EMCO MAIER Corporation

Milling Center handles workpieces up to 2,500 mm diameter.
Laboratory and Research Supplies and Equipment

Milling Center handles workpieces up to 2,500 mm diameter.

Featuring bridge design with moving table and crossbeam, 5-axis Umill 1800 permits loading from top or front of machine. Portal-style system has working range of 2,150 mm on Y axis, 1,800 mm on X axis, and 1,250 mm in Z axis. Table can be dedicated to milling with rotation speed of 10 rpm and load capacity of 10 tons, or turning with speeds up to 250 rpm and load capacity of 5 tons. Rapid...

Read More »
Vertical Turning DUO Cell
Communication Systems & Equipment

Vertical Turning DUO Cell

The machining concept of vertical pick-up machines as a modular system meets manufacturing companies' requirements for more quality, while simultaneously maintaining high flexibility and reducing cost. The right-hand and left-hand versions of the EMCO Maier VT 160 and VT 250, when linked with one of three basic conveyor options -- oval, meander, and crossover-meander designs -- provide a complete...

Read More »
Vertical Turning Machine handles parts to 200 mm diameter.
Machinery & Machining Tools

Vertical Turning Machine handles parts to 200 mm diameter.

Equipped with 25 kW, 4,000 rpm main spindle that delivers 250 Nm torque, Model VT250 is designed for turning, drilling, and threading of chucking, cast, or forged parts. Max work piece turning diameter is 7.87 in. and max length is 5.91 in. Machine provides direct-driven travel of 20.9 x 12.2 in. in X and Z axes and ±3.5 in. in Y axis. Equipped with integrated pick-up system, VT250...

Read More »
Turning and Milling Center handles bar stock to 45 mm dia.
Laboratory and Research Supplies and Equipment

Turning and Milling Center handles bar stock to 45 mm dia.

In addition to 2 spindles, 2 turret tool systems with total of 24 driven tools, and VDI25 rapid change system, Hyperturn 45 includes Y axis with 70 mm travel in upper slide system and Z2 axis in lower slide system. Main and counter spindles are equipped with integrated water-cooled spindle motors with drive power of 15 kW, max speed of 7,000 rpm, and 100 Nm torque. Maximum turning diameter is 300...

Read More »
Laboratory and Research Supplies and Equipment

Multifunction Machine Tools perform milling and turning.

EMCOTURN 420MC has 2 main spindles, 2 counter spindles, and 2 tool turrets. It handles simultaneous machining of two parts without interruption or collisions. Digital drives produce performance in both main spindle and X and Z axes. HYPERTURN 665MC combines 4 axis turning capability with Y and B axes, adjustable milling spindle, cross-roller linear guides, and easily accessible tool turrets. It...

Read More »
Machinery & Machining Tools

Lathe has digital servo drives and 5.9 hp main spindle.

EMCOTURN 325-II inclined-bed machine features 1 in. bar stock or 3.75 in. chuck capability for machining parts up to 3.35 in. in diameter and 8.85 in. in length. It includes full C-axis with rapid traverse of 100 rpm and 12-station VDI 16 quick-change tool turret that holds up to six 1.6 hp driven tools at speed range of 200 to 5000 rpm for off-center drilling, milling, and thread cutting. ET...

Read More »
Milling Center handles workpieces up to 2,500 mm diameter.
Laboratory and Research Supplies and Equipment

Milling Center handles workpieces up to 2,500 mm diameter.

Featuring bridge design with moving table and crossbeam, 5-axis Umill 1800 permits loading from top or front of machine. Portal-style system has working range of 2,150 mm on Y axis, 1,800 mm on X axis, and 1,250 mm in Z axis. Table can be dedicated to milling with rotation speed of 10 rpm and load capacity of 10 tons, or turning with speeds up to 250 rpm and load capacity of 5 tons. Rapid...

Read More »
Vertical Turning DUO Cell
Communication Systems & Equipment

Vertical Turning DUO Cell

The machining concept of vertical pick-up machines as a modular system meets manufacturing companies' requirements for more quality, while simultaneously maintaining high flexibility and reducing cost. The right-hand and left-hand versions of the EMCO Maier VT 160 and VT 250, when linked with one of three basic conveyor options -- oval, meander, and crossover-meander designs -- provide a complete...

Read More »
Vertical Turning Machine handles parts to 200 mm diameter.
Machinery & Machining Tools

Vertical Turning Machine handles parts to 200 mm diameter.

Equipped with 25 kW, 4,000 rpm main spindle that delivers 250 Nm torque, Model VT250 is designed for turning, drilling, and threading of chucking, cast, or forged parts. Max work piece turning diameter is 7.87 in. and max length is 5.91 in. Machine provides direct-driven travel of 20.9 x 12.2 in. in X and Z axes and ±3.5 in. in Y axis. Equipped with integrated pick-up system, VT250...

Read More »
Turning and Milling Center handles bar stock to 45 mm dia.
Laboratory and Research Supplies and Equipment

Turning and Milling Center handles bar stock to 45 mm dia.

In addition to 2 spindles, 2 turret tool systems with total of 24 driven tools, and VDI25 rapid change system, Hyperturn 45 includes Y axis with 70 mm travel in upper slide system and Z2 axis in lower slide system. Main and counter spindles are equipped with integrated water-cooled spindle motors with drive power of 15 kW, max speed of 7,000 rpm, and 100 Nm torque. Maximum turning diameter is 300...

Read More »
Laboratory and Research Supplies and Equipment

Multifunction Machine Tools perform milling and turning.

EMCOTURN 420MC has 2 main spindles, 2 counter spindles, and 2 tool turrets. It handles simultaneous machining of two parts without interruption or collisions. Digital drives produce performance in both main spindle and X and Z axes. HYPERTURN 665MC combines 4 axis turning capability with Y and B axes, adjustable milling spindle, cross-roller linear guides, and easily accessible tool turrets. It...

Read More »
Machinery & Machining Tools

Lathe has digital servo drives and 5.9 hp main spindle.

EMCOTURN 325-II inclined-bed machine features 1 in. bar stock or 3.75 in. chuck capability for machining parts up to 3.35 in. in diameter and 8.85 in. in length. It includes full C-axis with rapid traverse of 100 rpm and 12-station VDI 16 quick-change tool turret that holds up to six 1.6 hp driven tools at speed range of 200 to 5000 rpm for off-center drilling, milling, and thread cutting. ET...

Read More »

All Topics