AdvantaPure, Div. of NewAge Industries, Inc.

BPOG Extractables Testing of AdvantaPure®'s Key Silicone and TPE Tubing Products is Complete
Fluid & Gas Flow Equipment

BPOG Extractables Testing of AdvantaPure®'s Key Silicone and TPE Tubing Products is Complete

Test Results Help Drug Manufacturers Compare Tubing Southampton, Pa. — BPOG testing has been completed on AdvantaPure's primary product lines. The full BPOG (BioPhorum Operations Group) standardized extractables test protocol, involving six extraction solvents, tested to four different exposure times – 30 minutes, 7 days, 21 days and 70 days – and involving several analytical...

Read More »
New Silicon Tubing Designed For Cold Temperature Applications
Fluid & Gas Flow Equipment

New Silicon Tubing Designed For Cold Temperature Applications

The AdvantaSil Ultra Low Temperature Silicone Tubing is a new product from AdvantaPure that was designed for cold temperature applications in the biopharmaceutical and pharmaceutical industries. It was engineered to operate in a temperature range from -112 degrees Celsius to 175 degrees Celsius.  The silicon tubing is available in 5 sizes and it meets USP Class VI, FDA CFR 177.2600, ISO 10993...

Read More »
AdvantaPure® Completes Full BPOG Extractables Testing of Several Silicone and TPE Tubing Products
Fluid & Gas Flow Equipment

AdvantaPure® Completes Full BPOG Extractables Testing of Several Silicone and TPE Tubing Products

Provides Drug Manufacturers with Extensive Test Results for Tubing Comparison Southampton, Pa. — AdvantaPure announces that it has completed BPOG standardized extractables testing on three of its premier tubing products. The project took several months, from the start of product testing to AdvantaPure’s receipt of finished, comprehensive reports. Test results are now available by request....

Read More »
Food/Beverage Hoses minimize entrapment, blockage concerns.
Fluid & Gas Flow Equipment

Food/Beverage Hoses minimize entrapment, blockage concerns.

Constructed withÂ- high-purity, white, chlorobutyl rubber liner, beer and wine beverage grade Butyl Hose has green EPDM rubber outer cover and -40 to +240°F rating and comes in 1 ½, 2, and 3 in. ID sizes. Food and beverage grade Nitrile Hose, exhibiting increased flexibility, has abrasion-resistant gray nitrile rubber cover, comes in 6 sizes up to 4...

Read More »
Sealed Tubing Ends reduce operational expense, improve efficiency.
Fluid & Gas Flow Equipment

Sealed Tubing Ends reduce operational expense, improve efficiency.

Available with pre-sealed ends, AdvantaFlex® biopharmaceutical grade TPE tubing is made from FDA-approved ingredients, measuresÂ- 12 in. long, and comes in standard size of 1/8 in. ID x ¼ in. OD. AdvantaFlex Sealed Tubing Ends can be used with sterile tubing welders to aseptically terminate fluid paths and lessen need for aseptic disconnectors. Sealed tubing end welded...

Read More »
Wall Pass-Through System transfers critical fluids.
Fluid & Gas Flow Equipment

Wall Pass-Through System transfers critical fluids.

Designed for aseptic transfer ofÂ- critical fluids during pharmaceutical and biopharmaceutical production, AdvantaPass minimizes cross contamination risks. System combines single-use tubing and isolation chamber assemblies with in-wall, permanent stainless steel components to eliminate cleaning validations associated with clean room protocols. Since system conveys fluids without need to...

Read More »
Tubing Assemblies come in biopharmaceutical grade TPE.
Fluid & Gas Flow Equipment

Tubing Assemblies come in biopharmaceutical grade TPE.

Providing entire single-use molded manifold assemblies manufactured from TPE, AdvantaFlex® biopharmaceutical grade TPE is offered as molded Tri-Clamp® fittings, BioClosure(TM) container sealing systems, and connections such as wyes, tees, crosses, and reducers. Molded connections and container seals accommodate needs of those who require alternative to silicone but still desire batch...

Read More »
Sanitary Hose Fittings are available in variety of materials.
Fluid & Gas Flow Equipment

Sanitary Hose Fittings are available in variety of materials.

Designed for pharmaceutical, biologics, food and beverage, and chemical fluid flow applications, sanitary hose fittings include stainless steel, silicone, TPE, Hytrel®, and polypropylene options. Fittings mate with hose made from silicone, PTFE, FEP, PVC, EPDM, TPR, and TPE and are supplied attached to hose/tubing. Depending on type, fittings are offered in sanitary, pipe thread, and cam...

Read More »
Hose Identification Solutions from AdvantaPure® Help Reduce Errors
Automatic ID

Hose Identification Solutions from AdvantaPure® Help Reduce Errors

New Identification Methods Provide Customers With More Choices Southampton, Pa. - AdvantaPure offers several solutions for taking the guesswork out of hose and manifold identification. They give users a choice of viable identification strategies for critical process hoses used in the pharmaceutical, biopharmaceutical, biomedical, chemical, food, and beverage industries. Hose identification is...

Read More »
Molded Pipe/Tube Ends offer alternative to barb-style fittings.
Fasteners & Hardware

Molded Pipe/Tube Ends offer alternative to barb-style fittings.

Injection molded from USP (United States Pharmacopoeia) Class VI Hytrel® or polypropylene, Overmolded Tri-Clamp® Ends feature thermally mated materials without any leachable adhesives. Tri-Clamp or Mini Tri-Clamp styles are available for PVC, TPE, and TPR tubing and hose in pharmaceutical, medical, surgical, food, beverage, and dairy applications. Transition from tubing to Tri-Clamp...

Read More »
BPOG Extractables Testing of AdvantaPure®'s Key Silicone and TPE Tubing Products is Complete
Fluid & Gas Flow Equipment

BPOG Extractables Testing of AdvantaPure®'s Key Silicone and TPE Tubing Products is Complete

Test Results Help Drug Manufacturers Compare Tubing Southampton, Pa. — BPOG testing has been completed on AdvantaPure's primary product lines. The full BPOG (BioPhorum Operations Group) standardized extractables test protocol, involving six extraction solvents, tested to four different exposure times – 30 minutes, 7 days, 21 days and 70 days – and involving several analytical...

Read More »
New Silicon Tubing Designed For Cold Temperature Applications
Fluid & Gas Flow Equipment

New Silicon Tubing Designed For Cold Temperature Applications

The AdvantaSil Ultra Low Temperature Silicone Tubing is a new product from AdvantaPure that was designed for cold temperature applications in the biopharmaceutical and pharmaceutical industries. It was engineered to operate in a temperature range from -112 degrees Celsius to 175 degrees Celsius.  The silicon tubing is available in 5 sizes and it meets USP Class VI, FDA CFR 177.2600, ISO 10993...

Read More »
Company News

AdvantaPure® Introduces New Case Studies on Tubing, Closures and Molded Assemblies

Each Study Describes Processing Problems, Customer Goals, and Product Solutions Southampton, Pa. — AdvantaPure has released three new case studies focused on fluid transfer challenges involving biopharm and pharmaceutical applications. Each report details a customer's processing situation and the solutions explored with AdvantaPure's engineering staff to address problems. Diagrams...

Read More »
AdvantaPure® Completes Full BPOG Extractables Testing of Several Silicone and TPE Tubing Products
Fluid & Gas Flow Equipment

AdvantaPure® Completes Full BPOG Extractables Testing of Several Silicone and TPE Tubing Products

Provides Drug Manufacturers with Extensive Test Results for Tubing Comparison Southampton, Pa. — AdvantaPure announces that it has completed BPOG standardized extractables testing on three of its premier tubing products. The project took several months, from the start of product testing to AdvantaPure’s receipt of finished, comprehensive reports. Test results are now available by request....

Read More »
Company News

AdvantaPure® Contributes to Newly-Released Forecasting and Supply Planning Guide from BPOG

Combined Effort Aims to Improve Forecasting and Demand Planning Southampton, Pa. — A new guide intended to promote a collaborative working effort between biomanufacturers and their suppliers is now available from BPOG, the BioPhorum Operations Group. Dan Tropea, AdvantaPure’s Director of Supply Chain, helped co-author the guide along with several members of other end user and supplier...

Read More »
Food/Beverage Hoses minimize entrapment, blockage concerns.
Fluid & Gas Flow Equipment

Food/Beverage Hoses minimize entrapment, blockage concerns.

Constructed withÂ- high-purity, white, chlorobutyl rubber liner, beer and wine beverage grade Butyl Hose has green EPDM rubber outer cover and -40 to +240°F rating and comes in 1 ½, 2, and 3 in. ID sizes. Food and beverage grade Nitrile Hose, exhibiting increased flexibility, has abrasion-resistant gray nitrile rubber cover, comes in 6 sizes up to 4...

Read More »
Sealed Tubing Ends reduce operational expense, improve efficiency.
Fluid & Gas Flow Equipment

Sealed Tubing Ends reduce operational expense, improve efficiency.

Available with pre-sealed ends, AdvantaFlex® biopharmaceutical grade TPE tubing is made from FDA-approved ingredients, measuresÂ- 12 in. long, and comes in standard size of 1/8 in. ID x ¼ in. OD. AdvantaFlex Sealed Tubing Ends can be used with sterile tubing welders to aseptically terminate fluid paths and lessen need for aseptic disconnectors. Sealed tubing end welded...

Read More »
People in the News

AdvantaPure® Welcomes Mark Mistretta as East Coast Sales Manager

Sales Engineering Experience Will Assist Customers with Process System Integration Southampton, Pa.Â- – AdvantaPure announces the appointment of Mark Mistretta as its Regional Sales Manager for the United States’ east coast. Mistretta brings with him over 20 years of sales, engineering and consulting experience involving the biopharma and research industries. He will represent...

Read More »
People in the News

AdvantaPure® Announces New Eastern Regional Sales Manager

Handles Account Management Sales for Parts of U.S. Canada Southampton, Pa.Â- – AdvantaPure welcomes Lawrence Morano III as its new Eastern Regional Sales Manager. The position encompasses an expanded coverage area for the company’s pharmaceutical and biologics fluid processing products. AdvantaPure manufactures bulk silicone tubing, AdvantaFlex® biopharmaceutical grade TPE tubing,...

Read More »
Wall Pass-Through System transfers critical fluids.
Fluid & Gas Flow Equipment

Wall Pass-Through System transfers critical fluids.

Designed for aseptic transfer ofÂ- critical fluids during pharmaceutical and biopharmaceutical production, AdvantaPass minimizes cross contamination risks. System combines single-use tubing and isolation chamber assemblies with in-wall, permanent stainless steel components to eliminate cleaning validations associated with clean room protocols. Since system conveys fluids without need to...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers