Hayward Flow Control

Construction Equipment and Supplies

Strainers and Valves feature True Union end connections.

Spring-loaded Y Check Valves, Y Check Valves, and Y Strainers are available with True Union end connections to fit Â-½-4 in. pipelines, permitting valves and strainers to be removed from piping system without breaking down system components. All plastic valves and strainers will never stick, jam, or fail from rust or corrosion, and help prevent damage to pumps, filters, and other process...

Read More »
Agricultural & Farming Products

Bus Controller suits piping systems with automated valves.

Used in piping systems with 8 or more electrically or pneumatically actuated valves, Bus Control System allows all actuators in system to be controlled by PLC with one pair of wires. Actuators are daisy chained on same pair of wires, with each actuator assigned unique address for identification by PLC. Only designated actuator has ability to read and act on control instructions. In addition to...

Read More »
Agricultural & Farming Products

Bus Controller suits piping systems with automated valves.

Used in piping systems with 8 or more electrically or pneumatically actuated valves, Bus Control System allows all actuators in system to be controlled by PLC with one pair of wires. Actuators are daisy chained on same pair of wires, with each actuator assigned unique address for identification by PLC. Only designated actuator has ability to read and act on control instructions. In addition to...

Read More »
Automated Ball Valves feature all-plastic construction.
Fluid & Gas Flow Equipment

Automated Ball Valves feature all-plastic construction.

Rated for full 225 psi, fully repairable EA Series has true union design and incorporates 110 Vac electric actuator with output torque of 140 lb-in. Built-in, automatic resetting thermal overload protector prevents motor burnout, and 25% duty cycle motor drives valve through permanently lubricated gear train. Featuring EPDM seals and PTFE seats, PVC valve is available in sizes for -½-2 in....

Read More »
Automated Ball Valves feature all-plastic construction.
Fluid & Gas Flow Equipment

Automated Ball Valves feature all-plastic construction.

Rated for full 225 psi, fully repairable EA Series has true union design and incorporates 110 Vac electric actuator with output torque of 140 lb-in. Built-in, automatic resetting thermal overload protector prevents motor burnout, and 25% duty cycle motor drives valve through permanently lubricated gear train. Featuring EPDM seals and PTFE seats, PVC valve is available in sizes for Â-½-2 in....

Read More »
Pneumatic Actuators provide automatic valve control.
Mechanical Power Transmission

Pneumatic Actuators provide automatic valve control.

Featuring 4-piston rack and pinion design, Series PCD and PCS work with range of all-plastic, corrosion-resistant ball and butterfly valves, from -¼ in. ball valves up to 24 in. butterfly valves. Torque outputs range from 60-15,800 lb-in. with minimum inlet air pressure of 80 psi. Double-acting Series PCD requires air pressure for both open and close cycles, while Series PCS utilizes mechanical...

Read More »
Pneumatic Actuators provide automatic valve control.
Mechanical Power Transmission

Pneumatic Actuators provide automatic valve control.

Featuring 4-piston rack and pinion design, Series PCD and PCS work with range of all-plastic, corrosion-resistant ball and butterfly valves, from Â-¼ in. ball valves up to 24 in. butterfly valves. Torque outputs range from 60-15,800 lb-in. with minimum inlet air pressure of 80 psi. Double-acting Series PCD requires air pressure for both open and close cycles, while Series PCS utilizes...

Read More »
Filtration System filters process fluid within tank.
Electronic Components & Devices

Filtration System filters process fluid within tank.

In-Tank Filtration System comes with 50 micron filter cartridge made of corrosion-resistant CPVC with FPM seals for chemical resistance. Single and double filter cartridge models are available, both with choice of WEBSTER(TM) brand Series D or S pumps, which are seal-less and can be run dry. Replacement cartridges are available in 1, 5, 10, 30, 75, and 100 micron ratings with 1 in. ID and 12-½...

Read More »
Filtration System filters process fluid within tank.
Electronic Components & Devices

Filtration System filters process fluid within tank.

In-Tank Filtration System comes with 50 micron filter cartridge made of corrosion-resistant CPVC with FPM seals for chemical resistance. Single and double filter cartridge models are available, both with choice of WEBSTER(TM) brand Series D or S pumps, which are seal-less and can be run dry. Replacement cartridges are available in 1, 5, 10, 30, 75, and 100 micron ratings with 1 in. ID and...

Read More »
Check Valve minimizes pressure drop.
Fluid & Gas Flow Equipment

Check Valve minimizes pressure drop.

Cepex Wafer Check Valves prevent reversal of flow in piping systems, protecting pumps, filters, and other process equipment. With straight through design, products operate without requiring adjustments or settings and will not stick, jam, or fail due to rust or corrosion. Valves, available to fit 4, 6, or 8 in. pipelines, feature PVC construction with flanged connections and choice of EPDM or FPM...

Read More »

All Topics