Dataforth Corp.

MAQ20-DORLY20 Module features 150Vrms channel-to-channel isolation.
Electrical Equipment & Systems

MAQ20-DORLY20 Module features 150Vrms channel-to-channel isolation.

Offering 20 isolated SPST latching relay output channels, MAQ20-DORLY20 Data Acquisition and Control System Module’s each channel has contact state readback option. Integrating features such as advanced output functions, user defined logic polarity and fast switching times, unit comes with user configurable default output states. Product features 1500Vrms output-to-bus isolation and is designed...

Read More »
MAQ20® Data Acquisition and Control System meets ANSI/IEEE C37.90.1 standards.
Computer Hardware & Peripherals

MAQ20® Data Acquisition and Control System meets ANSI/IEEE C37.90.1 standards.

Available in MAQ20-DIV20/MAQ20-DIVC20 and MAQ20-DODC20SK models, MAQ20® Data Acquisition and Control System come with PID control, alarms, counters and timers. MAQ20-DIV20/MAQ20-DIVC20 modules offer 1500Vrms input-to-bus isolation and each channel is protected to 150Vrms overload. MAQ20-DODC20SK feature 1500 Vrms output-to-bus isolation and each channel is protected to 60VDC overload. Units are...

Read More »
Data Acquisition and Control System supports analog input modules.
Computer Hardware & Peripherals

Data Acquisition and Control System supports analog input modules.

MAQ®20 supports strain gage module (MAQ20-BRDG1), whichÂ- offers 4 input channels and can interface to full, half, and quarter bridge sensors using 4- or 6-wire connections. All channels are individually configurable. Also supported, frequency input module accepts zero-crossing and TTL signals with frequencies from 1 Hz to 1 MHz plus State Change and provides DC stimulus for...

Read More »
Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.
Agricultural & Farming Products

Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.

Able to interface to quarter, half, or full-bridge sensors using 4- or 6-wire connection, MAQ®20-BRDG1 provides 4 channels of strain gage input. Unit interfaces to transducers withÂ- nominal resistance of 100 Ω to 1 kΩ; four 24-bit data converters provide measurement capability with accuracy to ±0.05%; and anti-alias filtering eliminates signal degradation from environmental...

Read More »
Discrete I/O Module monitors high level AC and DC voltages.
Controls & Controllers

Discrete I/O Module monitors high level AC and DC voltages.

Measuring 15 mm wide, Model MAQ20-DIOH provides 4 isolated input channels and 4 isolated output channels. Module can perform two special functions on input channels — Event Counter and Time Between Events. Input channels interface to 90–280 Vac/Vdc signals, and output channels control 24–280 Vac signals at up to 3 Arms continuous. In case of inadvertent wiring errors or equipment fault,...

Read More »
Controls & Controllers

MAQ20 RTD/Potentiometer Module Ensures Exceptional Protection

Dataforth’s MAQ20® Industrial Data Acquisition & Control System features an analog resistance input module designed to provide outstanding channel protection. The MAQ20-RTD31 interfaces to 3 types of 3-wire sensors: 100Ω Pt and 120Ω Ni RTDs, and potentiometers up to 5kΩ. The module has 6 input channels, each of which is protected up to 240Vrms continuous overload in case of inadvertent...

Read More »
Electrical Equipment & Systems

Power Supply offers expansion, standby, and redundant power.

Available as accessory for MAQ20 Industrial Data Acquisition and Control System, MAQ20 Load Share Power Supply module can be installed in any I/O module slot on single backbone to provide additional power to system when I/O modules demand more power than Communications module can provide. Unit can also provide redundant power for loads under 3 A.Â- To ensure system is protected under fault...

Read More »
Data Acquisition System utilizes 7-language software.
Computer Hardware & Peripherals

Data Acquisition System utilizes 7-language software.

Available for MAQ®20 data acquisition/control system, IPEmotion Software provides synchronized data acquisition, automatic recognition of connected devices, automatic configuration of channels, automatic measuring, and instant visualization of all measurement values. System measures temperature, current/voltage, strain, pressure, frequencies, and rotational speeds, with live data display...

Read More »
Data Acquisition and Control System provides ±0.035% accuracy.
Computer Hardware & Peripherals

Data Acquisition and Control System provides ±0.035% accuracy.

Operating from 7-34 Vdc power source, MAQ®20 comprises programmable, multi-channel signal conditioning I/O modules as well as communication modules that mount on 35 x 7.5 mm gull-wing DIN rail. Backbone mounts within rail to provide power and communication interconnections. One communication module can interface to up to 24 I/O modules to create system with up to 384 channels that fits...

Read More »
Company News

Dataforth Announces Partnership with eagle.io

Dataforth Corporation has partnered with eagle.io to enable customers to use their MAQ20 system and eagle.io’s cloud-based software to build an IoT cloud-based remote monitoring system. Designed to remotely monitor environmental sensors, their website states that eagle.io enables users to “acquire data in real-time from any data logger or text file, transform data automatically using...

Read More »
Company News

Dataforth Announces Compliance with Latest ISO 9001:2015 & RoHS Quality Standards

Dataforth’s Quality Management System “has been assessed and found complying with the requirements of ISO 9001:2015,” states MCNA (Management Certification of North America). The certification applies to Dataforth locations at both 3331 E. Hemisphere Loop, Tucson, AZ, administrative, and 6230 South Country Club Road, Tucson, AZ, manufacturing. The certification scope covers the “design...

Read More »
Company News

Dataforth Celebrates 35 Years with Interactive Timeline

In 1984, Lee Payne established Dataforth Corporation, an entrepreneurial spinoff from Burr-Brown Corporation, in his garage. Thirty-five years later, the company is a world leader in Instrument Class® Industrial Electronics with two Tucson, AZ, locations and over 2,000 made-in-the-USA products. “I started Dataforth with the goal of designing, manufacturing, and marketing the best possible...

Read More »
Company News

Dataforth Offers Real-Time Online MAQ20R Demos

Dataforth Corporation has developed two online MAQ20 demonstrations that allow users to experience both real-time interaction with a MAQ20 and remote access to a MAQ20 system from anywhere. For the Process Simulator Interactive Demo, Dataforth built a hardware module that acts as a process simulator. Dataforth engineers connected this hardware to a MAQ20 and, using the Dataforth website, which...

Read More »
Company News

Dataforth MAQ20 Module Receives Honorable Mention in 2018 Engineers' Choice Awards

Dataforth’s MAQ20-DODC20SK module has been named the Honorable Mention in the Hardware - Data Acquisition category in Control Engineering’s 2018 Engineers’ Choice Awards program. Introduced in February 2017, the high density DODC20SK module has 20 isolated discrete output channels that can switch up to 60VDC signals and sink up to 3A of current. “We are extremely proud and honored to be...

Read More »
MAQ20-DORLY20 Module features 150Vrms channel-to-channel isolation.
Electrical Equipment & Systems

MAQ20-DORLY20 Module features 150Vrms channel-to-channel isolation.

Offering 20 isolated SPST latching relay output channels, MAQ20-DORLY20 Data Acquisition and Control System Module’s each channel has contact state readback option. Integrating features such as advanced output functions, user defined logic polarity and fast switching times, unit comes with user configurable default output states. Product features 1500Vrms output-to-bus isolation and is designed...

Read More »
MAQ20® Data Acquisition and Control System meets ANSI/IEEE C37.90.1 standards.
Computer Hardware & Peripherals

MAQ20® Data Acquisition and Control System meets ANSI/IEEE C37.90.1 standards.

Available in MAQ20-DIV20/MAQ20-DIVC20 and MAQ20-DODC20SK models, MAQ20® Data Acquisition and Control System come with PID control, alarms, counters and timers. MAQ20-DIV20/MAQ20-DIVC20 modules offer 1500Vrms input-to-bus isolation and each channel is protected to 150Vrms overload. MAQ20-DODC20SK feature 1500 Vrms output-to-bus isolation and each channel is protected to 60VDC overload. Units are...

Read More »
Data Acquisition and Control System supports analog input modules.
Computer Hardware & Peripherals

Data Acquisition and Control System supports analog input modules.

MAQ®20 supports strain gage module (MAQ20-BRDG1), whichÂ- offers 4 input channels and can interface to full, half, and quarter bridge sensors using 4- or 6-wire connections. All channels are individually configurable. Also supported, frequency input module accepts zero-crossing and TTL signals with frequencies from 1 Hz to 1 MHz plus State Change and provides DC stimulus for...

Read More »
Company News

Dataforth Releases Updated Corporate Capabilities Brochure

Dataforth has just published a new Corporate Capabilities Brochure presenting an overview of the company's full line of 1200+ data acquisition and control, signal conditioning, and data communication products. The 16-page document describes key features and specifications of these rugged, high performance Instrument Class industrial electronics, all designed to provide unparalleled isolation,...

Read More »
Company News

Updated MAQ®20 Brochure Now Available from Dataforth

Dataforth has just published a new, updated brochure describing the high performance MAQ20 industrial data acquisition and control system. The 4-page document provides an overview of the MAQ20 system and all current MAQ20 modules. In addition, it describes the Dataforth PID loop controller and the two software systems offered with the MAQ20: the advanced, intuitive IPEmotion data acquisition/test...

Read More »

All Topics