Motion Engineering, Inc.
Santa Barbara, CA 93117
I/O Modules help simplify machine design.
SQIO line is comprised of SynqNet Interface Device offering up to 256 digital I/O and 16 analog I/O, plus analog and digital add-on boards. Total of 32 SynqNet Interface Devices can be installed on SynqNet network. Diagnostic capabilities allow for firmware/configuration file upgrade on nodes from any remote host computer. All programming is under single API, and is supported by library of I/O...
Read More »
Motion Controller enables advanced algorithms.
The 64-bit ZMP-PCI Motion Controller for SynqNetÃ-® utilizes 466 MHz PowerPC processor. With double-precision processing power, unit is optimized to work with company's MechaWare advanced servo development environment, and is compatible with Motion Programming Interface. SynqNet motion control network provides 100 Mbps synchronous real-time connection between motion controllers and...
Read More »
Motion Controller enables advanced algorithms.
With PMC form factor, 64-bit SynqNetÃ-® ZMP Motion Controller utilizes 466 MHz Motorola PowerPC processor and is optimized to work with MechaWare(TM) servo development environment. It supports servo update rates to 48 kHz, allowing optimal control of machines requiring high levels of coordination and synchronization between axes. Controller is compatible with Motion Programming Interface...
Read More »
I/O Modules integrate with XMP motion controls.
SLICE I/O line offers over 60 digital and analog I/O configurations and provides a single controller solution for all I/O and motion control requirements. Position latching and on-the-fly registration are enabled by close coupling of data. DIN-rail-mountable modules work with any XMP motion platform equipped with CANOpen master interface DS401 v2.0 node support or better. Each CANOpen node...
Read More »
Software offers Linux port for machine builders.
MPI motion-control programming environment consists of ANSI-standard C/C++ suite of motion libraries designed to accommodate advanced motion-control applications. Linux MPI port is fully compatible with SynqNet(TM) motion-network platforms. Linux source is Red Hat, Version 8.0.
Read More »
Software speeds motion system development time.
Controls Toolkit integrates BodeTool(TM) diagnostic program with FilterDesigner(TM) application, generating bode plots to identify resonances and apply control filters. BodeTool is configured via intuitive, menu-driven user interface to yield amplitude-frequency and phase-frequency diagrams. User can excite motion system with sinusoidal sweeps or FFT/random noise signals. Data is displayed for...
Read More »
Motion Controller includes full PC functionality.
Stand-alone motion controller, eXMP-SynqNet(TM) utilizes dual-processor architecture with scalable CeleronÃ-® processor running VxWorks, embedded NT, or other real-time operating systems along with XMP family SharcÃ-® DSP motion co-processor. Unit includes Ethernet, up to 4 COM ports, and on-board flash memory. It supports CAN networking for integrated I/O programming using Motion...
Read More »
Motion Controller supports CAN-based networking.
Model XMP-SynqNet-PCI provides 100 Mbps, real-time, synchronous networking for up to 32 axes. Servos can be updated as quickly as 20 kHz for 4 axes, or 10 kHz for 8 axes. SynqNet also supports user-defined I/O CAN-based networking under industry operating systems such as Windows NT, Windows 2000 and 95/98, VenturCom, and VxWorks. Powered by 32-bit floating point Analog Devices SHARC DSP, heart of...
Read More »
I/O Modules help simplify machine design.
SQIO line is comprised of SynqNet Interface Device offering up to 256 digital I/O and 16 analog I/O, plus analog and digital add-on boards. Total of 32 SynqNet Interface Devices can be installed on SynqNet network. Diagnostic capabilities allow for firmware/configuration file upgrade on nodes from any remote host computer. All programming is under single API, and is supported by library of I/O...
Read More »
Motion Controller enables advanced algorithms.
The 64-bit ZMP-PCI Motion Controller for SynqNetÃ-® utilizes 466 MHz PowerPC processor. With double-precision processing power, unit is optimized to work with company's MechaWare advanced servo development environment, and is compatible with Motion Programming Interface. SynqNet motion control network provides 100 Mbps synchronous real-time connection between motion controllers and...
Read More »
Motion Controller enables advanced algorithms.
With PMC form factor, 64-bit SynqNetÃ-® ZMP Motion Controller utilizes 466 MHz Motorola PowerPC processor and is optimized to work with MechaWare(TM) servo development environment. It supports servo update rates to 48 kHz, allowing optimal control of machines requiring high levels of coordination and synchronization between axes. Controller is compatible with Motion Programming Interface...
Read More »
I/O Modules integrate with XMP motion controls.
SLICE I/O line offers over 60 digital and analog I/O configurations and provides a single controller solution for all I/O and motion control requirements. Position latching and on-the-fly registration are enabled by close coupling of data. DIN-rail-mountable modules work with any XMP motion platform equipped with CANOpen master interface DS401 v2.0 node support or better. Each CANOpen node...
Read More »
Software offers Linux port for machine builders.
MPI motion-control programming environment consists of ANSI-standard C/C++ suite of motion libraries designed to accommodate advanced motion-control applications. Linux MPI port is fully compatible with SynqNet(TM) motion-network platforms. Linux source is Red Hat, Version 8.0.
Read More »
Software speeds motion system development time.
Controls Toolkit integrates BodeTool(TM) diagnostic program with FilterDesigner(TM) application, generating bode plots to identify resonances and apply control filters. BodeTool is configured via intuitive, menu-driven user interface to yield amplitude-frequency and phase-frequency diagrams. User can excite motion system with sinusoidal sweeps or FFT/random noise signals. Data is displayed for...
Read More »
Motion Controller includes full PC functionality.
Stand-alone motion controller, eXMP-SynqNet(TM) utilizes dual-processor architecture with scalable CeleronÃ-® processor running VxWorks, embedded NT, or other real-time operating systems along with XMP family SharcÃ-® DSP motion co-processor. Unit includes Ethernet, up to 4 COM ports, and on-board flash memory. It supports CAN networking for integrated I/O programming using Motion...
Read More »
Motion Controller supports CAN-based networking.
Model XMP-SynqNet-PCI provides 100 Mbps, real-time, synchronous networking for up to 32 axes. Servos can be updated as quickly as 20 kHz for 4 axes, or 10 kHz for 8 axes. SynqNet also supports user-defined I/O CAN-based networking under industry operating systems such as Windows NT, Windows 2000 and 95/98, VenturCom, and VxWorks. Powered by 32-bit floating point Analog Devices SHARC DSP, heart of...
Read More »