NIBCO
Elkhart, IN 46516
Ductile Iron Butterfly Valve suits non-steam applications.
Ranging from 2-12 in., 285 PSI butterfly valve is offered in wafer-style (WD 5022) and lug-style (LD 5022) as bare-stem, lever-operated, or manual gear-operated valves. Each is built with impact resistant, ductile iron body and features stainless steel trim with EPDM molded-in liner, which promotes bi-directional dead end service. Also included, one-piece solid stem (geometric drive) promotes...
Read More »
Ductile Iron Butterfly Valve suits non-steam applications.
Ranging from 2-12 in., 285 PSI butterfly valve is offered in wafer-style (WD 5022) and lug-style (LD 5022) as bare-stem, lever-operated, or manual gear-operated valves. Each is built with impact resistant, ductile iron body and features stainless steel trim with EPDM molded-in liner, which promotes bi-directional dead end service. Also included, one-piece solid stem (geometric drive) promotes...
Read More »Ball Valves meet low lead requirements.
Designed to meet or exceed requirements of NSF/ANSI 61-8/9, PermaLynx Series 300 consists of multi-purpose shut-off valves for hot and cold water systems and compressed air services. Units feature full port, forged brass body, chrome-plated brass ball, and push-to-connect ends. For sealing, valves utilize PTFE thrust washer, Viton-® O-ring, and PTFE packing. Offered in ½-2 in. sizes, valves...
Read More »Ball Valves meet low lead requirements.
Designed to meet or exceed requirements of NSF/ANSI 61-8/9, PermaLynx Series 300 consists of multi-purpose shut-off valves for hot and cold water systems and compressed air services. Units feature full port, forged brass body, chrome-plated brass ball, and push-to-connect ends. For sealing, valves utilize PTFE thrust washer, VitonÃ-® O-ring, and PTFE packing. Offered in ý-2 in. sizes,...
Read More »
Pipe Hanger/Restrainer has timesaving standoff design.
Available in sizes -¾-2 in., TOLCO(TM) Figure 28 provides contractors with standoff hanger and restrainer for CPVC plastic pipe. Single-piece, snap-in design facilitates installation by eliminating need for wood blocking extensions. Product feature flared edges to protect plastic pipe from scratches and abrasions. It meets NFPA 13 requirements and is UL Listed for installation into 3/8 in. thick...
Read More »
Pipe Hanger/Restrainer has timesaving standoff design.
Available in sizes Ã-¾-2 in., TOLCO(TM) Figure 28 provides contractors with standoff hanger and restrainer for CPVC plastic pipe. Single-piece, snap-in design facilitates installation by eliminating need for wood blocking extensions. Product feature flared edges to protect plastic pipe from scratches and abrasions. It meets NFPA 13 requirements and is UL Listed for installation into 3/8 in....
Read More »
Sway Brace Attachment features one-piece design.
In-line, longitudinal, Figure 4L braces against sway and seismic disturbances. Break-off head bolt verifies proper installation torque, and one-piece design allows swivel in only one direction. Carbon steel attachment has plain finish, with electro-galvanized or HDG finishes available. It features 2,015 lb horizontal design load and comes in sizes from 2-½ through 8 in. IPS. Unit is UL and cUL...
Read More »
Sway Brace Attachment features one-piece design.
In-line, longitudinal, Figure 4L braces against sway and seismic disturbances. Break-off head bolt verifies proper installation torque, and one-piece design allows swivel in only one direction. Carbon steel attachment has plain finish, with electro-galvanized or HDG finishes available. It features 2,015 lb horizontal design load and comes in sizes from 2Ã-½ through 8 in. IPS. Unit is UL and...
Read More »
Butterfly Valves suit industrial/mechanical HVAC services.
Butterfly valves are full-lug type valves suitable for bi-directional end of line service at full rated pressure. Series 6800 and 7800, class 150 and 300, respectively, meet MSS SP-68 requirements. Features include carbon steel body construction, stainless steel disc and stem, and PTFE seats and seals for chemical and heat resistance. The valves come in sizes from 2-1/2 to 24 in.
Read More »
Butterfly Valves suit industrial/mechanical HVAC services.
Butterfly valves are full-lug type valves suitable for bi-directional end of line service at full rated pressure. Series 6800 and 7800, class 150 and 300, respectively, meet MSS SP-68 requirements. Features include carbon steel body construction, stainless steel disc and stem, and PTFE seats and seals for chemical and heat resistance. The valves come in sizes from 2-1/2 to 24 in.
Read More »NIBCO Mourns Death of Pete Walker
ELKHART, Ind. - (September 18, 2008) - Pete Walker, 63, retired Chemtrol district manager for NIBCO INC., passed away on September 6, 2008, after an extended illness. He joined the company in 1986 as an industrial sales representative. He was promoted to regional sales manager - Chemtrol in 1989. In 2002, he was promoted to Chemtrol district manager and served in that capacity until his...
Read More »NIBCO Mourns Death of Pete Walker
ELKHART, Ind. - (September 18, 2008) - Pete Walker, 63, retired Chemtrol district manager for NIBCO INC., passed away on September 6, 2008, after an extended illness. He joined the company in 1986 as an industrial sales representative. He was promoted to regional sales manager - Chemtrol in 1989. In 2002, he was promoted to Chemtrol district manager and served in that capacity until his...
Read More »
Ductile Iron Butterfly Valve suits non-steam applications.
Ranging from 2-12 in., 285 PSI butterfly valve is offered in wafer-style (WD 5022) and lug-style (LD 5022) as bare-stem, lever-operated, or manual gear-operated valves. Each is built with impact resistant, ductile iron body and features stainless steel trim with EPDM molded-in liner, which promotes bi-directional dead end service. Also included, one-piece solid stem (geometric drive) promotes...
Read More »
Ductile Iron Butterfly Valve suits non-steam applications.
Ranging from 2-12 in., 285 PSI butterfly valve is offered in wafer-style (WD 5022) and lug-style (LD 5022) as bare-stem, lever-operated, or manual gear-operated valves. Each is built with impact resistant, ductile iron body and features stainless steel trim with EPDM molded-in liner, which promotes bi-directional dead end service. Also included, one-piece solid stem (geometric drive) promotes...
Read More »NIBCO Announces New Executive Structure
NIBCO Announces New Executive Structure ELKHART, Ind. -- (November 28, 2006) - NIBCO's Chairman and Chief Executive Officer Rex Martin announced today that the NIBCO Board of Directors has elected Steven Malm as its new president and chief operating officer effective immediately. Malm acquires the day-to-day responsibilities of running the business which had been formerly overseen by Rex Martin...
Read More »NIBCO Announces New Executive Structure
NIBCO Announces New Executive Structure ELKHART, Ind. -- (November 28, 2006) - NIBCO's Chairman and Chief Executive Officer Rex Martin announced today that the NIBCO Board of Directors has elected Steven Malm as its new president and chief operating officer effective immediately. Malm acquires the day-to-day responsibilities of running the business which had been formerly overseen by Rex Martin...
Read More »Ball Valves meet low lead requirements.
Designed to meet or exceed requirements of NSF/ANSI 61-8/9, PermaLynx Series 300 consists of multi-purpose shut-off valves for hot and cold water systems and compressed air services. Units feature full port, forged brass body, chrome-plated brass ball, and push-to-connect ends. For sealing, valves utilize PTFE thrust washer, Viton-® O-ring, and PTFE packing. Offered in ½-2 in. sizes, valves...
Read More »Ball Valves meet low lead requirements.
Designed to meet or exceed requirements of NSF/ANSI 61-8/9, PermaLynx Series 300 consists of multi-purpose shut-off valves for hot and cold water systems and compressed air services. Units feature full port, forged brass body, chrome-plated brass ball, and push-to-connect ends. For sealing, valves utilize PTFE thrust washer, VitonÃ-® O-ring, and PTFE packing. Offered in ý-2 in. sizes,...
Read More »
Pipe Hanger/Restrainer has timesaving standoff design.
Available in sizes -¾-2 in., TOLCO(TM) Figure 28 provides contractors with standoff hanger and restrainer for CPVC plastic pipe. Single-piece, snap-in design facilitates installation by eliminating need for wood blocking extensions. Product feature flared edges to protect plastic pipe from scratches and abrasions. It meets NFPA 13 requirements and is UL Listed for installation into 3/8 in. thick...
Read More »
Pipe Hanger/Restrainer has timesaving standoff design.
Available in sizes Ã-¾-2 in., TOLCO(TM) Figure 28 provides contractors with standoff hanger and restrainer for CPVC plastic pipe. Single-piece, snap-in design facilitates installation by eliminating need for wood blocking extensions. Product feature flared edges to protect plastic pipe from scratches and abrasions. It meets NFPA 13 requirements and is UL Listed for installation into 3/8 in....
Read More »