Endress+Hauser

New Liquiphant FTL51B and FTL41 Point Level Switches Meet SIL and WHG Requirements
Electrical Equipment & Systems

New Liquiphant FTL51B and FTL41 Point Level Switches Meet SIL and WHG Requirements

Features Industry 4.0 and IIoT capabilities that can detect point level of liquids in storage tanks, containers, and pipes. FTL51B works in process temperatures of -58 to 302°F (-50 to 150°C) and pressures up to 1450 psi, whereas FTL41 works at lower pressures, up to 580 psi (40 bar), and with narrower temperature range of -40 to 302 °F (-40 to 150 °C). Offers access via Bluetooth technology...

Read More »
Endress+Hauser Presents Liquiline CM82 Transmitter with Memosens Sensor Technology
Electrical Equipment & Systems

Endress+Hauser Presents Liquiline CM82 Transmitter with Memosens Sensor Technology

The Liquiline CM82 Transmitter comes in 11 cm x 2 cm (L x W) housing and accepts pH, ORP, pH/ORP, conductivity, oxygen and chlorine sensor signals. The device can be connected directly to a control component (PLC). The unit provides accessibility via 4-20mA HART or Bluetooth from iOS or Android device. The transmitter’s Memosens technology offers reliable data transmission with pre-calibrated...

Read More »
New Memosens CCS50D Chlorine Dioxide Sensor Offers Contactless Data Transmission
Sensors, Monitors & Transducers

New Memosens CCS50D Chlorine Dioxide Sensor Offers Contactless Data Transmission

The Memosens CCS50D Chlorine Dioxide Sensor comes with dirt-repellent material convex membrane that is resistant to biofouling. The sensors allow operators to pre-calibrate the sensors in the lab and swap them into the process with plug and play. The units provide reliable disinfection measurements at low flow rates (1.3 gal/h). The CCS50D sensors provide disinfection for drinking water,...

Read More »
Memosens COS81D Optical Sensor offers measurement accuracy up to ±0.2%.
Sensors, Monitors & Transducers

Memosens COS81D Optical Sensor offers measurement accuracy up to ±0.2%.

Memosens COS81D Optical Sensor used for measuring dissolved oxygen in fermenters and bioreactors in food, pharmaceutical and biotechnology industries. Unit operates in 15 to 280 °F temperature and 0 to190 psi pressure. Sensor is designed to withstand CIP and SIP procedures. Unit sends optical digital signal to a transmitter through cable and are available in C-shaped cap and a U-shaped cap...

Read More »
New Liquiphant FTL51B and FTL41 Point Level Switches Meet SIL and WHG Requirements
Electrical Equipment & Systems

New Liquiphant FTL51B and FTL41 Point Level Switches Meet SIL and WHG Requirements

Features Industry 4.0 and IIoT capabilities that can detect point level of liquids in storage tanks, containers, and pipes. FTL51B works in process temperatures of -58 to 302°F (-50 to 150°C) and pressures up to 1450 psi, whereas FTL41 works at lower pressures, up to 580 psi (40 bar), and with narrower temperature range of -40 to 302 °F (-40 to 150 °C). Offers access via Bluetooth technology...

Read More »
Company News

Endress+Hauser Canada to Build LEED Gold, Net Zero Carbon and Net Zero Energy into New $28-Million Customer Experience Centre in Burlington, Ontario

Burlington, ON, July 26, 2019 /CNW/ - Endress+Hauser Canada will build a new $28 million Customer Experience Centre a stone's throw from its current one here that will emphasize sustainability throughout while delivering a superior customer and employee experience. The new two-story, approximately 47,000 sq ft building endeavors to achieve the LEED Gold certification standard and to...

Read More »
Company News

Endress+Hauser Breaks Ground at New Gulf Coast Site

Automation company’s regional campus in Pearland, Texas to be completed by the end of 2020 March 8, 2019 – Endress+Hauser invests $38.5 million into a new 112,000 square-foot Gulf Coast Regional Center Campus. The company officially broke ground on March 7, 2019, at its new site in Pearland’s lower Kirby District, just outside of the Houston area. Completion is projected by the end of 2020....

Read More »
Endress+Hauser Presents Liquiline CM82 Transmitter with Memosens Sensor Technology
Electrical Equipment & Systems

Endress+Hauser Presents Liquiline CM82 Transmitter with Memosens Sensor Technology

The Liquiline CM82 Transmitter comes in 11 cm x 2 cm (L x W) housing and accepts pH, ORP, pH/ORP, conductivity, oxygen and chlorine sensor signals. The device can be connected directly to a control component (PLC). The unit provides accessibility via 4-20mA HART or Bluetooth from iOS or Android device. The transmitter’s Memosens technology offers reliable data transmission with pre-calibrated...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers