Company News

Cosasco, Inc.

11841 E. Smith Ave., Santa Fe Springs, CA, 90670, USA

  • 800-635-6898

Latest New Product News from
Cosasco, Inc.

Test & Measuring Instruments

Wireless Dataloggers enable remote corrosion monitoring.

Jul 15, 2016

Used where direct online operation is not possible, Bluetooth® dataloggers M-200, ER-200, and LPR-200 enable corrosion and erosion rate monitoring over 60 ft range via handheld transfer unit. ER-200 electrical resistance (ER) datalogger reads all ER standard and ER temperature probes, M-200 Microcor® ER datalogger reads all Microcor corrosion and erosion probes, while LPR-200... Read More

Electrical Equipment & Systems, Optics & Photonics, Sensors Monitors & Transducers, Test & Measuring Instruments

Corrosion Monitoring Transmitter has 1,500 ft wireless range.

Mar 20, 2015

Integrating with Yokogawa or any other ISA100 wireless system, ISA100 Microcor Wireless Transmitter (MWT-3905) employs high-resolution metal loss measurement that provides 18-bit resolution and supports operation in any process environment. Multiple units can be combined with wireless extenders to form network of up to 500 devices, and functionality enables users to choose star or... Read More

Fluid & Gas Flow Equipment

DBBV Service Valve features 6,000 psi rating.

Mar 03, 2015

Operating mechanically, Double Block and Bleed Service Valve features secondary ball/sealing surface to retain pressure in event that first ball or sealing surface is damaged. Rotating base lets users adjust position of handles to either open or close valve by rotating valve itself into correct position. Weighing 56 lb and operating at temperatures up to 450°F, depending on stem and seal... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Downhole Coupon Holder provides metal loss measurements.

Sep 06, 2013

Withstanding temperatures to 302°F and pressures to 10,000 psi, DCHA (Downhole Coupon Holder Assembly) indicates general corrosion behavior patterns and acts as secondary metal loss measurement of downhole tubing when used in conjunction with DCMS Downhole Tool for corrosion monitoring. Solution holds up to 9 coupon holders, including Bent Beam, Strip, and Cylindrical corrosion coupons. Three... Read More

Communication Systems & Equipment, Sensors Monitors & Transducers, Test & Measuring Instruments

Wireless Corrosion Transmitter works with water systems.

Oct 12, 2012

Measuring corrosion rate and pitting tendency, Corrater® CWT-9020 is designed for on-line monitoring of water systems in electrically hazardous areas with operating range of -40 to +70°C. Transmitter can be supplied as part of Cosasco® Wireless Corrosion Monitoring System or added to any Emerson Smart Wireless Network or output from gateway via Modbus Interface to any process... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Corrosion Under Insulation Sensors are offered in 3 types.

Jun 15, 2012

Used to detect corrosion under insulation, Cosasco CUI sensors fit in with any plant integrity management program. Continuous Insulated Braid (corrosion fuse) Wire, Inserted corrosion fuse probe array, and CUI Corrosometer® Probe all offer direct corrosion detection and may be customized to meet individual requirements and applications. Facilitating installation, inserted corrosion fuse probe... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Corrosion Sensors detect corrosion underneath insulation.

May 31, 2012

Comprised of continuous insulated braid corrosion fuse wire (Type 1), inserted corrosion fuse probe array (Type 2), and CUI Corrosometer® probe (Type 3), Cosasco CUI Corrosion Sensors are used for detection of corrosion under insulation. Design facilitates installation and may be customized to meet individual requirements and applications. Types 2 and 3 do not require removal of insulation... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Corrosion Sensors detect corrosion under insulation.

May 23, 2012

Offered in 3 types, CUI Corrosion Monitoring Sensors may be customized to meet requirements. Continuous Insulated Braid Wire Sensor, using insulated carbon steel wire as corrosion fuse, detects corrosion over large area. Inserted Probe Array Sensor acts as corrosion fuse detector that provides indication of corrosion occurring at pipe surface. Consisting of individual electrical resistance probe,... Read More

Mining, Oil Drilling, Refining Products & Equipment, Sensors Monitors & Transducers, Test & Measuring Instruments

Corrosion Monitoring Tool targets downhole environments.

Nov 22, 2011

Constructed of corrosion-resistant 17-4 PH SS, DCMS(TM) uses Corrosometer® electrical resistance corrosion probe element to determine rate of metal loss within downhole tubing. Tubular electronic instrument automatically reads and records corrosion probe at regular user-defined intervals. Upon retrieval of Downhole tool, corrosion rate history is downloaded to PC via Corrdata® II Software.... Read More

Portable Tools

Refacing Tool for Access Fittings restores corroded parts.

Jun 16, 2011

Within minutes and without requiring pipeline shutdown, COSASCO® Re-Facer Tool restores sealing face of corroded access fittings to like-new condition under full operating pressure. Portable tool, designed to facilitate in-field use, provides alternative to replacing corroded, pitted, or damaged access fittings. Available with pneumatic or electric drive options, tool splits to mount around OD... Read More

Machinery & Machining Tools

Re-Facer Tool restores sealing face of access fittings.

May 09, 2011

Available with pneumatic or electric drive options, COSASCO® Re-Facer Tool can repair corroded access fittings in pipelines under full operating pressure. Portable unit cuts and bevels surface area of fittings up to 0.020 in., including carbon steel and Hastelloy materials. Tool features feed rate of .0031 in. per trip, cutting speed of 30 sfpm, and cutting depths of 0.005, 0.010, and 0.020 in. Read More

Computer Hardware & Peripherals

Wireless Extender provides 1,000 ft range.

Dec 07, 2010

Designed for corrosion monitoring systems, Microcor Wireless Extender expands mesh networks when outlying wireless devices exceed range of mesh formed by other nodes and gateway. Unit integrates with wireless devices using WirelessHART 7 protocol and can be configured using Wireless Tools Software or Checkmate DL-W Wireless Configurator. Operating from -40 to 70°C, extender is Certified for... Read More

Computer Hardware & Peripherals

Wireless Extension Module increases network coverage 1,000 ft.

Dec 02, 2010

Intended for wireless corrosion monitoring systems, Microcor Wireless Extender (WE) offers means to expand mesh networks when outlying wireless devices exceed range of mesh formed by other nodes and gateway. It is certified for Class I/Zone 1 hazardous locations and integrates with wireless devices via WirelessHART 7 protocol. With typical life of 3 years, WE offer typical wireless range of 1,000... Read More

Fluid & Gas Flow Equipment, Sensors Monitors & Transducers

Safety Service Valve features max pressure rating of 3,600 psi.

May 07, 2010

Suited for use in oil and gas refineries, Double Block and Bleed Service Valve has secondary ball/sealing surface to retain pressure in event that first ball or sealing surface is damaged. Unit features 4130 alloy steel body, 17-4 PH stainless steel ball, fluoroloy stem and seals, and Viton O-ring. Operating at temperatures up to 450°F, NACE-compliant valve has rotating base and provides... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

Portable GPS Current Interrupter precisely monitors corrosion.

Mar 12, 2010

Supplied in weatherproof case, CORI-GPS utilizes GPS technology with user-programmable, 100 ms increment interruptions for corrosion monitoring. Each portable current interrupter obtains synchronization signal via GPS satellite, and interruption can be performed with ±5 msec accuracy. This results in corrosion monitoring data with close-interval surveys along pipeline without obtaining Instant... Read More

Test & Measuring Instruments

Data Logger enables accurate chemical flow monitoring.

Nov 05, 2009

Able to reduce chemical injection problems, RDC-CI Chemical Injection Data Logger monitors chemical flow through injection quills and nozzles to calculate chemical delivery rates. Data gathered in 0.0005 gal increments yields accurate flow rates over user-selectable time periods from 2 min to 1 day. Available for use with range of chemicals and temperatures from -40 to +158°F, logger accepts... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Side Stream Assembly measures corrosion/process parameters.

Jul 06, 2009

Ensuring piping assets are monitored against underprotection from corrosion damage, Cosasco® Side-Stream Assembly monitors parameters such as metal loss, corrosion rate, erosion rate, pressure, temperature, flow, and bacterial activity. Multiple 1 in. tees are included, which can be configured with Microcor® corrosion/erosion rate measuring, Corrater® LPR and galvanic measuring,... Read More

Test & Measuring Instruments

Bio Probes monitor microbiologically influenced corrosion.

Jul 02, 2009

Models 6205 and 6215 provide plant operators with functionality needed to collect samples for subsequent microbiological analyses in systems susceptible to microbiologically influenced corrosion (MIC). These retractable and retrievable bio-probes enable safe collection of sessile bacteria samples deposited on metal surface. Both have 5 sample elements, each with exposed frontal area of 1 cm²,... Read More

Fluid & Gas Flow Equipment, Test & Measuring Instruments

Measurement System maximizes corrosion inhibitor efficiency.

Jun 03, 2009

Configured to meet specific requirements, Side-Stream Assembly can measure metal loss, corrosion/erosion rates, pressure, temperature, flow, and bacterial activity in pipelines. It includes multiple 1 in. tees, each configured with choice of monitoring technologies, and provides data within minutes. Flexible and adaptable configuration does not require plant shutdown for installation, and design... Read More

Communication Systems & Equipment, Sensors Monitors & Transducers, Test & Measuring Instruments

Wireless Corrosion Monitor is rated for hazardous areas.

May 05, 2009

Microcor Wireless Transmitter uses high-resolution metal loss measurement that provides 18-bit resolution and is rated for operation in hazardous locations in temperatures from -40 to +70°C. Based on Microcor® technology, unit provides accurate corrosion rates in any process media in real-time. Each device will work as node in self-organizing mesh network to ensure consistent delivery of... Read More

Other Company News from
Cosasco, Inc.