and lower matching knife blade is used to pinch the tabs apart. This method produces less stress on the PCB than a punch and die since the cutting action takes place from both sides. The standard die set consists of an upper and lower...

Read More »
PCB Guide Rails facilitate depaneling process.
Machinery & Machining Tools

PCB Guide Rails facilitate depaneling process.

Suitable for thin pre-scored printed circuit cards measuring .060 in. thick or less, K3000 Linear Blade PCB Singulators assure score-line of PCB matches up with linear blade of K3000 depanelizer, preventing blade run out. USA-made depanelizers come in 18 and 24 in. blade versions with adjustable front and back table that can be tilted, allowing separated panels to slide onto conveyor line....

Read More »
Pin Grid Array Extractors grab device from both sides.
Agricultural & Farming Products

Pin Grid Array Extractors grab device from both sides.

Available with 2 or 4 support legs, Pin Grid Array Extractors have adjustable grip claws with screw lock downs that gently remove PGA from socket as operator turns extraction screw. Surrounding components can be as close as .100 in. without interfering. Two-leg model extracts components of 10 x 10 or greater, while 4-leg model pulls PGAs of 16 x 16 to 22 x 22, lifting component by supporting all...

Read More »
Singulate Aluminum and Copper Pre-Scored Panels
Machinery & Machining Tools

Singulate Aluminum and Copper Pre-Scored Panels

Depanelizing 18" and up to 24" skip scored PCBs is made easy and convenient with the K3000 Linear blade PCB singulators. These "Made in the USA" manual PCB depanelizers are available in two versions. Simply place the bottom score-line of the PCB onto the linear blade and pull the circular blade across the top scorel-ine to cleanly separate the PCB panels. An adjustable front and back table can be...

Read More »
Pneumatic Wire Crimp Press has portable, versatile design.
Machinery & Machining Tools

Pneumatic Wire Crimp Press has portable, versatile design.

Able to accommodate dies from various manufacturers, C200 table-top crimp tool is operated using standard factory air (5 bar min) and offers max pressing capacity of 1,200 kp. Portable, bench top unit facilitates change of tools and setup for different crimp contacts. In addition to crimping bare and insulated crimp terminals, uses include assembling IDC connectors to ribbon cable, splitting...

Read More »
Low Cost Nibbler for Singulating Tab Routed Boards
Machinery & Machining Tools

Low Cost Nibbler for Singulating Tab Routed Boards

Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120 , .093" and .062". Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is...

Read More »
Singulate PCB Panels up to 24" Long with the K4000
Machinery & Machining Tools

Singulate PCB Panels up to 24" Long with the K4000

Motorized linear blade depanelizer safely and easily separates long Pre-Scored PCBs Depanelizing skip routed PCB panels up to 24 long is made simple and easy with FKN Systek's K4000 PCB singulator. Just place the bottom scoreline of the PCB onto the linear blade and step on a guarded foot switch to bring the circular blade across the top scoreline for clean separation of the PCB panels. Right and...

Read More »
Singulate Thin Pre-Scored Panels with Close Component Spacing
Machinery & Machining Tools

Singulate Thin Pre-Scored Panels with Close Component Spacing

Singulating .020 pre-scored PCBs can be problematic on standard depanelizers because the boards tend to flex when placed between cutting blades. Due to the symmetrical design of the blades and the extra stiffness given to the circular blade by using two bearings, this problem is largely eliminated when using the K7000 for separating thin PCB panels. The 12" (304 mm) long linear blade has a .030"...

Read More »
Economical Benchtop Depaneling Router
Computer Hardware & Peripherals

Economical Benchtop Depaneling Router

Singulating low volume tab routed PCBs to strict military specifications requires the right tool for the job. Now, with the benchtop PCB depaneling router from FKN Systek, applications requiring routing rather than punching are easily taken care of. This machine is also useful as a backup to high-speed programmable routers for short runs, and for separating thick back planes which cannot be...

Read More »
Safely Singulate Circular Tab Routed PCBs
Machinery & Machining Tools

Safely Singulate Circular Tab Routed PCBs

The FKN Systek N200 punch depanelizes odd shaped boards. The N200, is a top down air operated punch for separating tab routed Panels one tab at a time. An upper and lower matching knife blade is used to pinch the tabs apart. This method produces less stress on the PCB than a punch and die since the cutting action takes place from both sides. The standard die set consists of an upper and lower...

Read More »
PCB Guide Rails facilitate depaneling process.
Machinery & Machining Tools

PCB Guide Rails facilitate depaneling process.

Suitable for thin pre-scored printed circuit cards measuring .060 in. thick or less, K3000 Linear Blade PCB Singulators assure score-line of PCB matches up with linear blade of K3000 depanelizer, preventing blade run out. USA-made depanelizers come in 18 and 24 in. blade versions with adjustable front and back table that can be tilted, allowing separated panels to slide onto conveyor line....

Read More »
Pin Grid Array Extractors grab device from both sides.
Agricultural & Farming Products

Pin Grid Array Extractors grab device from both sides.

Available with 2 or 4 support legs, Pin Grid Array Extractors have adjustable grip claws with screw lock downs that gently remove PGA from socket as operator turns extraction screw. Surrounding components can be as close as .100 in. without interfering. Two-leg model extracts components of 10 x 10 or greater, while 4-leg model pulls PGAs of 16 x 16 to 22 x 22, lifting component by supporting all...

Read More »
Singulate Aluminum and Copper Pre-Scored Panels
Machinery & Machining Tools

Singulate Aluminum and Copper Pre-Scored Panels

Depanelizing 18" and up to 24" skip scored PCBs is made easy and convenient with the K3000 Linear blade PCB singulators. These "Made in the USA" manual PCB depanelizers are available in two versions. Simply place the bottom score-line of the PCB onto the linear blade and pull the circular blade across the top scorel-ine to cleanly separate the PCB panels. An adjustable front and back table can be...

Read More »
Pneumatic Wire Crimp Press has portable, versatile design.
Machinery & Machining Tools

Pneumatic Wire Crimp Press has portable, versatile design.

Able to accommodate dies from various manufacturers, C200 table-top crimp tool is operated using standard factory air (5 bar min) and offers max pressing capacity of 1,200 kp. Portable, bench top unit facilitates change of tools and setup for different crimp contacts. In addition to crimping bare and insulated crimp terminals, uses include assembling IDC connectors to ribbon cable, splitting...

Read More »
Low Cost Nibbler for Singulating Tab Routed Boards
Machinery & Machining Tools

Low Cost Nibbler for Singulating Tab Routed Boards

Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120 , .093" and .062". Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is...

Read More »

All Topics