Anderson Power Products Inc.
Sterling, MA 01564
DC Power Connector features halogen-free design.
Rated at 600 Vdc, 25 A, Saf-D-GridÃ-® Ultra Short Receptacle is constructed withÃ- halogen-free, high-temperature housing and is size compatible with IEC 320 C13 and C14 AC standard panel cut out. Unit features Registered Product status for EMerge AllianceÃ-® standard for 380 Vdc power distribution systems used in data centers and telecom central offices. UL rated for safe disconnect...
Read More »
Ultra Short Receptacle supports 400 Vdc, 20 A loads.
UL rated for safe disconnect of 400 Vdc, 20 A loads, Saf-D-GridÃ-® Ultra Short Receptacle meets safety requirements for hazardous, low voltage applications per UL1977 and IEC 61984, as well as touch safety requirements of UL60950 and IEC60950.Ã- Proper voltage clearance and DC arc protection are achieved through unique geometries which minimize DC arc flash while shielding operator. Size...
Read More »
Electrical Connectors support extended wire size range.
Enabling design flexibility by allowing use of larger wires, SB120/PP120/PP180 Plus series are available with Extended Range Contacts. This increases amperage capability without enlarging actual product or altering housing. Series SB120 Plus models accept No. 1 AWG wire size, while PP120 Plus models accept No. 1 AWG and 1/0 sizes. Finally, PP180 Plus connectors accept No. 2/0 and 3/0 wire size.
Read More »
Multi Axial Connector features mechanically keyed housing.
Suited for medical and mobility applications, Multi Axial Rotational Connector (MARC) mates while traveling through arc with 3 in. minimum radius. Rated to 10,000 mating cycles and constructed of chemically resistant PBT plastic, product features 8 Powerpole circuits integrated into blind mate housing, 2 row horizontally oriented connector using flat wiping contacts. It is rated to 30 A, and can...
Read More »
Electrical Connector allows for 6 degrees of float.
Designed to interconnect 2 perpendicular power bus bars, Rocker Power Clip is used in N+1 rectifier and switching power supply applications. Device accepts solid .125 in. thick nickel or gold plated rectangular bus bar tab, which eliminates need for mating connector. Connector's design enables blind mating in deep racks, while small size facilitates dense power packing. Recognized to UL1977 and...
Read More »
High Density Connectors are rated for 30 A.
Offered in 3-30 circuits, PowerModÃ-® Connectors are available in straight PCB, right angle PCB, panel, or cable mountings. They feature mechanical polarized UL94V-O housings for proper circuit mating and up to 4 sequential pin mating options for mate-first/break-last and make-last/break-first circuits. Offered in 13 sizes, connectors have stainless steel positive retention latches and...
Read More »
Connector is built for safey and comes in 10 housing types.
Along with integral coding key that lets user configure unique mating of up to 6 individual connectors, RoHS-compliant PowerModÃ-® HP (high power) B series connector features touch-safe female housings, cable strain relief, and integral positive latches. It is rated up to 450 A and utilizes Sterling contact technology. Able to accommodate wire sizes from 1/0-4/0 AWG and 50-95mmÃ-²,...
Read More »PCB Connectors handle 55 A, 600 V max.
Horizontal and Vertical Mini-Powerclaws feature quick disconnect, hot-pluggable design, allowing system maintenance without need to power down system or unfasten ring type terminals. Both can be used with Powerpole 75 A and SB50 A connector, and when used as single pole contacts, do not require external housings. Powerpole and SB guide housing is available for Vertical contact to prevent user...
Read More »High-Power Connector is offered in 10 connector housings.
Rated over 350 A for appropriate applications and to 250 A @ 30Ã-ºC temperature rise, PowerModÃ-®HP B series features touch-safe (IP-20) female housings, integral positive latches, and cable strain relief. Series accommodates 1/0-4/0 AWG and 50-95 mmÃ-² wire sizes. In addition to Sterling contact technology, products provide 500 mating cycles min and are rated for circuit...
Read More »Power Connector is rated for 300 A continuous service.
Designed as interconnection between 2 perpendicular power bus bars, Power Clip is suited for N+1 rectifier, power supply, and switching power supply applications. Because clip accepts solid .125 in. thick nickel or gold-plated rectangular bus bar tab, there is no need for mating connector. Product is UL approved for true hot plug current interruption of 100 A at 48 V and 200 A at 42 V using gold...
Read More »
DC Power Connector features halogen-free design.
Rated at 600 Vdc, 25 A, Saf-D-GridÃ-® Ultra Short Receptacle is constructed withÃ- halogen-free, high-temperature housing and is size compatible with IEC 320 C13 and C14 AC standard panel cut out. Unit features Registered Product status for EMerge AllianceÃ-® standard for 380 Vdc power distribution systems used in data centers and telecom central offices. UL rated for safe disconnect...
Read More »
Ultra Short Receptacle supports 400 Vdc, 20 A loads.
UL rated for safe disconnect of 400 Vdc, 20 A loads, Saf-D-GridÃ-® Ultra Short Receptacle meets safety requirements for hazardous, low voltage applications per UL1977 and IEC 61984, as well as touch safety requirements of UL60950 and IEC60950.Ã- Proper voltage clearance and DC arc protection are achieved through unique geometries which minimize DC arc flash while shielding operator. Size...
Read More »Anderson Power Products-® Appoints Global Distributor
Anderson Power Products (APPÃ-®), a leader in the design and manufacture of interconnect solutions, is pleased to announce the authorization of Mouser Electronics as its Global Distributor serving the electronics industry. Mouser Electronics, Inc. is one of the fastest growing global semiconductor and electronic component distributors in the industry. Part of TTI Inc., and Berkshire Hathaway,...
Read More »
Electrical Connectors support extended wire size range.
Enabling design flexibility by allowing use of larger wires, SB120/PP120/PP180 Plus series are available with Extended Range Contacts. This increases amperage capability without enlarging actual product or altering housing. Series SB120 Plus models accept No. 1 AWG wire size, while PP120 Plus models accept No. 1 AWG and 1/0 sizes. Finally, PP180 Plus connectors accept No. 2/0 and 3/0 wire size.
Read More »
Multi Axial Connector features mechanically keyed housing.
Suited for medical and mobility applications, Multi Axial Rotational Connector (MARC) mates while traveling through arc with 3 in. minimum radius. Rated to 10,000 mating cycles and constructed of chemically resistant PBT plastic, product features 8 Powerpole circuits integrated into blind mate housing, 2 row horizontally oriented connector using flat wiping contacts. It is rated to 30 A, and can...
Read More »Anderson Power Products-® Introduces New Powerpole and Multipole Connector Catalog
Anderson Power Products (APP), a leader in power interconnect solutions, announces its new Powerpole and Multipole Connector catalog, featuring the Powerpole, PCB Series, Power Pak, Bus Bar, SBS, SB, SBE, SBO and SBX connectors. This new comprehensive ninety-two-page catalog highlights the significant features and benefits of each connector as well as specific technical information, product...
Read More »
Electrical Connector allows for 6 degrees of float.
Designed to interconnect 2 perpendicular power bus bars, Rocker Power Clip is used in N+1 rectifier and switching power supply applications. Device accepts solid .125 in. thick nickel or gold plated rectangular bus bar tab, which eliminates need for mating connector. Connector's design enables blind mating in deep racks, while small size facilitates dense power packing. Recognized to UL1977 and...
Read More »
High Density Connectors are rated for 30 A.
Offered in 3-30 circuits, PowerModÃ-® Connectors are available in straight PCB, right angle PCB, panel, or cable mountings. They feature mechanical polarized UL94V-O housings for proper circuit mating and up to 4 sequential pin mating options for mate-first/break-last and make-last/break-first circuits. Offered in 13 sizes, connectors have stainless steel positive retention latches and...
Read More »
Connector is built for safey and comes in 10 housing types.
Along with integral coding key that lets user configure unique mating of up to 6 individual connectors, RoHS-compliant PowerModÃ-® HP (high power) B series connector features touch-safe female housings, cable strain relief, and integral positive latches. It is rated up to 450 A and utilizes Sterling contact technology. Able to accommodate wire sizes from 1/0-4/0 AWG and 50-95mmÃ-²,...
Read More »Anderson Power Products-® Appoints Master Distributor
Anderson Power Products (APP), a leader in power interconnect solutions, is pleased to announce the franchise of Systems Material Handling (SMHÃ-®) as Master Distributor serving the material handling and motive power markets. As the largest distributor of parts and components for motive battery powered equipment in North America, SMHÃ-® is uniquely qualified to provide distribution...
Read More »