Hayward Flow Control

Compression Fittings are rated to 150 psi non-shock at 70°F.
Fluid & Gas Flow Equipment

Compression Fittings are rated to 150 psi non-shock at 70°F.

Featuring PVC upper and lower body construction with 17-7PH stainless steel wave spring, CCP Series Tank-Tite(TM) Compression Fittings provide constant load on gasket of bulkhead fitting to overcome and compensate for tank wall expansion/contraction due to changes in temperature and/or pressure within tank. Fittings also simultaneously impart constant load on bulkhead fitting nut, which minimizes...

Read More »
Bulkhead Fittings provide leak-free connections.
Electrical Equipment & Systems

Bulkhead Fittings provide leak-free connections.

Rated to 150 psi, BFAS Series Tank Adapters offer safe pipe connections to thermoplastic and metal storage tanks. Fitting design, which features short pattern barrel in PVC, CPVC, or PP and standard sized flange, also includes left hand threads to prevent fitting from unscrewing. Able to be installed by one person, products have hex body and FPM or EPDM gasket seal and come in sizes from ½-3...

Read More »
Manual Limit Switch offers multiple design options.
Electrical Equipment & Systems

Manual Limit Switch offers multiple design options.

Available in 2 sizes with either 2 or 4 limit switches, LHB Series will fit all sizes of TB Series ball valves and through 8 in. of BY Series butterfly valves. NEMA 4X-rated products operate over 20 to 200°F range and come in GF-PP housing with FPM seals and 304 stainless steel stem. Standard handles include T-handle or hand-lever and series features 2 adjustable, SPDT, 10 A @ 120 Vac...

Read More »
Needle Valve withstands harsh, corrosive environments.
Fluid & Gas Flow Equipment

Needle Valve withstands harsh, corrosive environments.

Offered in sizes from Â-¼-½ in., NVA Series is suited for fine flow regulation required in instrumentation and laboratory work. Fine pitch stem threads allow precise adjustment, and flow rates may be adjusted down to drops per minute. Available with PVC and GFPP materials and FPM seals, thermoplastic valve features integrated stem/PTFE seat, flanges for mounting panels, NPT threaded...

Read More »
Butterfly Valves target commercial swimming pools.
Fluid & Gas Flow Equipment

Butterfly Valves target commercial swimming pools.

Available in 2-8 in. sizes, PoolMaster(TM) Valves feature PVC body and disc with EPDM liner. Units are immune to electrolytic and galvanic corrosion, and contain no byproducts that can leach out and contaminate water and other sensitive fluids. One-piece body incorporates fully supported flanged bolt holes to prevent stressing of mating pipe flanges, while blowout-proof 316 SS shaft and full body...

Read More »
Reversing Electric Actuators simplify valve automation.
Mechanical Power Transmission

Reversing Electric Actuators simplify valve automation.

Designed for ball/butterfly valves up to 24 in., EPM Series Reversing Actuators provide torque outputs from 300-13,500 lb-in., and are available with positioners for on/off or modulating requirements. Reversing Spring Return Electric Actuators, EPS Series, suit valves up to 8 in. and offer torque from 450-2,300 lb-in., while EPL Series Linear Drive Actuators provide up to 4,400 lb down/up force...

Read More »
Fluid & Gas Flow Equipment

End Connection Packages suit variety of ball valves.

Available on all Â-½-2 in. PVC and Corzan® CPVC True Union, Z-Ball, and 3-way Ball Valves, Ball Valve End Connection Packages offer choice of socket or threaded connections. Packages are designed to minimize material waste, since only one set of end connections is typically used for each ball valve during installation. Units also eliminate contractor costs associated with disposing of...

Read More »
Diaphragm Valves handle corrosive fluids, abrasives, or slurries.
Fluid & Gas Flow Equipment

Diaphragm Valves handle corrosive fluids, abrasives, or slurries.

Available in manual or pneumatic/electric actuated models, DAB Series valves feature multi-turn design for precise control, and are rated to 150 psi. They can be used for on/off or throttling service, and are self-draining on one side. Choice of EPDM, FPM, or PTFE diaphragms are available to fit Â-½-6 in. PVC, ½-4 in. CPVC, ½-10 in. PPL, and ½-8 in. PVDF valve bodies,...

Read More »
Butterfly Valves have gear-operated, all-plastic design.
Fluid & Gas Flow Equipment

Butterfly Valves have gear-operated, all-plastic design.

Designed to replace metal valves in industrial piping systems, BYB Series lever-operated valves feature one-piece; 2-8 in.; PVC, CPVC, PPL, or PVDF plastic body with CPVC, PPL, or PVDF discs. They are offered with choice of FPM, Nitrile, or EPDM full face liners and have Type 410 SS stem completely isolated from process stream. Also available, 14-24 in. sizes add high-torque gear box. Options...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers