Connor-Winfield Corp.
Aurora, IL 60505
COSPAS-SARSAT TCXO is designed for distress transmitters.
Supplied in 5 x 7 mm ceramic SMT package, CSBxx Series is designed to be used as emergency beacon frequency references requiring tight Ã-
Read More »
Clock Generator targets GPS-based timing applications.
Operating from +3.3 V supply, TCXO-based Model FTS250 provides 1 pps CMOS output and generates 10 MHz CMOS and 10 MHz SINE output from voltage controlled crystal oscillator. Mixed signal PLL device can lock to 10 MHz reference derived from onboard GPS receiver, or to external 10 MHz or 1 pps reference. Alarms are provided to indicate Loss-of-Lock, Holdover, and Antenna Fault. Housed in 2.9 x...
Read More »
OCXO comes in 9 x 14 mm SMTpackage.
FC100 Series of 3.3 V CMOS or Clipped Sinewave OCXO is suited for 3G, Stratum 3, GPS and femtocell applications in standard frequencies of 10, 13, 19.2, 19.44, 20, 26 and 38.88 MHz. Device is stable at less than 200 ppb frequency offset over 0-70Ã-
Read More »
HCMOS Oscillator comes in standard CO8 Euro package.
Model XO125 is 5 V Voltage Controlled Oven Compensated Controlled Crystal Oscillator(VCOCXO) that comes with HCMOS output. It is designed for Stratum 3E applications requiring low aging rate and tight frequency stability, and offers standard frequencies at 10 and 12.8 MHz. RoHS compliant unit features voltage control, frequency stability of 10 ppb maximum, aging rate of 1 ppb/day maximum, and...
Read More »Synchronous Clock targets SETS applications.
Single-chip Model STC4130 accepts 12 reference inputs and generates 8 independent synchronized output clocks, which may be programmed for wide variety of SONET and SDH frequencies. Reference input frequencies are automatically detected, and inputs are individually monitored for quality. Providing 0.1 ppb hold over accuracy, Model STC4130 supports master/slave operation with SyncLink(TM)...
Read More »Crystal Clock Oscillators range to 260 MHz.
Housed in 5 x 7 mm package, fixed frequency SMT Clock Oscillators operate from 2.5 V with jitter less than 1 psec RMS. RoHS-compliant units are available in Ã-
Read More »
Crystal Oscillators offer frequency range up to 800 MHz.
Series V300/400/500 voltage controlled crystal oscillators come in 5 x 7.5 mm surface mount package with Enable/Disable function and various outputs, including LVPECL, CMOS, and LVDS. Jitter is less than 1 pS RMS for output frequencies less than 200 MHz and less than 3 pS RMS for output frequencies above 200 MHz. Operating at 3.3 V, units are intended for PLL systems in ATM/SONET/SDH applications...
Read More »
Synch Module includes Stratum 3E capabilities.
Measuring 2.05 x 1.25 x .75 in., SM3E timing module provides clock output that meets/exceeds Stratum 3E specifications given in GR-1244-CORE, GR-253-CORE, and ITU-T G.812. Complete system clock module features 8 auto select input references from 8 kHz to 77.76 MHz; phase build-out; and 3 CMOS outputs, 8 kHz to 77.76 MHz. Other offerings include hitless reference switching, master/slave operation...
Read More »
Synch Module suits Stratum 3 applications
Suited for synchronous timing source in SONET/SDH network elements, Model STC3500 integrated single-chip solution operates in free-run, locked, and hold-over modes. It supports master/slave operation, includes continuous input reference quality monitoring, and accepts 8 auto frequency detect reference inputs from 8 kHz to 77.76 MHz and one 8 kHz cross-reference. Module provides 4 output signals...
Read More »
Voltage Controlled SAW Oscillator suits SONET equipment.
Housed in low-profile 9 x 14 mm surface-mount package, VSPLD63TE acts as alternative for SONET equipment at 622.08 MHz. Low jitter in SONET bandwidth is less than 0.5 pS, and overall jitter is less than 3 pS. Oscillator has total frequency tolerance of 120 ppm with absolute pull range of Ã-
Read More »
COSPAS-SARSAT TCXO is designed for distress transmitters.
Supplied in 5 x 7 mm ceramic SMT package, CSBxx Series is designed to be used as emergency beacon frequency references requiring tight Ã-
Read More »
Clock Generator targets GPS-based timing applications.
Operating from +3.3 V supply, TCXO-based Model FTS250 provides 1 pps CMOS output and generates 10 MHz CMOS and 10 MHz SINE output from voltage controlled crystal oscillator. Mixed signal PLL device can lock to 10 MHz reference derived from onboard GPS receiver, or to external 10 MHz or 1 pps reference. Alarms are provided to indicate Loss-of-Lock, Holdover, and Antenna Fault. Housed in 2.9 x...
Read More »
OCXO comes in 9 x 14 mm SMTpackage.
FC100 Series of 3.3 V CMOS or Clipped Sinewave OCXO is suited for 3G, Stratum 3, GPS and femtocell applications in standard frequencies of 10, 13, 19.2, 19.44, 20, 26 and 38.88 MHz. Device is stable at less than 200 ppb frequency offset over 0-70Ã-
Read More »
HCMOS Oscillator comes in standard CO8 Euro package.
Model XO125 is 5 V Voltage Controlled Oven Compensated Controlled Crystal Oscillator(VCOCXO) that comes with HCMOS output. It is designed for Stratum 3E applications requiring low aging rate and tight frequency stability, and offers standard frequencies at 10 and 12.8 MHz. RoHS compliant unit features voltage control, frequency stability of 10 ppb maximum, aging rate of 1 ppb/day maximum, and...
Read More »Synchronous Clock targets SETS applications.
Single-chip Model STC4130 accepts 12 reference inputs and generates 8 independent synchronized output clocks, which may be programmed for wide variety of SONET and SDH frequencies. Reference input frequencies are automatically detected, and inputs are individually monitored for quality. Providing 0.1 ppb hold over accuracy, Model STC4130 supports master/slave operation with SyncLink(TM)...
Read More »Crystal Clock Oscillators range to 260 MHz.
Housed in 5 x 7 mm package, fixed frequency SMT Clock Oscillators operate from 2.5 V with jitter less than 1 psec RMS. RoHS-compliant units are available in Ã-
Read More »
Crystal Oscillators offer frequency range up to 800 MHz.
Series V300/400/500 voltage controlled crystal oscillators come in 5 x 7.5 mm surface mount package with Enable/Disable function and various outputs, including LVPECL, CMOS, and LVDS. Jitter is less than 1 pS RMS for output frequencies less than 200 MHz and less than 3 pS RMS for output frequencies above 200 MHz. Operating at 3.3 V, units are intended for PLL systems in ATM/SONET/SDH applications...
Read More »
Synch Module includes Stratum 3E capabilities.
Measuring 2.05 x 1.25 x .75 in., SM3E timing module provides clock output that meets/exceeds Stratum 3E specifications given in GR-1244-CORE, GR-253-CORE, and ITU-T G.812. Complete system clock module features 8 auto select input references from 8 kHz to 77.76 MHz; phase build-out; and 3 CMOS outputs, 8 kHz to 77.76 MHz. Other offerings include hitless reference switching, master/slave operation...
Read More »
Synch Module suits Stratum 3 applications
Suited for synchronous timing source in SONET/SDH network elements, Model STC3500 integrated single-chip solution operates in free-run, locked, and hold-over modes. It supports master/slave operation, includes continuous input reference quality monitoring, and accepts 8 auto frequency detect reference inputs from 8 kHz to 77.76 MHz and one 8 kHz cross-reference. Module provides 4 output signals...
Read More »
Voltage Controlled SAW Oscillator suits SONET equipment.
Housed in low-profile 9 x 14 mm surface-mount package, VSPLD63TE acts as alternative for SONET equipment at 622.08 MHz. Low jitter in SONET bandwidth is less than 0.5 pS, and overall jitter is less than 3 pS. Oscillator has total frequency tolerance of 120 ppm with absolute pull range of Ã-
Read More »