Bomar Interconnect Products
Ledgewood, NJ 07852
Share:
Coaxial U-Shaped Adapter features 2 F push-on male connectors.
Eliminator(TM) Series coaxial F U Connector is engineered to eliminate cable assemblies in board-to-board applications or eliminate panel jumpers to same panel. Designed for video applications where equally spaced rows of female F connectors need be jumped horizontally or vertically, connector/adapter is true 75 ohm device is manufactured of brass, features gold-plated contacts, and is optimized...
Read More »Coaxial Adapter connects female Type G to male Type F.
Used to innerconnect threaded Type F to snap-on Type G coaxial connector, adapter 83119505 is true 75 ohm device optimized for CATV, set top box, and cable modem applications. It features beryllium copper spring mechanism for secure locking and high-density TFE insulator material. Precision engineered of machined brass, nickel-plated adapter exhibits RF leakage of -100 dB min @ 1 GHz and provides...
Read More »
Edgeboard Connectors are used for high power applications.
Targeted for applications requiring weatherproof, medium-size RF connector with consistent performance through 18 GHz, Type N V-Bite is applied to printed circuit boards for acceptance of cable or antenna terminations. Device offers impedance of 50 W and VSWR of 1.30. Manufactured of machined brass, RoHS-compliant devices have TeflonÃ-® dielectric and snap and lock in place for secure PCB...
Read More »
SMB Interconnect suits board-to-board applications.
Eliminator(TM) Series SMB right-angle interface allows direct connection to PCB without additional cables or connectors. Available in 50 and 75 Ω impedance, unit provides broadband performance with reflection from dc through 4 GHz. It is made from precision-machined brass with TFE insulators and gold-plated contacts. Connector features insulation resistance of 1,000 mΩ min, dielectric withstand...
Read More »
PCB Mount Connector suits RF and video applications.
Panel-grounded, dual BNC connector, Model X-2(TM) is nickel-plated zinc with gold-plated contacts and gray insulation outer cover. With optional metal back cover, unit offers 100% full shielding. Featuring quick-connect characteristics, connector is provided with impedance of 50 or 75 ohms, and in vertical or right angle stacked configurations. It offers VSWR to 500 MHz and meets or exceeds...
Read More »
Edgeboard Connector requires no adhesive.
MCX E-Snap(TM) LP has small protrusions inside slot, allowing connector to securely snap into previously solder-pasted hole as it is slid onto board. Subminiature unit occupies only 2.7 mm above, and 1.06 mm below board. It features straight-through contact design, 50 ohm impedance, and repeatable performance to 18 GHz. Connector is suited for dense packaging arrangements and may be specified for...
Read More »
RF Edgeboard Connector accepts RG59 or RG6 cables.
F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact...
Read More »
Coaxial U-Shaped Adapter features 2 F push-on male connectors.
Eliminator(TM) Series coaxial F U Connector is engineered to eliminate cable assemblies in board-to-board applications or eliminate panel jumpers to same panel. Designed for video applications where equally spaced rows of female F connectors need be jumped horizontally or vertically, connector/adapter is true 75 ohm device is manufactured of brass, features gold-plated contacts, and is optimized...
Read More »Bomar Interconnect Products, Inc. and Digi-Key Corporation Announce Global Distribution Agreement
Contract Covers Bomar's Portfolio of Quality Connectors and Accessories For RF, Video and Broadcast Transmission Ledgewood, NJ and Thief River Falls, MN, November 17, 2010...Bomar Interconnect Products Inc., a premier manufacturer and designer of quality connectors and accessories for RF, video and broadcast transmission, and Digi-Key Corporation, recognized by design engineers as having the...
Read More »Coaxial Adapter connects female Type G to male Type F.
Used to innerconnect threaded Type F to snap-on Type G coaxial connector, adapter 83119505 is true 75 ohm device optimized for CATV, set top box, and cable modem applications. It features beryllium copper spring mechanism for secure locking and high-density TFE insulator material. Precision engineered of machined brass, nickel-plated adapter exhibits RF leakage of -100 dB min @ 1 GHz and provides...
Read More »
Edgeboard Connectors are used for high power applications.
Targeted for applications requiring weatherproof, medium-size RF connector with consistent performance through 18 GHz, Type N V-Bite is applied to printed circuit boards for acceptance of cable or antenna terminations. Device offers impedance of 50 W and VSWR of 1.30. Manufactured of machined brass, RoHS-compliant devices have TeflonÃ-® dielectric and snap and lock in place for secure PCB...
Read More »
SMB Interconnect suits board-to-board applications.
Eliminator(TM) Series SMB right-angle interface allows direct connection to PCB without additional cables or connectors. Available in 50 and 75 Ω impedance, unit provides broadband performance with reflection from dc through 4 GHz. It is made from precision-machined brass with TFE insulators and gold-plated contacts. Connector features insulation resistance of 1,000 mΩ min, dielectric withstand...
Read More »
PCB Mount Connector suits RF and video applications.
Panel-grounded, dual BNC connector, Model X-2(TM) is nickel-plated zinc with gold-plated contacts and gray insulation outer cover. With optional metal back cover, unit offers 100% full shielding. Featuring quick-connect characteristics, connector is provided with impedance of 50 or 75 ohms, and in vertical or right angle stacked configurations. It offers VSWR to 500 MHz and meets or exceeds...
Read More »
Edgeboard Connector requires no adhesive.
MCX E-Snap(TM) LP has small protrusions inside slot, allowing connector to securely snap into previously solder-pasted hole as it is slid onto board. Subminiature unit occupies only 2.7 mm above, and 1.06 mm below board. It features straight-through contact design, 50 ohm impedance, and repeatable performance to 18 GHz. Connector is suited for dense packaging arrangements and may be specified for...
Read More »
RF Edgeboard Connector accepts RG59 or RG6 cables.
F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact...
Read More »