TDK-Lambda Americas Inc.
Suite 325
National City, CA 91950
New Open-Frame Buffer Modules Provide 380ms Additional Hold-up Time at up to 448 W
Remote on/off function can be activated to avoid an unsafe discharge of stored energy. Charge and discharge status can be monitored locally or remotely via a DC OK relay. Measures 175 x 85 x 57mm (L x W x H) in size.
Read More »
New PXG-M and PXD-M30 Series with 4:1 Input Ranges of 9 to 36 Vdc and 18 to 75 Vdc
PXG-M and PXD-M30 series is available in dimensions of 40.6 x 25.4 x 10.2 mm and 50.8 x 25.4 x 10.2 mm respectively. 5, 12, 15 and 24V single and +/-5, +/-12 and +/-15V dual outputs are available in all three power levels and units operate with convection cooling in ambient temperatures of -40°C to +105°C. Input to output isolation is 5,000 Vac which allows them to be used in multiple medical...
Read More »
New i7C Non-isolated DC-DC Converters Available with Input Range of 9 to 53 Vdc
Include an output voltage adjustment pin, positive or negative logic remote on-off, positive remote sense, plus input under-voltage, over-current and thermal protection. Feature up to 300 W in a 1/16th brick pin-out as well as enables a seamless transition from buck to boost operation. Suitable for medical, communications, industrial, test and measurement and battery powered equipment...
Read More »
New AC-DC Power Supply Measures 77.5 x 128 x 39.5 mm
CUS400M accepts an 85 to 264 VAC input and is available with 12 and 24 V outputs initially with 15, 19, 28, 36 and 48 V models following shortly. Available in open frame, metal baseplate, U channel and enclosed model. Suitable for home healthcare, medical, dental, test and measurement, broadcast and industrial equipment.
Read More »
New i7C Non-Isolated DC-DC Converters are IEC/UL/EN 62368-1, 60950-1 Certified
Offer input range of 9 to 53Vdc, and output can be adjusted from 9.6 to 48V. Features up to 300W in 1/16th brick pin-out, low component count and low airflow. Ideal for generating additional high power outputs, from existing 12, 24, 36 or 48V system voltages, in medical, communications, industrial, test and measurement and battery powered equipment.
Read More »
New PH600A280 DC-DC Converter Comes with Remote On-Off, Over-Current and Over-Voltage Protection
Offers efficiency of 93% and can operate at full load with baseplate temperatures of -40°C to +85°C, derating linearly to 80% load at +100°C. Accepts 200 to 425Vdc input that delivers 24V at 12.5A and is certified to IEC/EN/UL/CSA 62368-1, EN 62477-1 (OVC III) with CE marking. Ideal for HVDC (High Voltage Direct Current) equipment for data communications, high voltage transmission, renewable...
Read More »
New DC-DC Converters Meet IEC/EN/UL 62368-1 Standards
Uses step-down non-isolated power modules that operate from input range of 9 up to 53Vdc, with a wide adjustable output voltage range of 3.3 up to 24V. Ideal for generating additional low cost, high current outputs from an existing 24V bus in industrial, semi fabrication and test and measurement equipment. Offers single nominal output +12V 20A, dual output +12V 20A / +5V 20A and dual output +12V...
Read More »
New AC-DC Power Supply Series Includes Input to Output Isolation of 4,000 Vac
CUS600M delivers 400W (600W peak) in -20 oC to +40 oC ambient temperatures, derating linearly to 200 W load at +70 oC. Accepts an 85 to 264Vac input and has a no-load power consumption of less than 0.5W when the output is inhibited. Suitable for home healthcare, medical, dental, test and measurement, broadcast and industrial equipment.
Read More »
New TPS4000 24V Industrial Power Supply is IEC/EN/UL/CSA 60950-1 Certified
Features isolated AC Fail, DC Good and dropped phase signals, remote on/off, remote sense and 12V 0.3A standby supply. Delivers up to 4080W output power (24V at 170A) in a 2U high package and operates from a wide range Delta or Wye 350 - 528Vac three phase input. Offer PMBus™ communications interface that allows remote monitoring of the output voltage, output current, internal temperature,...
Read More »
New 2.7kW Power Supply Series Include Conversion Efficiencies up to 90.5% with Cooling Fan Speed Control
Offers five embedded front panel setup menus with user-selectable functions including internal resistance simulation and slew-rate control of output voltage/current. AC input options include single-phase 230VAC input, three-phase 208VAC input or a wide-range 400VAC/480VAC input. Suitable for design, test and measurement within the Laboratory/R&D environment and address broad market segments.
Read More »