Blaser Swisslube Inc.
Goshen, NY 10924
Metalworking Fluid exhibits bio and chemical stability.
Formulated for use in heavy-duty machining applications over wide range of materials, Blasocut-® BC940 provides bio-chemical stability and extended sump life, without use of bactericides, while maintaining environmental health and safety. Optimized washing action and low misting properties contribute to machine and shop cleanliness. Suitable for use in hard or soft water, Blasocut-® BC940...
Read More »
Metalworking Fluid has vegetable-based formula.
Suited for high-pressure oil applications, Vascomill 10 features viscosity levels that allow for optimal air escape. This promotes foaming resistance, even in cycles where high pressure is engaged more than 50% of time. Environmentally conscious, vegetable ester-based cutting oil works with stainless steels, titanium, and high-temperature alloys in Swiss-style CNC lathes.
Read More »
Metalworking Fluid is designed for magnesium machining.
Exhibiting emulsion stability, BlasocutÃ-® for Magnesium Machining (BC37MG) optimizes part machining capabilities while minimizing waste in magnesium machining without separation. Mineral oil-based, chlorine-free liquid tool has formula that counters issues of instability, separations, and short fluid life. Also suitable for other ferrous and non-ferrous materials, such as brass and/or...
Read More »Metalworking Fluid works with difficult materials.
Containing vegetable oil-based esters, Vasco 5000 is suited for machining titanium, stainless steel, cobalt chrome, and other difficult to machine materials. Liquid tool exhibits cutting and grinding performance that promotes extended tool life, accelerated cycle times, and optimal surface finish. Sump life of Vasco 5000 maximizes uptime and minimizes disposal while rinse behavior is...
Read More »Cutting Oil features vegetable-based formula.
Derived from renewable raw materials, Vascomill 22 generates minimal mist, vapor, or smoke during use in CNC machinery performing operations with tough materials such as stainless steels, titanium, high-temperature alloys, and beryllium copper. Formula helps extend tool life and lubricity while promoting skin compatibility for operators. While universal for most operations and materials, oil can...
Read More »Grinding Fluids are able to run at low concentrations.
Offered in 2 versions, Grindex water miscible synthetic grinding fluids are suited for steel and iron. Mineral oil-free products provide optimal rinsing and settling behavior required in grinding operations. While Grindex 10 is considered common version, Grindex 10CO is highly inhibited for carbide grinding to prevent cobalt leaching. Both offer corrosion protection and are engineered to ensure...
Read More »
Vegetable Based Oil cuts metal and is user-friendly.
Vascomill 22 provides lubrication of CNC machinery for metal removal operations from low to high cutting speeds. Derived from renewable raw materials, oil has high flashpoint for viscosity, and generates minimal mist, vapor or smoke. Suitable for Swiss-automatic lathes, oil can be used in machining stainless steel, titanium, high temperature alloys, beryllium copper and in medical industry...
Read More »
Metalworking Fluid is formulated for soft water.
Developed for machining and grinding of ferrous and non-ferrous materials, mineral oil based BC20SW micro emulsion is suited for heavy duty or difficult operations. Biological concept eliminates need for tank side additives or biocides, and fluid provides foam control in soft water that contains less than 180 ppm calcium.
Read More »Emulsion Mixer provides coolant management.
Jetmix ensures completely uniform and homogenous emulsion through cavitation to mix water and concentrate consistently and correctly. It allows for adjustment of concentration and requires only water connection to operate. Cavitation in mixer results in microscopic oil droplet size of less than 0.1 Ã-µm diameter in emulsion. With max throughput of 7.9 gpm, maintenance-free Jetmix unit can be...
Read More »
Synthetic Cutting Fluid is formulated for hard metals.
Mineral oil-free Synergy 15(TM) cutting fluid is suitable for machining and grinding hard metals and copper alloys when oil free coolant is required. It can be used with hard or soft water, provides foam control, and achieves long term sump life without use of bactericides.
Read More »Metalworking Fluid exhibits bio and chemical stability.
Formulated for use in heavy-duty machining applications over wide range of materials, Blasocut-® BC940 provides bio-chemical stability and extended sump life, without use of bactericides, while maintaining environmental health and safety. Optimized washing action and low misting properties contribute to machine and shop cleanliness. Suitable for use in hard or soft water, Blasocut-® BC940...
Read More »
Metalworking Fluid has vegetable-based formula.
Suited for high-pressure oil applications, Vascomill 10 features viscosity levels that allow for optimal air escape. This promotes foaming resistance, even in cycles where high pressure is engaged more than 50% of time. Environmentally conscious, vegetable ester-based cutting oil works with stainless steels, titanium, and high-temperature alloys in Swiss-style CNC lathes.
Read More »Blaser Swisslube Celebrates 25 Years in North American Metalworking Industry
GOSHEN, N.Y. - Blaser Swisslube Inc., premier supplier of world-class, Swiss-quality metalworking fluids, celebrated its 25th anniversary in North America with an advanced training seminar for over 200 guests, including employees from Blaser's operations in Europe, Asia and South America. Attendees focused on providing know-how to improve the productivity of their customers. Blaser USA was...
Read More »
Metalworking Fluid is designed for magnesium machining.
Exhibiting emulsion stability, BlasocutÃ-® for Magnesium Machining (BC37MG) optimizes part machining capabilities while minimizing waste in magnesium machining without separation. Mineral oil-based, chlorine-free liquid tool has formula that counters issues of instability, separations, and short fluid life. Also suitable for other ferrous and non-ferrous materials, such as brass and/or...
Read More »Metalworking Fluid works with difficult materials.
Containing vegetable oil-based esters, Vasco 5000 is suited for machining titanium, stainless steel, cobalt chrome, and other difficult to machine materials. Liquid tool exhibits cutting and grinding performance that promotes extended tool life, accelerated cycle times, and optimal surface finish. Sump life of Vasco 5000 maximizes uptime and minimizes disposal while rinse behavior is...
Read More »Cutting Oil features vegetable-based formula.
Derived from renewable raw materials, Vascomill 22 generates minimal mist, vapor, or smoke during use in CNC machinery performing operations with tough materials such as stainless steels, titanium, high-temperature alloys, and beryllium copper. Formula helps extend tool life and lubricity while promoting skin compatibility for operators. While universal for most operations and materials, oil can...
Read More »Grinding Fluids are able to run at low concentrations.
Offered in 2 versions, Grindex water miscible synthetic grinding fluids are suited for steel and iron. Mineral oil-free products provide optimal rinsing and settling behavior required in grinding operations. While Grindex 10 is considered common version, Grindex 10CO is highly inhibited for carbide grinding to prevent cobalt leaching. Both offer corrosion protection and are engineered to ensure...
Read More »Blaser Swisslube Improves Coolant Literature
GOSHEN, N.Y. - Blaser Swisslube, Inc., premier supplier of world class, Swiss-quality metalworking fluids, now offers a new Plant Power addition to the Cool Liquid Tools catalog, a comprehensive guide to Blaser's coolant and cutting oil dependability. The illuminating Plant Power section describes the unique features and distinguished benefits of using vegetable oil technology. True to Blaser...
Read More »Blaser Swisslube to Exhibit at EASTEC
GOSHEN, N.Y. - Blaser Swisslube, Inc., premier supplier of world-class, Swiss-quality metal working fluids, will exhibit at the EASTEC Show from May 23-25. Blaser's engineers will be at Booth 1571 ready to provide high-performance solutions to your applications. Ask the knowledgeable Blaser representatives about Vasco, the vegetable oil-based emulsion for extremely demanding machining and...
Read More »Blaser Swisslube Hosts Liquid Tools Seminar
GOSHEN, N.Y. - Blaser Swisslube, Inc., premier supplier of world class, Swiss-quality metalworking fluids, will host a day and a half-long Liquid Tools Seminar that provides expert training and metalworking fluid know-how from experienced Blaser engineers. Blaser's engineers will cover topics ranging from Types of Fluids, Performance and Health & Safety Concerns to Corrosion, Biological Stability...
Read More »